Thanks a lot, after numerous other futile attempts your 4 minute video resolved my issue.
@jond1536
4 жыл бұрын
This solved quite a few issues with different items, I received a windows update to my Lenovo T420 with win 10 and it messed up my USB to Serial device, however using this guide I was able to correct it now my My GMC-080 Radiation Detector is back on the Radiation Network reading background radiation in the Portland, Oregon USA area. Great video as I hadn't had any issues for so long forgot how to do this. again Thank you j
@jpreller
3 жыл бұрын
Amazing, thank you. This is an example of how to produce a clear and concise video. My problem is now fixed thanks to your clear and concise instructions. Can't thank you enought.
@wicusconradie
4 жыл бұрын
Thanks! It worked! I have a 2010 Mecer UPS that still use serial interface. Couldn't use my USB to serial device since I upgraded to Windows 8. Did manual installs, etc. Manual picked the driver, etc. I was so desperate that I ordered a serial plug in adapter for my motherboard (Still have 1), but it never arrived in South Africa. Now I can set my UPS to shutdown when we have loadshedding again :)
@stephenthornber3522
4 жыл бұрын
I have been pulling my hair out over this. THANK YOU. One small thing I definately had to re-boot. The disconnect cable put back did not do it for me. THANKS again.
@ravenwolf3039
11 ай бұрын
This worked like a charm I bought another spare radio and just wanted to duplicate them but because the cable was outdated it would not work thanks for this video
@Eratosthenes0815
3 жыл бұрын
In 2021 this is still a problem. BUT: You helped me out... - Thanks a lot for this.
@chingersfreind
3 жыл бұрын
man!!!Such a helpfull video. I had such a stressful time trying to configure a Scorpion esc and when I followed your instruction with this driver Viola.....worked like a charm!!!! Thank you so much for your very informative video.
@fluttershy_meow
3 жыл бұрын
Thank you so much. I was trying for hours getting to work my prolific usb to serial work on windows 10 and finally this worked.
@n1kkri
Жыл бұрын
You my hero. I just upgrade a Windows 7 computer to 10 saving files and programs. For some reason a driver for a USB to ttl that communicates with a IC-746 with WTSJX (FT8) didn't work with a code 10. I tried a driver update but I kept getting the bogus message I already have the best driver. Nothing seemed to work. The driver you pointed out and method to use the older driver by selecting it manual worked perfectly. (So far) I have to say in my opinion for my uses. Windows 7 is better than 10. I find it harder to navigate than 7. But that's me
@FatherOwnage1
3 жыл бұрын
Many thanks, this was what I needed to get my ancient dusty old adapter to work so I could check 30+ switches donated to LANFest
@SturbokSensei
2 жыл бұрын
Thank you for the video. No idea Windows had updated the driver on its own!
@charleslord2433
3 жыл бұрын
Thanks! That did the trick for this old Chinese part that was locked out by the new driver!
@olafmezasandoval5251
3 жыл бұрын
Excellent solution, corrected the problem, highly recommended
@germang.4514
3 жыл бұрын
thank you so much!... I have been trying for hours with different drivers and this one worked.
@RadiotronicsUK
3 жыл бұрын
Glad it helped
@justin-xm2tf
2 жыл бұрын
thank you so much, i was going nuts on trying to figure out why my windows 10 laptop wasnt picking up my programming cable
@slickrickrp509
4 жыл бұрын
I had to pull out the USB device then re-plug to see the Model: Prolific driver 3200 that was downloaded. Great video!
@romansrv8468
Жыл бұрын
Thanks a lot! I have tried so many solutions, buit faild. Now I fixed my trouble with Silicon labs cp210x usb to uart bridge driver (I use it for ADAM 4561 Modbus RTU/USB converter). Thank you!!!
@sunilmaharjan744
Жыл бұрын
Wow!! That was a real flash solution to my problem, thanx.
@73dem6vmo7
5 жыл бұрын
Hi, nice video. Will it also work for mobile radios rather than handies? I have the Retevis RT90. I do not see any "Prolific driver" in my Device manager, though. Cheers. 73.
@sona184
2 жыл бұрын
Thank you for your support and your knowledge, this tip was useful to me!!!
@paulsteel8739
Жыл бұрын
Thank you. I have been going around in circles trying to get a driver that will work with my Inforad V4E, having had to go to a new computer.
