Thanks for your tutorial, which is excellent. I did the same project in Inventor using the same specifications and it has come out perfect. I have added a few more constraints to the bucket and hydraulic cylinder to prevent it from tipping over. Keep up the good work. it keeeps me ticking in my old age. You are a genius and a decent bloke.
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@ahmadmomtazan2855
4 ай бұрын
Thank you for sharing the video. It would have been better to show the 2d plan of each part at the beginning. Thank you by the way
@glennfelpel9785
8 жыл бұрын
Very well done. This is good to watch as I have learned several new techniques I did not now existed in the modeling exercises. Thank you for sharing your knowledge.
@CADCAMTUTORIALBYMAHTABALAM
8 жыл бұрын
Thanks for watching i hope you enjoyed
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@HaiderSajjadkhan
Ай бұрын
can u please share detailed calculations which justify the length and everything
@harshrupani6949
5 жыл бұрын
can you please share all parts and assembly?
@theroadtonotown1616
3 жыл бұрын
Why were stabilizer and bucket on right plane, and the rest of parts were drawn the front plane? I understand the concept but I am not sure it would make a difference would it?
@tranducthien1987
5 жыл бұрын
Thank you for your tutorial. It is easy to understand.
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@CADTUTORIALmax
2 жыл бұрын
very useful, thank you for share!
@junaidhussain4781
3 жыл бұрын
CAD CAM tuturial, how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
It's very useful .. Can you send me a 2d drawings for these models ...
@Solidworks_Tutorials
4 жыл бұрын
I love this tutorial. Thank you for sharing
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@ocenerai3989
6 жыл бұрын
my solidworks is Future than urs so got lots of problem cant do assembly of piston n cylinder properly though its helpful im on my project work n thanks for ur drone video as well
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@marktgsxr
6 жыл бұрын
I love these tutorials,learnt so much from them! would you do one for an excavator scrap shear?
@junaidhussain4781
3 жыл бұрын
, how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@theroadtonotown1616
3 жыл бұрын
Can you please give a tutorial of an off shore knuckle boom crane in the very near future?
@qusai.al-awabdeh8227
2 жыл бұрын
Amazing tutorial, thanks a lot! How can I get the solidworks files u did in the video. I’d really appreciate it if you can share that!! 🙏
@kingkian9857
6 жыл бұрын
The assembly is under defined? Is there a way to fully define it quickly
@leongwaikin4090
3 жыл бұрын
can i know which model of backhoe is this?
@yazansy2258
3 жыл бұрын
What is the standard for this model and the name of the model
@kevalwalavalkar4292
6 жыл бұрын
Hey What is the material specs? Which material should we use for analysis in ANSYS?????
@ehabalshalah2978
8 жыл бұрын
Is it possible to draw complete excavator ?
@CADCAMTUTORIALBYMAHTABALAM
8 жыл бұрын
i already uploaded complete wheel loader video, and its body almost similar to excavator , Solidworks tutorial | Sketch Wheel Loader in Solidworks
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@3DimensionalCAD
7 жыл бұрын
The assembly is wrong!! First of all you assembled the arm to the feather with the wrong pair off holes.. and second there is one piston missing!! How will you achieve the "elbow" motion ? The parts are ok!! :)
@CADCAMTUTORIALBYMAHTABALAM
7 жыл бұрын
Thanks, its not complete. i will do a full excavator in future,
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@theblue2219
8 жыл бұрын
thank you so much .
@CADCAMTUTORIALBYMAHTABALAM
8 жыл бұрын
Thanks for watching i hope you enjoyed.
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@zxcv923111
7 жыл бұрын
Hi thanks for video. Can you draw whole excavator? (including cabin)
@CADCAMTUTORIALBYMAHTABALAM
7 жыл бұрын
i already made an Excavator, kzitem.info/news/bejne/yYJ9xXZtknmnjW0
@williamhuang5329
3 жыл бұрын
Hanzhen harmonic drive gear , industrial robot arm gear reducer
@3DimensionalCAD
7 жыл бұрын
in 7:33 you say tangent.. I think it's perpendicular! Sorry for correcting!!
@CADCAMTUTORIALBYMAHTABALAM
7 жыл бұрын
Thanks for correction i will do it here in my model,
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@muratkahvecioglu715
7 жыл бұрын
very thanks. can you drawing cat 320 excavator. (bucket, arm, boom)
@muratkahvecioglu715
7 жыл бұрын
1:16 model cat 320
@CADCAMTUTORIALBYMAHTABALAM
7 жыл бұрын
this is the simple model of bucket with arms.
@dickihendri4727
6 жыл бұрын
Nice tutorial dude, but you forget the fillet by the way.
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@souhig388
7 жыл бұрын
est ce que je peux avoir la vue eclater svp
@ehabalshalah4911
7 жыл бұрын
HELLO CAN YOU DRAWING CHAIN FOR EXCAVATOR ?
@CADCAMTUTORIALBYMAHTABALAM
7 жыл бұрын
ok i will try.
@ehabalshalah4911
7 жыл бұрын
Thanks
@ViniciusSouza-lk4co
8 жыл бұрын
like ......
@CADCAMTUTORIALBYMAHTABALAM
8 жыл бұрын
Thanks for watching i hope you enjoyed.
@sanjeewaranasinghe5763
8 жыл бұрын
Sir. how can I send you machine details now I haw all the details about machne?
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
@shameershah917
4 жыл бұрын
Can u please upload this file here?
@user-bm6sc5bu7v
4 ай бұрын
Drafting send
@sukumar4584
6 жыл бұрын
Please share 2d detail drawing To save the time easy make
@junaidhussain4781
3 жыл бұрын
how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.
Пікірлер: 71