These videos will save everyone so much time and headaches when ordering/installing. Good stuff 👊🏼
@STREETFIGHTER50
Жыл бұрын
This is awesome of you guys!! I constantly see the same question “which header/K-member” over & over on all the forums and FB groups
@wolfthornhawkridge5705
Жыл бұрын
Let me ask the obvious, you guys have done so many Coyote swaps, why haven’t you and Dover developed a K-Member and header swap? At least if you did it everyone would know that it fits, unlike all of the other manufacturers that just hope their parts fit?
@jessefrias2575
Жыл бұрын
Plenty of options out there already just gotta pay to play.
@wolfthornhawkridge5705
Жыл бұрын
@@jessefrias2575 plenty of options that don’t fit. I think that’s why you don’t see these manufacturers doing install videos.
@Newmoneymarc
7 ай бұрын
What should a coyote swap cost as far as labor ? Assuming all the parts are already purchased
@gearheadfred5.059
Жыл бұрын
These headers work for a 1979-1993 Mustang, why wouldn't they work for a 1994-2004? I figured they would work with the newer cars because the 1996+ came with the 4.6, which is a much bigger motor (externally) than the windsor motors.
@countrysidecustoms2021
Жыл бұрын
Now will those headers fit a new edge with coyote swap if a guy uses UPR k member
@alexevans5043
Жыл бұрын
This is what people need answered. It should in theory but would be nice to hear some real world answers.
@kevt7883
Жыл бұрын
Did you try a BMR k-member with the coyote swap?
@mikes1292
Күн бұрын
Send that info to the heaser company , looks like they could hug the block at least another 1"1/2
@bigskyab
17 күн бұрын
if you turbo that thing would it solve the problem...or just create new ones.
@kevsro
12 күн бұрын
Isn't there something about those hedders not working on a Gen 3 motor.
@TheToo87
Жыл бұрын
I find it so interesting how these k members work. I have a UPR K member with Polly mounts and it fit perfectly on my coyote swap but I have no idea if it’s due to them being taller or the hooker blackheart headers I didn’t need any shims or anything to raise it up? It is an 03 but I don’t think it makes a huge difference?
@glenndiorio8967
Жыл бұрын
Apples and oranges. I have an 02 coyote swap with MM K member, poly mounts, no spacer and BBK long tubes. No issues at all.
@Lethal04Cobra
Жыл бұрын
Ultimate headers and UPR K member.
@alexevans5043
6 ай бұрын
Do they have an option for manual trans?
@romeoalphafoxtrot9517
Жыл бұрын
Great video! You guys just save anyone who watches this that is thinking about doing a Coyote swap a bunch of money and a bunch of headaches! Well done!
@snakebittengt
Жыл бұрын
These are the same headers I purchased for my swap. I have seen 1 guy (street car builds) run this setup before but I have yet to buy my Upr k member. Do you know of these speed engineering headers would fit with spring perches to retain factory springs and a arms? With the 6r80 I’m going to try to use the PBH shift lever flipped up to a 85 shift rod on a AOD shifter.
@curtismccombs2212
Ай бұрын
I was the #666 on the likes! 😈
@strux2745
Жыл бұрын
Curious if Team Z would work... they look pretty similar to the UPR
@jayvideos2868
Жыл бұрын
This. Also with ultimate headers for a 10r80e swap. Speed engineering are supposedly for 6r and 10r80 swaps.
@FAZAH_OFFICIAL
Жыл бұрын
Could this work with coyote new edge as well??
@tonyconti1257
10 ай бұрын
I’m trying to find that out also. I have an 01 with the upr k member and the last thing I need to get now is a set of headers. If I find out I’ll reply back on this comment.
@lancelewandowski2667
Жыл бұрын
Any idea what headers will fit on the QA1 K-Member? I haven’t been able to find anyone that have done the swap with the QA1.
@Azzholezgarage
9 ай бұрын
If running 6r80 or 1080r go Ultimate headers. 1399 That’s what instructions said when I bought my qa1 k member but for price probably cheaper to switch to upr😢
@Dmkpit401
6 ай бұрын
Yeah ultimate header for a fox body and BMI premium k-member was perfect for my new age when a 470 w
@paulhudgins5120
Жыл бұрын
Don't you just love when they say this part works with this part, and you find it's not even close, that's the frustrating part, you guys made it much more user friendly.
@cloudrehzii
3 ай бұрын
Sounds like me rn with rod and his “amazing kook headers” gotta spend $2200 then additional $1000 for parts to make it work 😂
@AJHanna1982
Жыл бұрын
Great video. Thanks man. But question. When selecting these headers what 02 sensor opinion should I go with. This is my first Coyote swap. I have an 11 f150 motor going into an 84 Cougar?
@erictimmons4995
Жыл бұрын
yo! great video! can we get an SN95 vs 96-04 spindle video?
@jessemas27
Жыл бұрын
Thanks for sharing. Let us know how well or poorly the steering shaft works. Having run both the UPR and AJE k members on swaps, I strongly prefer the AJE although I don't like the way that the rack bolts on for them. The engine placement is just much better. Great video guys.
@93_LXcpe
9 ай бұрын
Site now says for use with UPR k-member not MM
@frdstang931
11 ай бұрын
Thanks a ton for doing this video, saved me a bunch of time and money. I got a perfect fit!
@vmoya6631
Жыл бұрын
Anyone know the price differences in the k members? I get it the headers are alot cheaper. But was wondering on the total savings for the combo that work together
@twister8594
Жыл бұрын
Thanks for doing this video it was extremely helpful!
@dannyv3629
Жыл бұрын
I don’t think the steering column would fit with those headers
@samuelcervantes3595
Жыл бұрын
What's the average cost to do a coyote swap in a foxbody?
@BIGDMEDIA
Жыл бұрын
Good Informative Video!!
@jfisher99999
Жыл бұрын
Great stuff man! Appreciate you doing this
@jasonpeters9478
Жыл бұрын
Hey guys how come you does use AJE k-members??
@ogfoxbody9402
Жыл бұрын
Will those fit with a C4 transmission?
@nicholastapia6511
Жыл бұрын
Do a Godzilla swap on an OBS f150
@lwellsfoxbody6491
Жыл бұрын
🔥🔥 Awesome Info!! Thanks,
@vrm86gt
Жыл бұрын
good info! Thanks!
@mikeclark740
Жыл бұрын
Good knowledge brother
@5PointSlow
Жыл бұрын
No Team Z?
@clintonhayes670
Жыл бұрын
Thank you
@357bkg
4 ай бұрын
I’m doing my research to start my swap into an 88 & I wanted to tell u thank you for the time and experience that u hav put in ur videos for ppl like me. All at the amazing price of free! It means more to me than u know
@deadz0ne84
Жыл бұрын
What is the reason stock headers cannot be used in a coyote swap?
@midnight347
5 ай бұрын
The stock coyote headers? Because they don't fit these cars lol
@alexevans5043
Жыл бұрын
What about us manual guys who aren’t running an auto?
@alexevans5043
6 ай бұрын
Anyone able to chime in?
@midnight347
5 ай бұрын
The manual is smaller than the autos so it should fit easier with a manual.
Пікірлер: 54