On a positive note: With the 62mm throttle body, maybe you'll run out of gas *_BEFORE_* you pass the last gas station instead of after you pass the last gas station.
@MrSlappo
Жыл бұрын
Most Jeep owners know that stands for Just Empty Every Pocket lol
@scottbrown888
Жыл бұрын
this guy.
@61rampy65
Жыл бұрын
As an ASE certified mechanic, I can truthfully say that TomTom's description of how a throttle body works is _spot-on_ !
@TrevorDennis100
Жыл бұрын
Even his sound effects? 😉
@61rampy65
Жыл бұрын
@@TrevorDennis100 Especially his sound effects!
@KA-om9oz
Жыл бұрын
As a guy who changes his own oil...I agree with the professional lube tech
@murray8958
Жыл бұрын
Lol sound effects were a little off😂
@mikethompson2137
Жыл бұрын
I heard ASE stood for “ask someone else” Jk it’s an old mechanic joke.
@gregwright1444
Жыл бұрын
Ed with the brutal "That's welding?!".
@nasonguy
Жыл бұрын
Ed’s always ready with some shade, haha.
@udaypmishra1
Жыл бұрын
Sarcastic !i see
@volvo09
Жыл бұрын
That made me laugh!
@teressarenslow5992
Жыл бұрын
I love Ed! Can't beat honesty! Lol!
@jonscarboro123
Жыл бұрын
😂😂
@COM70
Жыл бұрын
6:07 Bahaha don’t think Ed can lie, he just says it in a slightly less blunt/more polite way.😂
@2403rygar
Жыл бұрын
Tom's description on how throttle bodies work was the best explanation I have ever seen or heard!
@josiatokirina1788
Жыл бұрын
In my youth, I stick welded the roof trusses for a very large airplane hanger. Not only did I weld each truss piece together, I also welded them up unto the roof structure. It was my first time welding and I was able to get proficient while welding the trusses on a horizontal bench. By the time I had to weld them in place up in the air from the under side, I was able to make smooth solid welds. I went through four long sleeve shirts and two pair of jeans from all the welding sparks. The only complaint the owner of the hanger had about my welding, was that I used too many welding sticks. He just wanted me to make small weld tacks. He changed his mind about how many long welds I made when a tornado hit the hanger 3 years later and the only damage was the metal screwed on roof sheeting that came off. All the trusses were intact. Thank You for sharing the newbies welding experience.
@gragor11
Жыл бұрын
I took flack for how heavy I built a little plans table shack that was installed on the roof of a grocery store we were wiring until the day the thing was hit by a bail of roof insulation from about 200 feet in a 40 mile an hour gust with us being about 15 feet away from the other edge of the roof. It bent but it didn't sheer off and take us with it. Some people are asses.
@justinc616
Жыл бұрын
Ed : "that's welding?" lol Been missing Ed in the vids, really great to see him popping back in again.
@lennygermany1507
Жыл бұрын
Isn,t it great when a full blown Engineer with all his abilities describes how a throttle works , RRRRRRRRRRRRRrrrrrrrrrrrrrrRRRRRRRRRRRRRRRRRRRRrrrrrrrrrrrrrrrrrrrrrrrr Love it
@lockedin60
Жыл бұрын
It is good that everyone in the shop gets experience in doing a wide variety of jobs. It makes the whole crew multi-dimensional. It should take some pressure off of Matt and Lizzy and Tom. You guys always seem to make things interesting. Which will continue to delight the fans.
@randymack2222
Жыл бұрын
67 is my favorite year for GM trucks!!! Last year for the small rear window...
@trif55
Жыл бұрын
"that's welding" - damn, Ed, you're a legend!
@carlholland3819
Жыл бұрын
ya i hate people that are 1 dimensional. stupid dots
@michaelwpaulin4876
Жыл бұрын
The “Vibe” in the Banana with Matt , Tom and Jayme made me feel the respect and friendship that you all have for each other... almost like a Sibling thing. Matt, and Jayme you have created a great Family, Community Oriented business that I truly enjoy watching. I met you all at Jeep Invasion in Pigeon Forge ( I was amazed at the line of fans at your booth) and look foreword to doing it again this year.) God Bless you all, be safe in the shop and out and about in your work.. MWP Cosby, Tn. You
@janinecarson8380
Жыл бұрын
Tom's throttle sound effects are golden. 😄
@lanesworld4000
Жыл бұрын
Peanut riding on the forklift is hilarious. I guess she's hoping they're going on a rescue 😂
@BrokeWrench
Жыл бұрын
She just loves being on things. Seeing her jump on that chair got a good laugh out of me
@blakewilliams3702
Жыл бұрын
Jamie sure did a good job of hiding her enthusiasm about the new parade truck…..
