I have over 14 Sonoff basic with ewelink installed at home. I'm just starting with homeassistant. After 10 hours of trying and following yours and others videos I have all my sonoffs in homeassistant as well as ewelink! - HAPPY!!! - THANK YOU!
@mortenmoulder
4 жыл бұрын
I just went to set this up following this guide from start till finish, and it works flawlessly. In about an hour I managed to set up home assistant in Docker (something I've been postponing for a while), installed HACS, installed AlexxIT's repository, installed the integration, and paired with my brand new Sonoff Basic, that I just unpacked. IN AN HOUR! Extremely simple thing to set up. Thanks for yet another great video :)
@DrZzs
4 жыл бұрын
Excellent!
@killerskincanoe
4 жыл бұрын
Im wishing my setup was as smooth sounding as yours. I've made as far as having the VM installed in ProxMox. HACS, and AlexxIT repo installed. Integration installed. Edited my config file to include ewelink creds. however my sonoffs, (visible in the app) are not showing up after a reboot of HASS :(
@killerskincanoe
4 жыл бұрын
I'm seeing this error, but not sure what it means at this moment Validation for DSorlov/hasl-platform failed with GitHub returned 404 for api.github.com/repos/DSorlov/hasl-platform/git/trees/master.
@antonisantoniou2560
4 жыл бұрын
@@killerskincanoe Did you delete the .sonoff.json file (there is a dot (.) before sonoff) before you restarted Home Assistant?
@AbhishekKumar-ez5uv
4 жыл бұрын
@@antonisantoniou2560 In my particular case, the .sonoff.json file has been generated with devices listed in there but somehow those devices do not appear on the Home Assistant interface :( any ideas?
@MidwayMaiTais
4 жыл бұрын
I tried for hours to flash my R3 DIY to Tasmota with no luck and just lived with the R3 not included in Home Assistant. I came across this video today and this just worked. Thank you so much.
@tommh44
4 жыл бұрын
Wish I could give you two thumbs up. You gave me a BONUS with this video. I have a Xiaomi BLE sensor which I have been trying to figure out how to use. I noticed an integration for that while you were installing sonoff. Installed it too. AND it works!!!!!! Thanks for all you do for us.
@DrZzs
4 жыл бұрын
Excellent! Thanks Tom!
@jordancobb509
4 жыл бұрын
Just starting out in Home Assistant. Your videos have already become an invaluable resource.
@johnestan
4 жыл бұрын
this Sonoff and Shelly competition is amazing.
@LeonidMutti
4 жыл бұрын
Does anybody knows if there is something like this for shelly devices?
@johnestan
4 жыл бұрын
@@LeonidMutti There is. Shellys do not need custom firmware for basic local control.
@MichaelBennett1
4 жыл бұрын
5:15 you might want to drop in a note there that says the configurator has been renamed to File Editor.
@Jaso2779
3 жыл бұрын
omg thanks ive been watching his videos wondering where to find it
@constantringingtech2230
4 жыл бұрын
WOW. you and Alex deserve so much credit. Alex for the work on the integration and you for bringing it to the public! I needed this so bad as I have the newer touch light switches that I didn't want to flash.
@DrZzs
4 жыл бұрын
awesome! I figured this would remove the last barrier for a lot of people. Good luck!
@constantringingtech2230
4 жыл бұрын
@@DrZzs :) Thank you again for your videos. You've inspired me to do my own crown molding lighting :)
@Sym0nd0
4 жыл бұрын
This is awesome, I've just got my RF Bridge and had read horror stories about flashing them. Came to watch your vid on doing that and discover I don't need to anymore. 🕺🏼 Thanks Drzzz and Alex!
@Pinkywafer
4 жыл бұрын
Great video as always doc! Thanks for including my video!
@alexandrostzakis9789
4 жыл бұрын
Hello! I want to start by saying thank you for all that information you share with us through your videos. I really appreciate it! Keep up the good work!
@AlexxIT
4 жыл бұрын
4 switches with Sonoff Micro because it's flashed with multichannel firmware. I don't know why. Earlier you can fix this with device_class: [switch] setting. But in latest version this should work automatically (if device list loaded from eWeLink servers). PS: and thanks! Great video!
