Absolutely brilliant to see your video.I have 2of these cd players ,one exactly like yours with the red UK badge and one without the UK badge.I wonder if that's why the copper mountings were used,for maybe to cater for the British liking for smooth sounding cd players.I love how well this player is built with quality components ,no wonder it sounds so good .I prefer mine with the filters set to number 1 or 2 for a Really smooth detailed as sound .I will not be getting rid of to these wonderful cd players , especially after your video revealing the high quality components.thsnks very much
@neovibe83
3 жыл бұрын
Just wanted to say a big thank you in appreciation for all the work you have put into this. I have this CDP since it came out and was always curious about how this special mechanism would work. And now finally I know plus I have seen it working! Top vídeo! But this raised some questions: 1) I am using it as transport with external DAC so I was especially interested in the shot where you can see the wobbling CD. Although the laser mechanism is clearly designed to compensate, I wonder what kind of modifications could be done to minimize this. Heavier weight maybe? 2) regarding the DAC chip if I understood correctly there is no information about anywhere, correct? 3) in what condition was the rubber band that spins the disc? Would it be recommended to replace it after all these years? Thanks again for your time and dedication.
@boredtech
3 жыл бұрын
Thank you for watching this video. I'm really appreciate your comment! 1. About the CD wobble. I believe that it's completely normal. CD are not perfect, also it's extremely hard to load it so it's perfectly centred. So don't worry, automatics will always keep laser in focus. 2. Yes, I couldn't find any specs. 3. Rubber band that you are talking about is only drives the sled. There is a separate motor that spins the disc. So if your disc loading mechanism works fine, you don't have to worry about it. My rubber belt was in a perfect condition.
@FOH3663
2 жыл бұрын
Back in the 80's, balancing and damping materials were sold as aftermarket tweaks. Purpose was to create a more balanced, less wobbly disc. Some of my early CDs still, to this day have these plastic/rubber rings. Some applied around the top perimeter... perhaps 15mm wide, others applied around the outer edge. Sims was one manufacturer.
@WattTheTech
Жыл бұрын
@@FOH3663 I used some of them rings you put on the top outer edge, cant say they helped but I did try them, they are still attached to my albums now :)
@morksbeanbag
4 ай бұрын
It's sitting on a copper strap because dissimilar metals prevent resonance - they have different resonant frequencies and so cannot resonate as one. Essentially its a damping method.
@fastrick
25 күн бұрын
Thank you vers much for your fantastique vidéo ! I just buy today a xa20es look like your cd player. I hôpital no problem Come with because i'm not sure if any tech want to fix problem if there!
@esel-osliki66
9 күн бұрын
@bassiliosince2798
Ай бұрын
Hello I enjoyed watching your video and it was very informative. I don't know if you can help me, but I'm looking for a plastic chassis part just below the laser and drive.
@Cerim112
2 жыл бұрын
Great video it would be fun to see how you clean the parts what kind of products you use that does not damage the boards and if you make some modifications like more dempening and exceptra.
@boredtech
2 жыл бұрын
Great point! Will film the cleaning process next time.
@tee-jaythestereo-bargainph2120
2 жыл бұрын
Thanks for the video
@artuhr24
9 ай бұрын
👏
@boredtech
8 ай бұрын
Thank you!
@audiovideolover7628
3 жыл бұрын
❤💯👍
@fluxcapacitor3273
3 жыл бұрын
I like tear down videos the most, and you're doing awesome detailed videos, you literally removed all screws :D . I hope you keep going with more devices. In this particular cd player we see really high grade audio components all over, not easy to find in these days. Only Marantz latest releases have such audio grade capacitors.
@boredtech
3 жыл бұрын
Thank you @fluxcapacitor ! I have planned more videos, but production is very time consuming. Hopefully with time and practice I will manage to release them more often.
@fluxcapacitor3273
3 жыл бұрын
@@boredtech i can understand, i tried 1min. video and it took my hour...Best of luck friend :)
@tnarch
Жыл бұрын
This is insanely good implemented video. A pleasure to watch... I have a question, i have the previous model Xe900 which has the same mechanism, but it does not spin and sometime when it spins it does not recognise the CD. The laser seem to light up, and the motor seems to work. However i have a small impression that the mechanism that holds the cd icannot move back and forth (as the laser stays in fixed position). Any further ideas?
@boredtech
Жыл бұрын
Hi, thanks for your feed back, I’m pleased that you liked it. Unfortunately I don’t have this player with me any more. I can suggest you to find a Service Manual, maybe there you will find some troubleshooting tips.