@b52goats
Жыл бұрын
Lol you know Matts gotta have 10 other "parade trucks" sitting in his lot 😂 That poor woman probably just wants to go on vacation and spend some 1 on 1 time with Matt
@TrevorDennis100
Жыл бұрын
Renovating a beautiful old truck like that could generate a lot views and new subscribers. Speaking of which, is Rory ever going to make a start on Robby's wrecker build?
@philduoos2961
Жыл бұрын
@@b52goats "What do you mean you want to go on a vacation? We just had one! Picking up that Corvair and driving it home! Just the two of us!!"
@rickclark4112
Жыл бұрын
I noticed the SAME thing..... It's just like me and my wife looking at " cool old junk"😅 Priceless!!!
@thedumbassspeaks
Жыл бұрын
Chalupa Batman-I don’t remember if Matt has any daughters, but she could take a cue from Michele Cox and do the “Girl’s Vacation” option. Leave Matt sweating and grimy from doing off-road recoverys while she hangs out at the beach.
@PanheadJeff58
Жыл бұрын
Tom, as a former mechanic school instructor I believe that was the best explanation of how a throttle body operates ever! Those "carburetors with wires" fuel systems confuse a lot of folks.
@chubbrock659
Жыл бұрын
Toms explanation of how throttle bodies works couldn’t have made more sense! Perfect!
@enderdragoon
Жыл бұрын
Grandfather passed away a few months ago, he had a lot of stories about working in the Studebaker plant. He use to do the final adjustments on the factory line for the door jams so they would open/close/latch nicely. His entire toolkit for the job was a block of wood and a hammer.
@b52goats
Жыл бұрын
Thats cool lol those guys had more skill and craftsmanship in a pinky than most men do now days. Sorry for your loss brother his memories and stories live through you, make sure you pass them down!
@Crewsy
Жыл бұрын
So door adjustment on the factory line hasn’t changed much. Now they just use neoprene hammers and arm strength to tweak everything into alignment. New people send a lot of vehicles to final repair before they get good at it.
@Ddabig40mac
Жыл бұрын
Awesome to see the repair/upgrade projects getting handled. The trailer winch really looks the business now. Plus the skills building for the "C" crew is good. Those guys have such great attitudes about not being good at stuff but getting in there, having a laugh, and learning.
@ken85225
Жыл бұрын
Tom has the amazing ability to explain how a throttle body works in terms that a layman can understand :)
@superchiefusn5601
Жыл бұрын
It's all in the sound effects 😁 Expertly done!
@bigmarc977
Жыл бұрын
more airflow...done
@willpenny1688
Жыл бұрын
Time for a new Ed T-shirt. "That's Welding?" Great to see Ed up and around.
@joeradican2023
Жыл бұрын
agree
@darekmistrz4364
Жыл бұрын
Love it!
@dwcheshire
Жыл бұрын
I can't wait to see what y'all build with those huge axles! The WLOW build was awesome and it has lived up to expectation.
@UncleManuel
Жыл бұрын
Jefe: "That's not even good for a farmer's weld!" Ed: "That's welding?" Pffffffhahahaha, you guys are brutal! 😂😂😁😁
@Shilohii65
Жыл бұрын
All Tom’s revving noise got my cat to perk up and pay attention. Must have been pretty genuine engine sounds. As for noise and interference with video taping…..nothing too significantly bad. Sounds good. Hope it works out on the trail.
@illby1971
Жыл бұрын
My Mom has a 1949 2R5 Studebaker flat bed like that in her garage that was her Dads when he passed away... It has been parked there since 1977!! One of these days I hope to get it out and running. It was an old local ice delivery truck and still has the name on the doors and cab.... I'd love to see you do something with that one!!