@DrZzs
4 жыл бұрын
Hey Alex! I saw you updated the code today. Great work sir!
@Tracherot
4 жыл бұрын
Thanks to both of you dudes
@sewashburn0529
3 жыл бұрын
Thanks again DrZZs! I switched over to this integration after the other one ceased working after a HA upgrade.
@cecastil
4 жыл бұрын
Great tutorial as always! I just tried it with the Sonoff S31 plugs and the custom component also provides voltage, current and power consumption reading... perfect for washer & dryer status automation.
@YvanLeTerrible31
3 жыл бұрын
Wahhhh - thanks for explaining the drill, That was the main thing that was sacry, having to flash those sonof mini and the sonoff outlet, and Now they work with HA, Flawless ! Huge Kudos to Mr AlexxIT - being able to pull that is game changer
@ddacombe4752
3 жыл бұрын
Many thanks for this. I just got my first sonoff device with v3 firmware, followed this video and setup was a snap. The installation has changed a little and become even easier.
@bdubs6666
Жыл бұрын
This was awesome and very simple, thank you very much. I already had HACS installed so installing AlexxIT Sonoff custom component was easy. I bought 3 of these SR26 Sonoff smart switches a few months ago with the intentions of flashing the firmware to ESPHOME. But it involved soldering wires to very small and cheaply built PC boards. So naturally, I screwed up the first one. But that to DrZzs, I salvaged the other 2 smart switches and am controlling my Christmas light with them.
@jasebates7589
3 жыл бұрын
thanks - I got this to work although the GUI is a little different now compared to the video. don't know how the heck I got it to work seemed to take a whole heap of keep trying but without this video, as a guide, I would never have done this in a million years! so thank you so much for your help :)
@ajarvis92
3 жыл бұрын
You are a legend! I was on the brink of returning my zigbee hub and you just saved it! Thanks for your awesome content!
@denesk2794
3 жыл бұрын
Oh man, thank you ! I am no stranger to FTDI cables and flashing and uploading 3rd party firmwares, but I remember my horrid experience trying to flash my Sonoffs .... with 5 different PCB versions and all that good fun (then a broken FTDI adapter.)... This one was a 2 birds with one stone experience. Now I have HACS that I was lazy to add and 2 new 4channel Pros I really didn't want to flash.... plus I upgraded my HA that I was avoiding for some time. Works perfect !!!!
@denesk2794
3 жыл бұрын
You should make a "Best of HACS" episode, going through the best ones you use from there. There are so many it is a bit hard to see which ones are cool and which ones are broken/bad. :)
@somecallitfun
4 жыл бұрын
Your instructions were great. Got it working in about an hour. Thanks so much.
@hoctrimededebutry8655
4 жыл бұрын
Hello from France !! Always a pleasure to watch your channel :-) I learn a lot of things everytime.
@DrZzs
4 жыл бұрын
hello France! thanks!
@Weeem
2 жыл бұрын
If like me (new to Home Assistant) and you do this ... and wonder where the heck they are so you can set up actions.... They're not Devices. They're "entities". So for automating something, this is an example: Configurations | Automations & Scenes Create Automation (button on bottom right) Name: Name: Kitchen Tablet charge ON Description: Recharge kitchen tablet when the battery is low enough. Mode: Single Triggers: Trigger Type: State Entity: Kitchen Tablet From: 0 To: 15 Actions (this was where I got stuck looking for devices): Action Type: Call Service Service: Switch_Turn_on Targets: Name of your Sonoff Smart USB (or socket)
@Meelobee
4 жыл бұрын
Great to see more local control :)
@ALaModePi
3 жыл бұрын
Thanks for calling this to my attention. I'm not opposed to flashing firmware, but I do like not having to do it. This made my latest home automation upgrade easier and quicker. Specifically, I've got a number of lights in my living room that I just converted to smart using Sonoff BasicR2s. One thing I do with this is use the ambient lighting (wall-mounted, floor and desk lamps) for when I'm on Zoom and switch to the main ceiling lighting when I'm not. (The ceiling light casts a halo effect around my head which is misleading and confusing. :) )
@ronensegal1177
4 жыл бұрын
I have been looking for something like this for a very long time... Thank you very much! I can just say that for me, adding the country code had to be done in addition to the leading 0 of the phone number (unlike how you would actually dial the number). Great add-on and tutorials!
