Video explaining the main features, specifications and test operation of solenoid valve that can be used in residential automation and commercial water flow automation for application in automatic irrigation projects, bathtub and faucet automation, water box automation, decorative designs , aquariums, among other projects where it is necessary to automate the flow of water.
In the video test, a Sonoff brand WIFI relay is used in conjunction with the solenoid valve, which is responsible for the automation of the valve coil drive.
TECHNICAL CHARACTERISTICS OF THE VALVE SHOWN IN THE VIDEO
DIAMETER: 01 INPUT AND OUTPUT THREAD 1/2 "
BODY: THERMOPLASTIC
SUPPORT: BICROMATIZED
TERMINALS: FASTON 6.3mm
WORKING PRESSURE: 0.5 to 8.0 Kgf / cm² = 0,5 to 8Bar (Equivalent pressure of the street water network)
MAXIMUM WORKING TEMPERATURE: UP TO 60 °
MAXIMUM FLOW: 32 Lts / minute (variable according to pressure applied, see table in photo)
TENSION: 127Vac (alternating current 60Hz)
DIAPHRAGM (Internal Membrane): MAY BE IN NATURAL RUBBER OR ATOXIC SILICONE (intended for human consumption)
OBS:
- WORKS ONLY WITH WATER. DOES NOT WORK WITH AIR / FUELS / CHEMICALS
(VCC), THE MORE THAN PRESSURE, THE (A) MAJOR CURRENT IS REQUIRED
NORMALLY CLOSED (NF) OPENS WHEN ENERGIZED (Structural configuration, there is no way to change it)
- OPERATING TIME: THROUGH CYCLES: 7.5Min ON / 7.5Min OFF / LIFE UTIL 50,000 CYCLES
Негізгі бет Solenoid Valve - Water Flow Automation (Irrigation, Water Box, Bath, Aquarium, etc ...)
No video
Пікірлер: 637