@randycook7226
Жыл бұрын
it's great seeing Ed out and about...and it's great always improving the fleet and your trailer's.... and having the crew giving each other encouragement to each other...and the 🐕 dog's love the attention given 😀 😊...keep making great videos 📹 👍 😀 and always thinking about your community and willingness to help other's...thanks 😀
@georgevindo
Жыл бұрын
Now if they would only get on the Bombi while they have good weather and hopefully time for it.
@onepunch7632
Жыл бұрын
Gm MORR! Colby and Jake are great additions to the team. Glad to have em on board.
@timothylumbrix5881
Жыл бұрын
Do you mean good MORR-ning?
@onepunch7632
Жыл бұрын
@@timothylumbrix5881 Damn! Why didn't I think of that?! 🤦♂️😂
@ellwoodwolf
Жыл бұрын
I imagine working for Matt can be long, strange hours, but he seems nice and honestly very few places will train or help employees get better anymore, so that’s sweet to guide these guys to do a little more ( even if it is a punishment lol )
@martylawson1638
Жыл бұрын
A healthy dose of "you broke it so you fix it" also encourages more respect for the equipment.
@DustinRea
Жыл бұрын
If I worked for Matt, I think I would just steal Eds old trailer and not even worry about what time it is and just sleep whenever there's a lull in activity 😂
@mdupuy
Жыл бұрын
Matt's smile at 17:17 into the video is priceless; like a kid walking into a toy store. Love it. We also love how gentle he is with the trauma dog. Great video. ❤
@madcratebuilder
Жыл бұрын
A larger TB normally effects bottom end and mid range more than top end. Depending on how smart the ECM is it can take several drive cycles for the ECM to optimize the new MAF/TPS numbers.
@BenK12345
Жыл бұрын
we replaced Matt's regular throttle body with Folger's crystals. Let's see if he notices!
@jcnme
Жыл бұрын
Love Tom's Impersonation of the Throttle Body ❤😂 Ed stated "That's Welding" 👍🤣😂🤣😂🤣
@StereoSpace
Жыл бұрын
I had a hot metals class in high school (I think I was a sophomore). I choose oxyacetylene welding and the forge. The welds were judged on the consistency of overlap of the beads - meaning consistency of strength across the piece - and then the welded piece was put in a vice and hammered over 90 degrees. If there were no fractures, that was an A.
@ReadTheShrill
Жыл бұрын
18:38 Love the railroad tie they put in. I don't think I've ever seen a vehicle that incorporated wood as part of the frame before.
@kevbev1524
Жыл бұрын
Sometimes you can turn the trailer on its side for repairs and easy access, Mattman likes to keep everyone working hard.😊
@cherokeejeeper4373
Жыл бұрын
I have a Cherokee with a 4.7 Stroker. And a 68mm throttle body from painless wiring. And you do have to open up the hole in the intake manifold. Also have a custom built head on it with 2" intake and 1.6" exhaust valves and ported and polished head and matching intake ports. And to get her to breathe, a custom header with 1.58" primary tubes and 3" collector. She is wicked!
@who2u333
Жыл бұрын
That looks like a lot of condos going up around the shop. It's amazing how many people are moving to different places around the country.
@riverpirate1022
Жыл бұрын
Yea that's not good, condo dwellers do not like the noise from industrial shop garages and people road testing mods. Yall already have major water shortages out west, you need to protest your local governments until they stop permitting more developments when you don't have enough water for what you already have. It's bad enough idiots terraformed the desert and commifornia decades ago so people could live and farm there. And you wonder now why you don't have enough water, it's a DESERT idiots! Nature will reclaim what you tried to steal from her, what once was desert will be again, it's only a matter of time...... Millions of people are going to be displaced from the west and commiefornia in the coming decades due to no more water from WAY over use and abuse from housing and farming that should not exist there. A reckoning is coming for those folks. Twas a foolish man who built his house upon the sand......
@ajwilson605
Жыл бұрын
A lot of people back in the day put Cadillac 389 OHV V-8's into Studebaker trucks of that vintage. My first boss back in '67 had one in his '51Studebaker pickup...with a same vintage Hydra-Matic. That truck screamed! A real blast to drive for a 16 year old!'
@brw3079
Жыл бұрын
Matt's full throttle grin says it all😂!