@santorcuato
4 жыл бұрын
Thanks for the info DrZzs! Working 100% in a few minutes a Basic RFR3. Gracias, Adios!
@balciunas2
3 жыл бұрын
Amazing!! Thans! I accidentally bought Sonoff WIFI instead of Zigbee. Thought I will need to sell it, but I can make it work with your help!
@sking379
3 жыл бұрын
You rock, I got it up and running, home automation, here I come, thanks buddy
@christiandavies7650
4 жыл бұрын
Seemed to work with another non-sonoff device I had in my ewelink account too. Exciting stuff.
@DrZzs
4 жыл бұрын
excellent!
@andygrichting
4 жыл бұрын
that's amazing... I was dreading for so long to re-flash these devices... that was sooo much easier. thanks a lot man
@TelmoGuerreiro
2 жыл бұрын
Nice video. If I can give my 2 cents: Anyone installing S31 plugs (more than one) I recommend to delete the Sonoff.json file. In my experience leaving the configuration as " reload: always" breaks the communication with all your previous S31(s) when you add a new plug. The only way that I can have multiple plugs connected (I have 3 currently) is by deleting the json file and restart HA. When I say "breaks the communication" I don't mean it literally, HA can still toggle the plug on/off but the current and power readings are inconsistent.
@rockandroad4x4partsaccesso36
4 жыл бұрын
That's great news, tomorrow I will try to integrate this in Home Assistant. Thanks so much for great videos. You're awesome Dr. Z
@sccsuk
4 жыл бұрын
Does this work with the sonoff camera? Would be great if it does! Rtsp is great but pan/tilt locally would be awesome.
@Shafy7
4 жыл бұрын
It's not working with sonoff camera.
@AlexxIT
4 жыл бұрын
Latest master (beta) version supports camera
@sccsuk
4 жыл бұрын
@@AlexxIT thanks I will try it out.
@jmmcbrayer
3 жыл бұрын
I got everything working according to this video but testing with an rf motion sensor it always shows as on in home assistant. I can manually set the state to off and trigger the sensor to change back to on. Does anyone know how to set the state to off with an automation?
@ferencgaborsimon245
3 жыл бұрын
Nice, but seeing this tutorial makes flashing tasmota to a sonnoff actually looking more easier :-)
@davecoates2308
3 жыл бұрын
A scholar and a gentleman! Thank you! :)
@frzbgolfer
4 жыл бұрын
Sweet! I've been contemplating doing a garage door opener with the sonoff sv but haven't messed with sonoffs yet. I have no doubt I could flash tasmota or esphome but now that connecting it to Home Assistant without flashing is an option, I think I might just try it this way! Time to order a sonoff sv and a reed switch. ***Edit - Actually is that even possible?
@vasiliserbin
3 жыл бұрын
Thank you, Justin! I'm digging into the HA world. This video was quite informative.
@mustafacanpolat5395
4 жыл бұрын
Sen bir adamsın, beni flash derdinden kurtardın hacı abi.
@BlueTaIon
3 жыл бұрын
Just a heads up, Sonoff LAN is listed in HACS now, so no need to add as a custom repo!
@VeyrmanKatituta
4 жыл бұрын
Hello! It turned out funny, I speak Russian and through you I found this author who speaks Russian. I went to study. Thanks!
@sll9414
4 жыл бұрын
ha! i knew you gonna love it :-) but you forgot to stress the most important point: all the devices continue to work with ewelink!
@Santiapps
3 жыл бұрын
Hi. I copied the folder/files into custom_components folder inside config on hassio and after restarting the server I still cant get hacs to show up on the Integrations list. Any idea what else I could do?
@titusdb
4 жыл бұрын
Can you please make a video how to setup sonoff door and motion sensors trough the rf bridge with this great integration
@omaraceves
4 жыл бұрын
Yes, please
@titusdb
4 жыл бұрын
Pleassseeeeeeee DrZzs...........
@joshhardin666
28 күн бұрын
so this does still use the cloud servers to initially grab the configuration data... - which means if sonoff drops the servers, this setup will fail (at least to add more devices) - if i flash to tasmota, there's zero cloud touching - the devices talk directly to your HA mqtt server and that's it.