@johnmiklor7023
5 жыл бұрын
Excellent Video describing the Procedure
2 жыл бұрын
Thanks a lot for this sharing ! Worked on my Win10 PC with MTP3100 device
@MxChay
Жыл бұрын
Yeahhhh! Thx for that! I have looked awhile to solve my connecting issu, you had the solution!
@hwoalang9
4 жыл бұрын
Worked - saved down time for me! appreciate it
@RadiotronicsUK
4 жыл бұрын
Glad it helped!
@ernst-udopeters1637
4 жыл бұрын
Happy to report this also worked for windows 7. Much obliged.
@pututson
4 жыл бұрын
Thank you much. It works for me. I am using Win10 64 bit. Greets from Indonesia.
@thebox5986
4 жыл бұрын
Help! I installed it but in device manager when I try to update the driver it only shows USB to serial cable option . No other options.
@mohitbajroliya750
4 жыл бұрын
Same
@denasluri644
5 жыл бұрын
Thanks man perfect solution
@pisetheng6149
4 жыл бұрын
wow! Worked for me on Windows 10, Thank you!
@gustavoaraque3621
3 жыл бұрын
Excellent, thanks for sharing it helped me a lot!
@shaheryaar
4 жыл бұрын
Thanks man. it was driving me nuts. Working now.
@ashishjadhav2271
3 жыл бұрын
Thank you. It is working now. Great help👍
@SurNavComms
4 жыл бұрын
Nice one!, 3.2 worked a treat.
@maidenfan19994
3 жыл бұрын
I have the same condition with the 3.2.0.0 driver installed. Where did I go wrong??
@Inspiration_seeker
2 жыл бұрын
thank you man you've saved me a lot of time 😇
@codyheinke1938
2 жыл бұрын
Thank you very much running older machines that folks would call rubbish
@rlong007
4 жыл бұрын
Great video! Worked like a charm!!
@EdgarSanchez-eq6rr
5 жыл бұрын
Thank you! Worked for me on Windows 10
@ArturB993
3 жыл бұрын
Did not solve. Still get code 10 error with Miklor driver. :(
@avinashckumar12
3 жыл бұрын
Perfect! Worked like a charm
@halladutchi
3 жыл бұрын
You're my hero, thank you so much!
@michaelstewart9956
3 жыл бұрын
Can not thank you enough for this help.
@Infomaticx
4 жыл бұрын
it works.. Run as administrator
@lightning7467
3 жыл бұрын
Solved my problem, thank you!
@El-gui
4 жыл бұрын
Many thanks , you saved my day !
@bradypalmquist9725
Жыл бұрын
THANKS. I can't believe I had to go back to that old of driver for my Baofeng cable to work. But it does! 73 de K0UC
@animenhanh4492
5 жыл бұрын
it works for me. thanks so much!
@vladimirponarin466
3 жыл бұрын
Thank you very much, really appreciated!
@connectandcontrol1063
4 жыл бұрын
Thanks man you helped me a lot , thankyou very much sir.
@Zly-Porucznik
4 жыл бұрын
Thanks, worked for my ELS27 now I can run Forscan!!!
@RadiotronicsUK
4 жыл бұрын
No problem 👍
@unknownforeverandever
4 жыл бұрын
Thanks man, you saved my day and week, thumbs up! :)
@eloisinaga
5 жыл бұрын
Thanks man, it perfectly working
@syedahadiasaleem270
3 жыл бұрын
Hey!! Thanks for the video, I have installed the driver but its not showing under model when I try to update
@Bardhylius
4 жыл бұрын
I used my USB-to-Serial cable without any issues for years until today when it suddenly stopped working. It's not even showing in my Ports section Device Manager. I've tried Add New Hardware and it just doesn't work. The Prolific drivers don't work either. The cable works fine on a different laptop and Windows recognizes it immediately. Something must be up with mine?
@FaridAk88
4 жыл бұрын
Thanks, mate, you saved my day!!!
@flaviogiuliani63
4 жыл бұрын
I have this error: Impossible start the device. (Codice 10) Not enough system resources to complete the API. A device driver has not been started. For more information, choose Driver Details from the Driver tab. How can I solve the problem?
@RadiotronicsUK
4 жыл бұрын
The video explains all.
