THANK YOU FOR THIS VIDEO! I was having the same issue with my NT treadmill and i bought the control board you mentioned off eBay and that fixed it.
@thehomerepairguy
Жыл бұрын
Glad it helped!
@Nottherealdonaldtrump
Жыл бұрын
Such a great Video! I think the Treadmill companies try super hard to hide how to diagnose and repair these yourself.
@thehomerepairguy
Жыл бұрын
Thanks. Glad you liked it.
@XKXKIXKXK
9 ай бұрын
Absolutely the manufacturers minimize the ability of the consumer to diagnose and repair. I have a True treadmill and have an issue with an error that does not appear in the manual. I contacted True and the first thing the guy said to me after I thoroughly explained the issue was, "I can contact a regional repairman for you." NO, that's note what I want, I want you to tell me what the error code means! So many consumer products have helpful customer support lines...why do treadmill manufacturers make it so complicated (I know, $$$$).
@tanziefowler7983
7 ай бұрын
0:30 @@XKXKIXKXK
@benh2134
6 күн бұрын
Replaced my nordictrack 10i control board. Now the speed is waaay off. Any idea how to recalibration the speed on this model?
@thehomerepairguy
4 күн бұрын
I'm not sure, but the guy I got my board from was super knowledgeable. Try checking with your board seller.
@Lorob854
Жыл бұрын
Thanks for this!! Mine stopped working today. I have had it for only 12 months!! And for like 9 of those months it was stored. So krs lightly used and I can't believe it just stopped working
@thehomerepairguy
Жыл бұрын
Glad it helped!
@deliainspired9722
3 ай бұрын
My Nordictrack tradmill have the same problem...i can't do the fixing that you just did...I want to sell it off.
@thehomerepairguy
3 ай бұрын
Maybe someone will buy it for parts
@jasleenjohal-uz8zs
4 ай бұрын
I have a PFTL13118.1 ProForm treadmill with the same problem. The control panel also flashes red lights as well. How can I replace it? And what kind would I need to replace it?
@thehomerepairguy
4 ай бұрын
Go to the link in the video description. I ordered from that guy and he is very knowledgeable and willing to help.
@SonalJain0403
4 ай бұрын
I had a similar problem and I did what you have demonstrated here. After replacing the board the treadmill runs ok if I don't step on it, if I am on it runs for 32 seconds exactly. After the 32 seconds it stops. Then I have to press the stop button and start it again, it runs for another 32 seconds and then stops. I called a servicing company to re-align the belt and they did. So I know this is not a belt problem. They also lubricated the inner side of the belt. At this time it's looking like it is either a controller problem (faulty replacement controller) or the motor problem which seems unlikely given the motor is working when I am not on it. Any ideas what I can try?
@thehomerepairguy
4 ай бұрын
Yeah, check the blinking lights on the controller board. There is a link in my video of how to decode them. They will tell you if the board or motor are bad.
@JosephWang-b7f
2 ай бұрын
Hi my treadmill suddenly stopped after there was a smell of burnt plastic, would this be the same issue?
@thehomerepairguy
2 ай бұрын
that sounds like a belt slipping. Best to take it apart and check.
@TheDouglash
3 ай бұрын
How did you get the cover off? The screws at the front are removed but I can’t get the cover off for fear of breaking the cover
@thehomerepairguy
3 ай бұрын
It has been awhile, but there might be screws on the side or clips to unpop. Be gentle but firm and it should lift off.
@ShaneSonyaJack
7 ай бұрын
When you said you looked up the error code, where did you do that? My red LED just does a continuous blink when I try to start the belt, but I can't seem to find anywhere that tells me the exact issue?
@thehomerepairguy
7 ай бұрын
I gave the link to the error code video in the description . Good luck.
@marksippola6633
Жыл бұрын
Thanks for this. Having a similar problem and this points me in the right direction!
@thehomerepairguy
Жыл бұрын
You're welcome!
@TheDouglash
3 ай бұрын
How did you get your cover off?
@jjpugplayer9312
4 ай бұрын
I have a 2022 serenelife treadmill I turn it on it shows the numbers and lights up i press start and the seconds start to count down but the treadmill dosent movie might be to tight or gotten loose or maybe one of the metal wires got loose when i open it up
@thehomerepairguy
4 ай бұрын
Check the blinking lights on the controller board. There is a link in my video of how to decode them. They will tell you if the board or motor are bad.
@jjpugplayer9312
4 ай бұрын
@@thehomerepairguy I just had to lubricate it it runs well now
@perlacuriel4923
7 ай бұрын
Great video! Is there a difference between controllers that have white or black switches?
@thehomerepairguy
7 ай бұрын
I didn't know there were different colors. The guy at the link I listed who sells them is really knowledgeable and helpful so you can ask him.
@santosdelarosa2320
8 ай бұрын
Can you send me which controller you got
@thehomerepairguy
8 ай бұрын
I put a link to it below the video. I called the guy and he was really helpful. Good luck
@latoya5403
3 ай бұрын
God bless you!!!! ❤ Thank you!
@thehomerepairguy
3 ай бұрын
You are so welcome. Happy to help
@ronniesbabygirl22
9 ай бұрын
Mine blew a fuse in my house now my belt won’t move do u think this is the problem
@thehomerepairguy
9 ай бұрын
Hard to say, but the on board diagnostics can help. Follow the video where it talks about the light that blinks on the main board and how to determine its meaning. Good luck.
@Tokaisho1
6 ай бұрын
Check the cable isn't damaged in any way, a fuse will blow because of a short
@jimjones4157
3 ай бұрын
You rock! Thanks
@thehomerepairguy
3 ай бұрын
glad to help
@MegaDanna1001
Жыл бұрын
Just had this issue arise as I was doing sprint intervals. I hear the treadmill start and then it comes to a complete stop. Do you still think it’s the control board in that case?
@thehomerepairguy
Жыл бұрын
You can tell by watching the error code LED on the controller board. It flashes codes when the unit malfunctions. It will tell you if the board is bad. It sounds like the same symptom as mine.
@Lorob854
Жыл бұрын
@@thehomerepairguydo I have to read the manual for those codes? Or did you find the code errors somewhere else ?
@Bekka241
Жыл бұрын
I thought mine broke when it was just the ifit program. They didn't connect movement to the video. Be sure to check that first. 👍
Пікірлер: 45