@cnc_mill
28 күн бұрын
Hello, thank you for your comment, I am new to homeassistant and have already integrated a few Shellys without an app, it works well. Now I need a 230v 20A+ power relay with power measurement. Do you have a recommendation that even a beginner can implement? I totally failed with TUYA LOCAL, thank you
@blopak2
3 жыл бұрын
thanks @Drzzz!! excellent video. Regards from Chile!
@mrfixers6775
4 жыл бұрын
Fantastic video as always just what i needed to bring last few switches into HA
@usmangojra
4 жыл бұрын
is it applicable to Sonoff wall switches T1, T2 as well?
@andredruyts6118
3 жыл бұрын
Amazing, it works!!! Thank you Dr ZZS. :)
@themathdude
3 жыл бұрын
If I understand correctly the little fib is that one still has to register ones devices with the ewelink cloud (has to make an account and communicate with their servers) so that this integration can find them. So what data ends up on ewelink servers?, some personal info, a list of all my devices, my public ip, maybe other info about my LAN gleaned from the ewelink app? Is there no way to just edit that json directly instead of depending on the ewelink cloud that you kinda promised one won't need. This still is not a 100% no cloud solution like DIY mode or flashing with Tasmota.
@robertlouis1616
4 жыл бұрын
Great job, very helpfull, thanks to the contributors. Had it up and running in less than an hour.
@haidavila
4 жыл бұрын
WoW! Excellent! thank you! I wish this existed before hehe
@BoostedNW
4 жыл бұрын
What do you use for your video editing?
@hunter7181
3 жыл бұрын
That hacs thing is not listed when I search for it. I have the newest release installed and restarted several times. Is it found any solutions for it yet? /Hunter
@hunter7181
3 жыл бұрын
It came a new release a couple hour after I posted here and then it was found in the search.
@brettiphone4
3 жыл бұрын
always saving my bacon with these videos
@marcomoraschi3537
4 жыл бұрын
Great video I intalled all and works great, with the switch in UI. BUT, I cat do any automation with it. I've read alexx instructions on github but, no way I cant understand what I have to write in automation. Can you write a simple code to switch on sonoff mini when a buttun is pressed?
@ZoltanSomodi
3 жыл бұрын
did you managed to solve this?
@OkOtChA
2 жыл бұрын
Hello. For some reason the "VAR" Sonoff is not detected in the yaml file... it gives me an error. Any idea why?
@keltoumdaali9013
2 жыл бұрын
hi please i have a problem with lights entities, i can't access to lightning i think because my home assistant is running inside of a virtual machine. what can i do to resolve this problem?
@AJAviator
3 жыл бұрын
I managed to add my Sonoff switch into home assistant, but when i toggle it on in HA it doesn't toggle the switch on. Any ideas as to whats wrong?
@mrcbear92
3 жыл бұрын
Same here.
@NicoDeclerckBelgium
Ай бұрын
Is there a way TODAY to install HACS... Followed three different sets of instructions (even the official EVIL way with the script piping to bash) and had to reinstall Home Assistant 3 times... NONE worked.
@jimjh2671
2 жыл бұрын
How do you do this now with the latest HA? I can not seem to add the AlexxIT/Sonoff to my HA?
@enerbot283
2 жыл бұрын
same issue here. Latest version of HA, HACS installed, Sonoff downloaded but cannot find the Sonoff integration
@Max34557
2 жыл бұрын
Thanks for the guide! Managed to get it working, but I'm not so sure about the local control. When I block my Sonoff access to the internet with a firewall rule, it stops responding in Home Assistant...
@AJAviator
3 жыл бұрын
Hi there, video needs an update, HACS install method has changed and Sonoff LAN is shown in HACS. And Configurator is called File Editor now.
@leglessinoz
4 жыл бұрын
The Sonoff Micro shows as 4 devices because the chip is a 4 channel capable chip. The software supports it but the traces for the data channels aren't in use. Check out "Sonoff micro has a secret" on NotEnoughTECH's youtube channel around 4:45 in.