@brevin4706
Жыл бұрын
An engineer explaining how a throttle body works " vrrooom - vroOOOoOOMMM" sums up all you need to know though 😂
@2CabrasLocas
Жыл бұрын
The Edge throttle body on my 4.0 make the same sucking sound I heard the banana making when it was cold. It came with a programmer that all 3 sensors plug into & makes the throttle too jumpy for smooth off roading.
@oldbearsden9819
Жыл бұрын
Matt is smiling when he punched it. That tells a lot.
@webfreakz
Жыл бұрын
A new cab for those giant axles that just came in? Can't wait for Wrecker-v2!
@williamarmstrong9970
Жыл бұрын
with the bigger throttle body i hope you DON'T run out of gas!!!
@graham-martin5847
Жыл бұрын
you should have a anderson connector on the back of the tow vehicle to hook up to the winch much better idea so you can have the truck running winch runs better and faster as you have to make sure battery is charged up on the trailer all the time !
@ajwilson605
Жыл бұрын
Put a 50 watt solar panel over the battery. The trailer isn't used daily and the solar panel would keep the battery hot when it sits in the yard between jobs.
@riverpirate1022
Жыл бұрын
I said this to another reply. We are just gonna see them using the jump box on the dead battery all the time now, if they can't remember to get gas, they sure as hell won't remember to keep the trailer battery charged lol. Hard wired to the tow vehicle with a plug like an Anderson is the only way to go for a trailer winch.
@mytwocoins
Жыл бұрын
A friend of mine had a 1952 Studebaker Starlight coup and it had a 232ci V-8. I don't know what year that truck was but it may have been the original engine especially with the beefy frame under it. Can't wait to see what you picked up.
@MattJMillsNZ
Жыл бұрын
gotta love this interaction between Jefe, Jake, Coby and Tomtom
@revtoyota
Жыл бұрын
Now that you did the throttle body the Banana really should be put onto a dyno and actually tuned.
@marvincarter870
Жыл бұрын
Ok it's good to see Jake and Colby stepping up and learning to weld. Matt needs these guys. Tom put a bigger throttle body on the Banana that should help and they repaired the trailer. Looks like Matt has a new project coming up.
@duramaxdad
Жыл бұрын
New project is a 67 to 72 Chevy cab. Is it a wrecker? A truck? Rollback?
@MatthewBerginGarage
Жыл бұрын
Don't forget to install a dual battery isolator and add the power wire to the trailer plug so the tow vehicle charging system can keep the trailer winch battery charged.
@georgehampton7579
Жыл бұрын
Love Tom-Toms demonstration of the function of a throttle body!🤣✌️ Gave me Tonka in the sandbox flashbacks.
@mattsconberg8225
Жыл бұрын
17:17 - The Smiles between Matt & TomTom - I love you guys and you guys LOVE EACHOTHER!
@stephaniewilley2224
Жыл бұрын
Perfect sound effects demonstrating how the throttle body works
@shybishop5059
Жыл бұрын
My Grandpa drove a 1951 Studebaker 1/2 ton pickup. My Grandma drove a 1953 Williys coupe. Unique vehicles even back in the 1950s and 60s. The starter on Grandpa's pickup was a floor mounted switch under the clutch pedal. You had to press down on the clutch to activate the starter. An early safety feature. While the dash instrument panel had the face in the passenger compartment, the instruments and wiring were in a box on the engine side of the firewall. No laying on the floorboard and reaching up into a cramped black hole while making repairs. During WWII America shipped Studebaker trucks to Russia under the Lend Lease program. Studebaker built horse drawn wagons long before the automobiles were being built.
@jarletronerud
Жыл бұрын
Jake and Colby are brilliant! So positive and entertaining. MORR of this 😊
@tommccoy8017
Жыл бұрын
That steering wheel alignment would drive me nuts 🤪
@zfpv7211
Жыл бұрын
Changes like that require a retune to actually get any notable difference. The computer will take a long time to “learn” the new fueling map and will probably just max out the long term fuel trims. So it’ll never actually be right if it can’t add enough fuel to make up for the extra air.