@ilquartetto
5 жыл бұрын
can't update driver to the profilic 3.2.0.0 version, during updating process it returns to me this message: " the driver's device is been detected, but an error has occured during installation" what can it mean?
@almeidadtvrj
3 жыл бұрын
Hi from Brazi. I didi all the things showed in this video, but my Vertex C52 software reads until register 7 and then stops... What I am doing incorrectly?
@albertang6044
4 жыл бұрын
Thank You very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Useable for before 2012 version.
@dentonprior6670
3 жыл бұрын
Helped me out with a Current Cost meter that uses a usb-com cable. Many thanks! April 2021.
@normis5807
4 жыл бұрын
For mine it says STMicroelectronics Virtual COM Port and throws the error code 10. How can I fix it? My kids can't use the computer for distant learning homeworks, I need a solution ASAP please!
@kristiyandonokahono158
3 жыл бұрын
Thank you very much! It's helping me!
@miso1391
5 жыл бұрын
Thank you , it worked for me.
@sekohero
Жыл бұрын
THANK YOU YOU HELPED ME !!!!!
@JLMotorsportBrasil
Жыл бұрын
muito obrigado, funcionou 100%
@victorcorovai7970
3 жыл бұрын
Thanks for the video - the problem solved!
@constantinegiotopoulos3033
9 ай бұрын
You saved me, many thanks man.
@tangomike1306
3 жыл бұрын
After ALL THIS TIME, thank you.
@FAUST270
3 жыл бұрын
Will it work for an ipod on a windows 10? :(
@dmytrokruk
Жыл бұрын
Thank's! Another hardware, but the same problem with win10 and new version of drivers 😵
@audyzamora
2 жыл бұрын
muchas gracias me sirvio a la perfeccion
@marco2carriloo436
4 жыл бұрын
is it not necessary to send to the driver path to display the list?
@odedmazor
3 жыл бұрын
problem solved. thanks!
@rafaelcabrera9023
4 жыл бұрын
Very Helpfull. Thanks
@shilachibhowmick5557
4 жыл бұрын
I'm facing the same issue with inbuilt bluetooth in laptop .. OS is windows 8.1 . .. could you please help me to resolve the issue.
@tamerattia7692
5 жыл бұрын
Perfect solution !
@TutorBD
4 жыл бұрын
when i am plugged my pendrive , then shown this error messege. i am plugged this pendrive and show this error... Now how i can solve this problem ?
@topanthe_macrome6919
4 жыл бұрын
Nice solution for my win7..👌👍🙏
@jackblades1764
4 жыл бұрын
Will it work on Mass Storage Device?
@fernandokaminski1665
5 жыл бұрын
It worked, thanks!
@shoaibakhtar2484
5 жыл бұрын
Thanks man. You are awesome.
@kangtri3683
4 жыл бұрын
My problem at installing TP-Link TL-WN821N (in Windows 10 64 bit) any driver version has been installed but "The device cannot start. ( code 10) and Operation failed
@thanhnguyentuan1405
9 ай бұрын
thank you sir
@tpa3437
4 жыл бұрын
Very helpfull and clear thank you
@RadiotronicsUK
4 жыл бұрын
Glad it was helpful!
@sevketbediroglu
3 жыл бұрын
Best solution ,, too many thanksss
@renukashyap1918
2 жыл бұрын
What ll be the procedure for cp210x
@muratsenan7681
4 жыл бұрын
thank mate! perfect
@zidliykucuknazo
4 жыл бұрын
Thanks Alot. It worked for me.
@karlis282828
Жыл бұрын
It hepled me perfect. Awesome. Now it works
@siddhimali6273
5 жыл бұрын
Thank you
@ngongcarlson4280
3 жыл бұрын
Thanks you very much. it worked very well on my machine
@alfiendhika1368
5 жыл бұрын
Thanks mate, appreciated!
@sedatkazanc253
3 жыл бұрын
Unbeliveable, thanks dude..
@gabrielguzman9646
3 жыл бұрын
none of this crap works, i have done everything i could do and it still doesn't work. it definitely does work because it works on my laptop just find
@costintug
4 жыл бұрын
Big thank you!
@suedenym8666
4 жыл бұрын
Unfortunately it says it's for Vista only when I troubleshoot the download.
Пікірлер: 212