If you think it's a dc-dc conveter problem, why didn't you manually provide the voltage to the circuits and try to power it up? You could guess the voltages by the capacitors voltage around it. If it takes four AA, why do you need a DC to DC converter? 6V is high enough to provide good power for small headphones.
@svenschwingel8632
2 жыл бұрын
The DC/DC converter also provides the necessary higher voltage to the LCD backlight system and I think the capstan motor (which drives the entire mechanism) runs off 9 or even 12 Volts. The D7/D8 portable DATs were based on the D3 design which had a native 9V power supply. The next iteration, the D100, ran off even smaller 3 Volts of battery power.
@12voltvids
2 жыл бұрын
According to the owner it powered up on adapter, but not batteries. Will be revisiting this again as soon as I get a chance. Spent the day dealing with a laserdisk player.
@12voltvids
2 жыл бұрын
@@svenschwingel8632 Multiple voltages, both positive and negative.
@Raptor50aus
2 жыл бұрын
My D8 DAT Walkman looks like new not a mark on it and works great. I took your advice from another video and picked up the grease you recommended to lube the guides. :)
@Raptor50aus
2 жыл бұрын
The DC DC converter CP501 has an output of 8V and 4V so you could use your power supply to connect these voltage directly to test?
@chriscutress1702
2 жыл бұрын
I've got some TASCAM units that have a similar problem when on battery power but thankfully work fine with the AC to DC adaptor. The fact that 2 different model devices have the same problem makes it interesting and possibly a design flaw. Luckily I don't need to run them off batteries.
@madpom2
2 жыл бұрын
Love the background music
@svenschwingel8632
2 жыл бұрын
Sounds like Brian Culbertson to me
@12voltvids
2 жыл бұрын
Just a radio in the background. Whole house has that station playing all day. When not home it keeps the cats content.
@madpom2
2 жыл бұрын
Need more shorts of your cats plrase
@nickbenke3306
2 жыл бұрын
It could be the switch inside the power connection that isolates the batteries when a mains adaptor is used?
@12voltvids
2 жыл бұрын
Yes. The plug has a switch and on this model is on the negative terminal. Looks like there may be 2 switches in it as there are 5 terminals on it. Since I don't have this adapter (special size plug) I ended up bypassing the switch and that brought the battery voltage up and Wala the DC DC converter came to life. Part 2 the mechanism repair will be up shortly.
@robjac8772
2 жыл бұрын
Im stuck.. my A-Class stereoamplifier shows 21% more voltage, than the wiring diagrams says on +-VCC, on both chanels.. +57v instead of +45v.. 1 common trafo for left and right card/chanel.. any tips of how searching.. is it capacitor related/zener/resistor or trafo.. ? the amplifier works but should it be so much voltage, zenerdiod working hard to get rid of voltage and 2 resistors gets really extremly hot..
@arsalanjaveed8918
2 жыл бұрын
Hey Dave, could you specify the make and model of this new soldering iron? I really liked it and seems its a tool one can keep in his goto toolkit
@lachlanlau
2 жыл бұрын
Miniware TS100?
@12voltvids
2 жыл бұрын
@@lachlanlau Sequre SI012. The review video is up.
@dylandavis934
Жыл бұрын
Hey man, I just bought a tcd d8 that works really well, but only if it is using the power adapter. Battery tray looks great but device won't turn on with batteries
@12voltvids
Жыл бұрын
Could be the power jack. Has a switch inside that disconnects the batteries when power plug inserted. That switch goes bad and won't reconnect when power adapter removed
@dylandavis934
Жыл бұрын
@@12voltvids is that an easily accessible part? Or replaceable? Also to note, the guy I got it from was using a 5.5v power adapter, thinking about buying a 6v one, not sure this is relevant
@12voltvids
Жыл бұрын
@@dylandavis934 it's accessable
@dylandavis934
Жыл бұрын
@@12voltvids is that something I can fix easily or is not worth the effort? Is it a swap part job or fix the current part? Thanks
@zx8401ztv
2 жыл бұрын
Hmm, not an easy part to repair. It seems that sony never fixed the converter It's smd scale and you would likely need a microscope to see what you were doing. Not worth the trouble. Nice slim soldering iron, but i wonder how long the element could cope with multiple full power instant heat ups from sleeping.
@12voltvids
2 жыл бұрын
Apparently lots.
@12voltvids
2 жыл бұрын
Service part. Same for the board. Under warranty was swapped out.
@PaulJCost1
2 жыл бұрын
I have a unit that was just like that... no power. It was the Transformer yellow input that was blocking the batteries power due to twisted pins inside. Check that please. When a external power supply is plugged in it acts as a switch and cuts the batteries power out.