@fishingjts
Жыл бұрын
Actually… if you don’t change the size of the tube hold the MAF sensor or whatever type of air flow sensor they are using you shouldn’t need to retune. The amount of air should still be correctly be accounted for. Changing the size of the throttle body shouldn’t throw off the calculations… but yeah still a good idea to watch fuel trims
@marlaclarambeau327
Жыл бұрын
Nice job learning to weld. It was fun watching when Lizzie learned. She can lay down some nice welds. Regarding projects: Could it be time to work on the Tangerine and give it some love?! Jaymie does a lot. Keep up the great videos.
@DarkHawk666
Жыл бұрын
Thats what i have waiting for, and lizzys ride too.
@11Bbq
Жыл бұрын
This is the most supportive work environment I’ve ever seen.
@FYMASMD
Жыл бұрын
Come to the hospital I work at and checkout the orthopedic surgical team I work with. We use a lot of tools you would find familiar. Except we don’t weld.😁
@DeafRVTraveler
Жыл бұрын
It’s awesome how Matt loves to bring old cars back to life especially the idea to use the classic truck with flatbed for parade. Just brillant.
@merylpelosi8485
Жыл бұрын
A nuclear certified welder once told me the only difference between a good weld and a great weld is a grinder and a coat of paint.
@edzimdahl1158
Жыл бұрын
Wasn't from a certified nuclear welder, just another certified welder like myself, but have heard that numerous times over the years
@briankipper5496
Жыл бұрын
I've heard that expressed as "A grinder and paint make me the welder I ain't"
@gustavoguerrero440
Жыл бұрын
it is good to see another people involved in welding and shop jobs, good job Matt.
@overthehedgerow
Жыл бұрын
“Dirt road into a hiking trail”😂😂😂
@tylercousins7779
Жыл бұрын
Take that old Stdabaker truck and make a wicked off road rollback so you don’t need to take a trailer.
@Jumpersplace
Жыл бұрын
I could watch Matt loving dogs for hours on end...
@scotterdog1036
Жыл бұрын
Get a dog and love it.
@garlandremingtoniii1338
Жыл бұрын
Tom can explain things to folks, as if his captive audience is around 10 years old. He’s the best I’ve seen at it.
@DRFelGood
Жыл бұрын
The Banana does sound more “Snapper” Also, Tom Tom crushed mechanical operations demo. Thank you Matt 💛 & A Team.
@bjolley8686
Жыл бұрын
Matt is so awesome to let his employees learn on working equipment. Reminds us of Lizzy in her early welding days
@ADBBuild
Жыл бұрын
Ah yes, vertical overhead welding. Took me a few tries to pass that test in school.
@CLCIII
Жыл бұрын
That off center steering wheel would make me crazy.
@bullittdog4352
Жыл бұрын
Great video..this group of guys is a blast in the shop..and Ed getting his spunk back is awesome! I thought Matt had a new girlfriend till I heard her talk and realized it was Jamie..that new hairstyle looked great..or maybe it’s just humid out in Utah and them curls are showing up! Are we gonna have a classic truck mixed with giant military axles?
@philh8829
Жыл бұрын
3:19 Look at the tachometer jumping around. That’s one hell of a misfire/timing issue or they’re in an earthquake.
@MattsOffRoadRecovery
Жыл бұрын
Just a dirty signal. Somebody said that a 100 ohm resistor would fix it
@richardhill4862
Жыл бұрын
Tom Tom is getting better on camera, but has a hard time with keeping the surprise. Nice video!
@deannalemburg10
Жыл бұрын
Peanuts jumping on chair spinning around trying to be friends with new pup in town was totally screen worthy
@TheEdge92
Жыл бұрын
Nice! Seeing the Studebaker I just thought that I'm in for more MORR classic restos.
@wizardind3203
Жыл бұрын
if you raise the trailer up you dont have your whole body exposed to drippings .i was told the fastest way to learn overhead welding is bare footed. LOL
@rhondasweeney7271
Жыл бұрын
Love seeing Ed on video again, even for a short time. This was a wonderful video . Thank you for sharing!
@toddhopwood9732
Жыл бұрын
You boys better hope that Lizzie doesn't inspect the structural integrity of that ramp
@ynotynot8040
Жыл бұрын
Its beyond obvious that a message is being sent to Lizzy with all the bad welding going on !!! Everyone misses her , goes without saying anything
@JT-SE-OHIO
Жыл бұрын
That last truck that Matt was driving was a Chevy or GMC somewhere between a 60 and a 66, by seeing some of the interior, but not sure what size. Probably one ton based on the mirrors. Just testing my memory of what I remember. The Banana has a good running 6 in it with enough power to get the job done. The trailer looks great and a 12,000 pound winch should be able to load about anything that will fit on the bed which by the way always seems just about a foot too short for the 4 seater side by side.
