That is a mad microsoldering skills. you made it look easy! That is insane! Susbsribed!
@user-ox7pb5us5g
11 ай бұрын
You’re an artist! Amazing skills.
@sthetixofficial
11 ай бұрын
Thank you! Cheers!
@OkiDingo
7 ай бұрын
T12-BC1 tip is what I used as well. It’s really good!!!
@minecraftgman69420
11 ай бұрын
amazing video! gonna download this incase it gets taken down again! keep up the good work!
@sthetixofficial
11 ай бұрын
Much appreciated!
@grant5357
2 ай бұрын
Where can i find that ribbon cable for the lite? Cant seem to find it anywhere Love the vids cheers
@sthetixofficial
2 ай бұрын
you can find it on ali
@george2781
9 ай бұрын
Hello sthetix I would like to install this mod kit on my lite, however I have absolutely no experience in soldering as a whole, let alone micro-soldering. Before I start doing anything to consoles I would first like to practice and learn soldering and micro-soldering, is there anything in particular that you recommend for this type of thing? Many thanks.
@sthetixofficial
9 ай бұрын
You'll need to practice soldering for small repairs before installing the modchip. For example, repair the Xbox or the PS3 analog stick. You will be confident later.
@george2781
9 ай бұрын
@@sthetixofficialI'll be sure to give those a try, thanks for the suggestion!
@foxlance
11 ай бұрын
My man, the gift that keeps on giving!
@jayjayhooksch1
4 ай бұрын
I got a v6 pico chip that looks like this v6 instinct chip (cable goes over the ram, under the cpu shield and bends over to install). Should work the same right? Flash chip, solder components, install chip, cut shield, reassemble, install sd card with cfw? Thanks for the videos and work you do they have been very helpful so far.
@sthetixofficial
4 ай бұрын
yes they are the same
@nekuuu
6 ай бұрын
Mr Sthetix, I installed a modchip following this tutorial and everything worked until the last step.. I extract the HATS pack into microSD card but when I put it back in the switch, it either fails to boot (modchip glows purple then green then shuts off with nothing displaying) or displays a message saying failed to boot init. Do you know anything about this? I tried formatting my microSD, I did this via Macbook, idk if that's an issue, any help would be appreciated.
@sthetixofficial
6 ай бұрын
try using other sd card brands.
@j.carlosrodriguez6030
5 күн бұрын
there it's some reason to cut the main metal shield? I never cut it, and never put kapton on chip, my console is working fine for a year
@sthetixofficial
5 күн бұрын
it depends on your thoughts. my thoughts say the chip is pressing the cpu shield when the metal shield is not cut. when you say nothing happens doesn't mean it is safe. you can think logically
@j.carlosrodriguez6030
5 күн бұрын
@@sthetixofficial ok I check that, thanks!
@loganchapman2236
5 ай бұрын
I have no power to chip and system after installing the ribbon cables. Any idea as to what could be happening? It boots up normally if the chip is disconnected.
@sthetixofficial
5 ай бұрын
maybe the ribbon cables is damaged? please check the soldering points for short.
@monokrome
11 ай бұрын
Hi! Thanks for the content. I was on your store an wondering if you would be able to do the Dialga and Palkia edition?
@sthetixofficial
11 ай бұрын
It is out of stock BUT you can do the same mod for the Dialga Palkia
@Zpheme12
2 ай бұрын
what type of soldering tip did you use at 5:15 to solder the cpu capacitors
@sthetixofficial
Ай бұрын
it is t12 bc1 tip
@thearchitecht2122
21 күн бұрын
Bro, did you watch the video on mute? they even stated which tip they are using
@acenewgen2623
6 ай бұрын
@sthetix I completed the mod and it boot fine into OFW and Hekate. However, when I tried to back up EMMC the unit would froze and locked up. Any pointer on what to do next? thank you.
@sthetixofficial
5 ай бұрын
try to replace the sdcard
@acenewgen2623
5 ай бұрын
@@sthetixofficial I got it fixed. I found one loose connection on the flex cable connector and maybe the cut off part on the heat shield is touching the usb port that might cause a short. Everything were corrected and now working like it should.
@nick_2k
5 ай бұрын
how come the soldering iron doesnt damage the cable? sorry for the stupid question, i am a noob when it comes to soldering
@sthetixofficial
5 ай бұрын
because it is heat proof.