@prince3121
4 жыл бұрын
Good Day DrZzzs, I'm busy installing the Sonoff custom integration, but it the SonoffLAN integration has not appeared yet. Do I have to wait or can I restart Home Assistant? Thanx
@VicFortyTwo
Жыл бұрын
It's two years later, and the great instructions in your video are completely obsolete. Any chance you might make an updated version? The code has been updated and it appears to be a supported project, but they do not provide the info you need to install it.
@nayz-
4 жыл бұрын
Great vid, now we need something for Tuya!
@lynnsure
2 жыл бұрын
This is super cool. I followed the Github page and my Ewelink devices are working. but the HA recognizes them as Entities instead of devices, any solution to change them to device?
@Airbag888
4 жыл бұрын
I'm too excited to finish watching the video (I will) can you get granular support for Sonoff pow r2?
@mfavinha
4 жыл бұрын
hello DrZzs, do you have a similar for Tuya? To not have to use cloud for Tuya without having to do Tasmota? or only with tasmota? thanks
@calendil
6 ай бұрын
Hello, I am late in the game. Thank you for the video. I see that it is 4 years old. Is this still up to date? Is there a better way now?
3 жыл бұрын
Thank you man ! Worked like a charm !
@FluFilmPro
4 жыл бұрын
Hi there. I want to use sonoff with its ewelink app. but I have a question. what will happen when I install a sonoff product to my current existing internet and router, but later my internet provider and router changes.? I am not sure if I can use the already installed sonoff products with the new internet and router, can I.?
@AlexxIT
4 жыл бұрын
You will need to set the same wifi name and the same password on the new router
@MsVincentC
3 жыл бұрын
Hello, I have a question if we do not have internet in the room but we have wifi all sonoff devices will switch to this LAN mode - in this regard what happens to the devices in the home assistant? Are they disappearing? What happens to scenes if the devices we set up in the home assistant have no connection to the ewelink cloud? ------ My question is related to the fact that I want to do automation that is local and if by chance there is no internet so that the scenes are not interrupted/disappearing. Is this a solution using home assistance this way? Thanks in advance!
@cyberhek
3 жыл бұрын
The Sonoff Basic entity shows up in Home Assistant but not the device so I can't create automations that require a deice entry. How do I get this device to show up?
@Caddyman68
3 жыл бұрын
I have the same problem. There is a "Call Service/ send Sonoff command", but not sure what else to input. Possibly something like "turn-on/turn_off" and the device id, but if the syntax and terminology were incorrect it wouldn't work. Many possibilities. edit: I just used a scene inside of my automation to get the device to turn on. ACTION - ACTIVATE SCENE - ENTITY (Sonoff device). You must first create a scene, choose "entities without device" and set the state of the entity - I made one for on and one for off. Might be a better way, but it works
@absolutelynobody2240
2 жыл бұрын
I had same problem and with some help found solution: in automation choose "call_service" and then "Sonoff: send_command" and fill service data with device: 1000654387 switch: 'off' to make off automation. If you need turn it on, just replace "off" with "on". Notice for device use only part after underscore, for me it was switch.sonoff_1000654387
@toshymaeda
4 жыл бұрын
I'm new in this "HA thing", but it worked just perfect! Question: there are no HA devices for these sonoffs, just entities. Does it make any difference? Can/Should I create these manually? Only thing I could notice until now is that I can only assign HA devices in the new Areas feature. Thanks!
@giluriel
3 жыл бұрын
Hi, Loved your video and right away used this method :) works great. One question: HACS itself appears as a device. The sonoff units underneath it are not. As far as I can see they are entities. So, how do I address them in automation? Scenes etc..? Once again, Many thanks
@ShicoRUS
2 жыл бұрын
The same question...
@barie1
4 жыл бұрын
Hello, I have installed the Sonoff on the Home Assistant. On dashboard I can control all devices and it is working prefect but when I am using Node-Red it is not always connecting , I see randomly authorization problems… any ideas?
@kimnser8017
3 жыл бұрын
Thanks for a great video. Sonoff now works in my HA. I have a little problem. When I try to make a script, I can not select my devices under "devices". I can only find them under developer tool. Do you have a solution for that? Thanks Kim
@groentoft
3 жыл бұрын
Do you know if it’s possible to use temperature from a sonoff TH10 as a trigger to switch on the same TH10?