@plantertrey
Жыл бұрын
Jake and Colby are naturals on camera. Such charisma. SO glad to see the banana getting upgrades!
@MrStaybrown
Жыл бұрын
Ed said, "That's welding?" 🤣
@chancewise6060
Жыл бұрын
That's crazy you guys only welded a cpl day congrats keep it up and good to see you guys on the channel more 👍
@TSKseattle
Жыл бұрын
The concern with newbie welders is penetration. New welders tend to just lay melted wire in to a bead, but if you hacksaw thru the joint the bare metal is virgin. If they get penetration OK the appearance is moot.
@ztwntyn8
Жыл бұрын
I didn’t expect a noticeable difference from the new tb but I didn’t realize or forgot it had a 4.7 stroker so I can see using a larger tb now.
@riverpirate1022
Жыл бұрын
Speaking of that, Matt said the banana is faster than the Morrvair....I don't see how that's possible? Doesn't the Morrvair have a bigger corvette-built motor with a supercharger? The jeep just has a pos tiny jeep v8. Sorry I'm biased, Jeeps suck lol. Toyota all day every day if you want real quality and reliability.
@brw3079
Жыл бұрын
The pacing of your videography is flawless
@j.e.honiball1327
Жыл бұрын
Here we go Sunday
@diffusesden5455
Жыл бұрын
LOL "what do you think of this Jaymie?" 17:57 ....... wait for it.... 18:07 she's totally interested hahahaha
@mikekuczynski1552
Жыл бұрын
Some really good editing and video work particularly the welding . Thanks for sharing
@justinc616
Жыл бұрын
If the Banana could speak: "MORE POWER BABY" Fitting after the Donut colab :D
@offgridrecon
Жыл бұрын
It’s cool Jake is getting more screen time. Keep it up bud! 👍🏻
@LittleMikeStarCraft
Жыл бұрын
There is just something about working on those 4.0Ls.. They are timeless, and sound amazing. I have this same throttle body, I also put a riser on in, paired with an aftermarket header and cat-delete. Helped a little. I need a post 98' intake manifold like you guys have.
@NigelMarston
Жыл бұрын
Really fun episode chaps. Enjoyed that a lot.
@borg5424
Жыл бұрын
The next annual off-road wrecker games needs an "engine noise imitation" contest stage... TomTom may give Matt a run for his money!
@oswynfaux
Жыл бұрын
Looks like it's new project season, wonder if the snowcat will get any love this year.
@Fishguy13
Жыл бұрын
Jack up that old truck on those monster axles and have a flat bed to winch up on and avoid trailer damage. I know it wouldn’t beable to go on every trail but the ones it can would be sweet! Also a cool parade truck at the same time!
@richardthomas1743
Жыл бұрын
Good MORRning everybody and thumbs UP to Matt and crew! 👍👊🏁🏁
@JanelleVocate-Ames
Жыл бұрын
Get back down there!!!! You are in my spot!
@richardthomas1743
Жыл бұрын
@@JanelleVocate-Ames LOL I see that! I got your lucky 7 spot today! 😁
@glennsrailroading
Жыл бұрын
Love those old Studebaker’s. Go for it. Another interesting video. Thank you 55-57 Tri Five’s are my favorite, especially a 5700 LCF but with a dual cab is my dream truck.
@floydstowe
Жыл бұрын
Already miss seeing Lizzy she's a excellent welder not sure about the new people miss the old team
@freeidaho-videos
Жыл бұрын
FYI, batteries on trailers are always dead. Bring jump boxes. Most of the people that swapped throttle bodies had a hard time noticing anything. The dyno shows a tiny tiny difference.
@mr.orange9134
Жыл бұрын
please as a long time viewer.. PLEASE dont let tweedldee and tweedldum do the "youtube show" again. everything else is excellent as always.
@43Waylon
Жыл бұрын
Can’t wait to see what the ‘67-‘72 you are driving at the end is!
Пікірлер: 1,1 М.