@Chocolatething
9 ай бұрын
My Switch Lite shows the Instinct NX screen but it is unable to go through the OFW. Whenever I try I always get a blue screen. I also get a black screen while I try to boot the console with the sdcard inside.
@sthetixofficial
9 ай бұрын
Try to repair the nand withthe level1 guide.
@christopherfuentes8081
11 ай бұрын
Hi, I accidentally updated my switch to the latest firmware and now when I boot my switch the screen stays black, my emunand is working fine with the latest ams and hekate but sysnand is not!
@sthetixofficial
11 ай бұрын
try using my latest hats pack, 1.6.2, run sysmmc, it should work.
@OverLord-OvLd
11 ай бұрын
What would you more recommend, the new v6 Instinct NX or Picofly?
@sthetixofficial
11 ай бұрын
v6
@fatpandapop7221
11 ай бұрын
Is it the same process for picofly?
@jejak-penjajah_barat
Ай бұрын
Untuk nyolder dat0 hanya di versi oled ya gan?
@sthetixofficial
Ай бұрын
iya
@jejak-penjajah_barat
Ай бұрын
@@sthetixofficial satu lagi gan, kenapa harus memilih methode kamikaze daripada menggunakan dat0 adapter?
@Taco187
11 ай бұрын
Where can I get the kit ? I tried looking for it but all I can find is the v1,v2 and v3
@sthetixofficial
11 ай бұрын
you can dm me on X or twitter
@fisrtrepair
11 ай бұрын
🔝
@GraphicAxe
6 ай бұрын
is the process for the v6s on switch lite similar to this?
@sthetixofficial
6 ай бұрын
yes it is the same.
@saulkkk
9 ай бұрын
Hi, i need Contact to you, i have some problem with my nintendo switch lite after updating the instint v6 mod
@sthetixofficial
9 ай бұрын
Yes?
@JoachimPrestes
10 ай бұрын
Your discord invite link doesn’t work anymore on your about page
@sthetixofficial
10 ай бұрын
you can contact me directly.
@hussainjassim4386
11 ай бұрын
Can follow the same instructions for consoles v1 patched abd v2 ?
@sthetixofficial
11 ай бұрын
the concept is still the same.
@ChicagoMel23
4 ай бұрын
Why hide the battery info? And the switch logo?
@CropDudia480p
Ай бұрын
ninjas
@jonathana.1802
11 ай бұрын
I can't find any V6 any source/links?
@sthetixofficial
11 ай бұрын
it is on ali.
@TruSuCiO23
11 ай бұрын
Looks like the ninjas were at it again! Great video otherwise, here giving it its view from the previous one!
@sthetixofficial
11 ай бұрын
Thanks for the visit
@TruSuCiO23
11 ай бұрын
The mod kit and fpc kits are nowhere to be found 😢. Any recommendations or if they will be in stock again?
@Agz2828
11 ай бұрын
My switch never boots to hekate anymore after updating to 17! It only blinks Purple for a bit Then WHITE! Then straight to OFW Heelp! 😢😢😢
@sthetixofficial
11 ай бұрын
there is something wrong with the installation.
@Agz2828
11 ай бұрын
oh. okay. that happened to me before .. i just waited then its fixed again. Then this happend again. 😭
@itzSamito
11 ай бұрын
well done :)
@AlfarooqAlmenghawi
11 ай бұрын
🎉
@troycrees7391
10 ай бұрын
What about the sp caps anchor gnd points 😮
@sthetixofficial
10 ай бұрын
we dont need it, as it is included on the sp caps.
@falconmick
11 ай бұрын
Did you miss a logo in the original upload?
@sthetixofficial
11 ай бұрын
the logo is exposed in the original upload.
@TheClariceyNad
11 ай бұрын
Yoooooooo 🕺🕺🕺🕺🕺
@Jacobtgoat
11 ай бұрын
Can you make a tutorial of modding new nintendo 3ds systems?
@sthetixofficial
11 ай бұрын
it is there in my channel
@Jacobtgoat
11 ай бұрын
Thank you sir
@Veryrarebois
3 ай бұрын
Hello after soldering I got blinking pattern 🔵…🟡🟡…🟡🟡…🟡🟡 what could be the issue pls
Пікірлер: 79