I hope it gets an ESPHome integration through the M5 or other Bluetooth device.
@farmaforpresident8138
2 жыл бұрын
Interesting device, but would like to know the exact protocol it's using
@thisfeatureisbad
2 жыл бұрын
I think it's Bluetooth as it's low power for double button cell batteries. That's why it's a sub device as the M5 acts as a server.
@farmaforpresident8138
2 жыл бұрын
@@thisfeatureisbad that would be great news for tinkerers since we could use an esp32 as a gateway!
@AladinTechnology
5 ай бұрын
hello, does it have light indicator, can light work always so I know if scene is active or not. I need it for alarm / motion sensor, door sensor and siren. Do you have something to recommend for best solution for alarm. Thanks
@csongorvarga
5 ай бұрын
No, nothing at all. This is battery operation, so no lights or anything like that. Also, scenes typically execute and complete, it has not state. What I can recommend that if you execute a scene that let's triggers on motion, within the scene you also turn on a Sonoff device which has a small light connected to it. And turn it off in another scene. There is no better option for it in my opinion.
@Jkaravokiros
3 ай бұрын
Hello, thank you for the video. Can the R5 communicate with the RFR2 and RFR3 (433 mhz) also or does it only communicate with zigbee receviers and gateways? I want to install 10 individual light bulbs and control them individually (on/off) wirelessly (no wires from the switch to the lights). I have line power from the breaker panel available for the lights and the switch. I do not have internet/wifi in my shop (steel building). Thank you!
@csongorvarga
3 ай бұрын
I suspect that the R5 uses 433Mhz, but actually I am not sure, it is not mentioned anywhere. And also it is mentioned that it works specifically with NSPanel Pro, M5, but not the RF Bridge. So I suggest using it with these products.
@anoopchandar3541
Жыл бұрын
hey, once this is connected through M5 gateway, does this support scenes for all the devices, on the eWe Link App, even for all the old Retro 1st gen sonoff smart switches?
@piotr7601-c3n
Жыл бұрын
@csongorvarga Hi, how about the battery life? I bought R5 and it last like 5 days on original batteries. I've changed to new batteries and again, after few days, with small usage, like 50 clicks in the log, the battery is gone. Is it expected? Or my R5 is not working properly?
@csongorvarga
Жыл бұрын
Yes, this is not normal. The battery should last a year under normal use.
@ganbaatarchultemsuren2616
9 ай бұрын
I've Sonoff 4ch device. Do I need M5 necessarily pair with R5?
@csongorvarga
9 ай бұрын
There are only certain devices that R5 connect to. 4CH is not one of them. You need an M5 or other compatible device.
@slavob1751
2 жыл бұрын
Which sonoff bridge I must use with Switman R5 ?
@csongorvarga
2 жыл бұрын
M5 or MINIR3
@80sityuka80
8 ай бұрын
Szia. Ha jól értem egy átjáró is kell hozzá?
@csongorvarga
8 ай бұрын
Igen, de itt az átjáró egy másik Sonoff eszköz. Mint pl. a NSPanel Pro, M5 illetve olyan 4-5 egyéb típus egyike.
@km5902
Жыл бұрын
Dear sir sonoff R5 just arrived today and i tried to add water th dual R3 . But R5 is not adding. Can you please guide?
@csongorvarga
Жыл бұрын
I never used this before, but you go into the menu of the Dual R3 and select sub-devices (or something similar), and you can add it there.
@km5902
Жыл бұрын
@@csongorvarga thanx for reply. I did same as you advised. But R5 was not adding. I think dual R3 gives option of adding sub device but R3 dual is not compatible with R5.
@km5902
Жыл бұрын
Hi. Good video. Can we use ns panel pro as a bridge?
@csongorvarga
Жыл бұрын
Yes it can be.
@km5902
Жыл бұрын
@@csongorvarga oh thank you for reply sir.
@srinivasdeverakonda404
Жыл бұрын
Hey. Does this work with Sonoff Zigbee Bridge Pro?
@csongorvarga
Жыл бұрын
No, this is not zigbee. This can be paired with the similar looking M5 Wifi switch.
@srinivasdeverakonda404
Жыл бұрын
@@csongorvarga Thanks for the info.
@HaraldWestlie
Жыл бұрын
@@csongorvarga or the MiniR3
@yasirali27
2 жыл бұрын
Can we turn on all four channels all together with one button
@chrisjheath1768
2 жыл бұрын
Yes, just create a scene and select which channels you’d like to turn off.
@yasirali27
2 жыл бұрын
@@chrisjheath1768 how does it work. With wifi or rf
Пікірлер: 30