@tnarch
Жыл бұрын
@@boredtech of course it would be great…
@alwayslearning2319
9 ай бұрын
WHAT A VIDEO💌💌💌💌💌💌💌💌
@Jan-vl6fc
Жыл бұрын
Congrats and thanks for this great review.🤩 As Darko I'm also fan of CD players no matter if the theirs golden era has ended. I'm very happy with my Sony CDP - XB9320
@mrgratis561
Жыл бұрын
It's decent but you can tell this was when they weren't made so well. Cheaper. Not made in Japan :(
@boredtech
Жыл бұрын
It's a huge difference when something is made in Japan.
@michaelb9664
Жыл бұрын
It may not be made in Japan, but it’s a well designed and well put together machine. CD Players like this are not made anymore, they are all generic now.
@Synthematix
Жыл бұрын
Does this support CD TEXT ?, the copper block on the transformer is a heatsink
@boredtech
Жыл бұрын
I don't think that transformer needs a heatsink. I don't have this unit anymore but I'm sure that you will find technical specifications very easy.
@michaelb9664
Жыл бұрын
Yes it supports CD Text. I’ve had one of these from new.
@Synthematix
Жыл бұрын
@@michaelb9664 Thanks m8
@michaelb9664
Жыл бұрын
@@Synthematix no problem 👍
@RUfromthe40s
10 ай бұрын
sony cd players were good till the second change of designi have two friends who have them since 84 and not one failed but the next series till 93 that i know off are a pit of problems
@guydivosta4075
Жыл бұрын
Thank you for making and posting those videos!
@boredtech
Жыл бұрын
Glad you like them!
@OmarSharif-mi3ql
4 ай бұрын
Dear Brother, it is a unique opportunity to know the details. Our heartfelt thanks to you. Sharif
@h0ll0wm9n
Жыл бұрын
Outstanding production, sir! Now THIS is how teardown videos should me made.
@boredtech
Жыл бұрын
Thank you very much, I'm trying my best.
@RUfromthe40s
10 ай бұрын
no one dies with 220 volts it´s a bit BZZZZZZZZZZZZZZZZ but not more than that
@RUfromthe40s
10 ай бұрын
but with sony anything is possible
@ZekeMidasWolf
Жыл бұрын
Thanks for a greath video. Do you know how to adjust this player? In the service manual it says that an adjustment terminal TP21 (ADJ) should be used. I cannot find any info on this terminal anywhere. TIA.
@boredtech
Жыл бұрын
Hi, unfortunately I don't have his player anymore.
@pbsa1979
2 жыл бұрын
If you fancy a challenge, I have a Technics RS-A6Z that recently decided it had enough... Taking that apart is a pain, I stopped on the main cover.. These loading systems were quite popular in late 90's, most big names had at least one player with a quirky transport mechanism. Cheers.
@boredtech
2 жыл бұрын
Oh, cassette deck. I'm super exited! I have a lan to make tear down video of at least of different media format unit. Blu Ray, CD and MD is done. VHS, MC, DAT, LD and turntable in plans. If you you instagram, please find me there. account: bored_tech
@WattTheTech
Жыл бұрын
Ive just purchased this from a friend (not got it yet) its a silver Sony CDP-XB930 QS, but my friends also has a headphone port on the front I guess yours does not for some reason but same model number. Would you recommend my friend ship it with the puck removed? Do you have any information about what the mechanism does for playback if anything. Can it give better performance with a static laser? Or is it a fancy design with no performance gains 😉
@boredtech
Жыл бұрын
Yes, I believe it safer to remove the puck and secure it outside the unit. CDP-XB930 has very interesting design but I don't think that it would do a massive difference. Overall it's is a great player. By the way. I saw a CD player which need the cd to be loaded upside-down. Would love to tear that one down.
@WattTheTech
Жыл бұрын
@@boredtech I assume that's the Pioneer Stable Platter model. That was so cool when that came out that I went down to my local hifi shop to see that one in person. It also features legato link processing. It had a different sound, but it was not night and day between my current player at the time, which I think was my Philips or Marantz (maybe Technics); my memory is a bit fuzzy now, so long ago. But the Pioneer was super cool to see in person at that time. I never did get one, but a few years later I got a Pionner LaserDisc player, and that had a legato link, so I was able to test it. It was not a massive improvement in sound; it just sounded different. Thanks I will get it shipped with the puck outside the unit.
@FOH3663
2 жыл бұрын
This was fascinating. I don't recall this particular Sony... quite the unique application. Thanks for this
@boredtech
2 жыл бұрын
Thank you very much for watching FrontOhHouse-3663!
Пікірлер: 57