@didactics
3 жыл бұрын
I love HA and your videos but this stuff NEVER, EVER goes smoothly for me. Even following step by step I tussle for 2-3 days to add integrations. I’d love to get rid of my SmartThings hub but the troubles I go through are priceless. Enough ranting . Great job Z!
@yourpalfranc
3 жыл бұрын
Hi, Z-Man!! I just got a Sonoff S31 to play with. Is this configuration still holding up for you?? Thanks!! ~Frank
@b0neme
2 жыл бұрын
So when I setup HACS with the Sonoff integration, I need to give my eWelink login, as you said. But if I then block eWelink's servers on my firewalls, will HACS / Sonoff still work as it can't get to wWelink to login?
@dave412r
3 жыл бұрын
Please help. My wifi Front door switch just shows unavailable
@KPeyanski
4 жыл бұрын
I saw that you changed your mind and didn't include my HACS video (sad face). Anyway very good find and great execution.
@DrZzs
4 жыл бұрын
I did include it! as an (i) card a few seconds after Jenny's You're doing great videos. Keep it up!
@KPeyanski
4 жыл бұрын
DrZzs Thanks man, sorry I didn’t saw that card. Hope your video goes viral ;) Thanks again.
@joaoadrianopereira6675
3 жыл бұрын
I did it at last! Thank you!
@jorgeconduto7737
2 жыл бұрын
@DrZzs hello, i try use with MS01 humidity, only works switch, why i dont have stats humidity? ty
@eM_Wu
4 жыл бұрын
So will it work this same way as tasmotized? How to make automations and such? Can anyone help answering this?
@trisnainvest
2 жыл бұрын
Great tutorial, I just try for connecting for sonoff pow elite to Home Assistant, but power, current and voltage not show, do you have idea for fixing that? trims
@protusi
10 ай бұрын
Please help me with S-MATE. How can I setup it for control MINIR3 from HomeAssistant?
@michaelangeloabarreto4588
2 жыл бұрын
For some reason mine refuses to connect to the eWeLink server to pull the devices. :\
@mustafaalasady2889
4 жыл бұрын
Thanks for video I have question : does the home assistant support the sence function of Sonoff device ?
@instructeurke
2 жыл бұрын
it seems this doens't work in Home Assistant 2021.12.10. You don't get the option to install the Sonoff tool.
@edenoregel8877
2 жыл бұрын
Same issue
@JohnBoudouris
3 жыл бұрын
I've been busting my head here. I've used information for various videos you uploaded and everything worked like a charm. Took some guessing coz some vids are outdated but no biggie. I got the main idea and I've setup, rpi4 with home assistant, usb zigbee with 2 sensors and sonoff TXT3EU2C. everything working as indented with all your good advice and guidance, thanks a lot for that. I do have a question that I'd like you to cover on some next video to make my home "smarter'. I've tinkered with the automations and succeeded in all of them except the ones including sonoff wall switch. They are not displayed in "deviced" in automation, only as in Action: Condition, Condition type: State and then I can find them as entities. As state I enter switch.turn_on but they don't obey me. Perhaps I'm miss leaded somehow. I would love a guild about automation-script-scene and some cover on sonoffs in them. Thanks again, you helped me reach fast a good point of upgrading my home. :D
@fredlove1402
4 жыл бұрын
You are the best! I love your videos !
@renierjoubert9176
5 ай бұрын
Is there a way to reflash a sonoff device back to Sonoff firmware?
@Tuskieee
3 жыл бұрын
Can this also be done with Tuya devices using the Smartlife app?
@Chris-lc3sq
4 жыл бұрын
I held off for so long until 2 weeks ago week when I flashed all my devices. NOW YOUR TELLING ME THAT I DIDNT HAVE TO. It was easy to flash, but it took time that I will never get back. LOL thanks for the video now go knock some people out. LOL
@DrZzs
4 жыл бұрын
Doh! sorry man! No regrets :) Enjoy Tasmota
@Chris-lc3sq
4 жыл бұрын
@@DrZzs Never a regret and never an issue. Keep up the great work.
@Airbag888
4 жыл бұрын
How would I go about to capture the pow watts used to not only store watts used for every minute but also infer the kwH consumed cumulatively over a period?
Пікірлер: 490