@12voltvids
2 жыл бұрын
I see the battery voltage going in and back out of the external power connector. Unfortunately I di not have an adapter to test with. The adapter I have even though the plug is yellow is a larger size and does not fit.
@PaulJCost1
2 жыл бұрын
@@12voltvids Try to check that out even with injecting the 6V directly on the yellow plug and see the results, if nothing happens its the DC to DC converter thing.
@PaulJCost1
2 жыл бұрын
The one i have had that problem all because of that yellow external power connector. Insist on it maybe you will get some positive results out of that.
@12voltvids
2 жыл бұрын
The power connector was the power problem. Positive was passing through it but the ground side had high resistance. Not open but high enough that the DC DC refused to start.
@PaulJCost1
2 жыл бұрын
@@12voltvids Mention my name in your revisit video if you do one about it... you own me one Dave! 👍 I love your videos about walkmans and Tape Decks! I got a Technics B755 3 Head Direct Drive (what do you think about this one?) See you soon my friend!
@litzdog911
2 жыл бұрын
Looking forward to a review of that soldering iron!
@12voltvids
2 жыл бұрын
It's in the can. Will edit probably today.
@svenschwingel8632
2 жыл бұрын
What a coincidink. I just got one of these two days ago.
@enricoself2256
2 жыл бұрын
The idea of DAT walkman is a bit odd to me: the complex tape transport and the need for high power capacity is quite against the idea of portability. What is great about that era is that Sony ventured in the design and manufacture of products which would surely sell in very little volume. Sony products portfolio in the 80's and 90's was huge, something completely unthinkable in these days
@12voltvids
2 жыл бұрын
Well these were not designed really to carry around and listen to music although I'm sure some people did. On batteries they were actually quite efficient and lasted a long time set a batteries would run for many many hours and most people would run rechargeables in them. DAT Walkman we're real popular in the pirated music scene. People would smuggle them into concerts and make bootleg recordings and being digital they can get the best sound obtainable in the stadium. I originally got one to play tapes in my car. Then a car player came out which was quite nice I had one of those too. They were quickly replaced by mini disc. Teac and tascam had a few portable models that were quite a bit bigger than these tiny Sony walkmans but they were more geared to professional use with things like XLR connectors for professional microphones or connecting to mixing consoles. Many live recordings were done direct to dat from the mixing console using one of these tascam or teac decks. They are my favorite of the portable style because they use full size transports that are much more reliable plus the transport can be lifted out of the cabinet and worked on separate. But then you can't put them in your pocket as her the size of a portable tape recorder but more features more input output capability no special cables needed they have lots of pluses
@olledahlquist3784
2 жыл бұрын
I can recommende IKEA:s rechargeable batteries named LADDA. They are made by Panasonic and sold as ENELOPE. But, IKEA:s is much cheaper. There is only one factory in Japan that makes recharegeable batteries and that is Panasonic. So the Enelope is the same as the Ladda. The other brands are made in China, and not of such high quality.
@dasani383
2 жыл бұрын
Hi, I’m from Vancouver and found your channel through Reddit. I was wondering if you want to buy or know where I can sell a huge Sony VPH-D50HTU CRT projector?
@12voltvids
2 жыл бұрын
Put it on facebook market place and someone will buy it
@mrpedrodrodriguezsr7628
2 жыл бұрын
Wow! Is this DAT the smallest ever built Dave ?
@12voltvids
2 жыл бұрын
They had a few that were smaller but used a different tape. This is one of the smaller standard dat they made.
@crashbandicoot4everr
2 жыл бұрын
@@12voltvids Yeah the NT cassette. Only slightly larger than a 2€ coin.
@12voltvids
2 жыл бұрын
@@crashbandicoot4everr a format I am quite happy that I did not acquire
@thepastcomesalive2082
2 жыл бұрын
Sony is usually a good make, but sometimes especially these days I guess some of the people who work there don’t know what the hell they are doing. For example do you remember RadioShack in circuit city? Before circuit city went out of business people there didn’t know what the electronics were and they should know they should be experienced in that, RadioShack the same way. Years ago in the late 90s early 2000s I tried to find a battery for my cordless phone and we went to RadioShack, these people acted stupid and they didn’t know what we were talking about when we showed them the battery that we needed they kept giving us the wrong one and it didn’t fit the phone, then finally we ran into this woman Hill either worked for RadioShack or didn’t work there anymore I don’t remember but anyway we told her the problem and she said I don’t know why they are acting like that and she was able to get us the right battery. you have to wonder why we don’t get good help anymore, well that’s a big part of the problem these days.
@12voltvids
2 жыл бұрын
It was "just a job" for those folks. They don't care.
@thepastcomesalive2082
2 жыл бұрын
@@12voltvids I agree, people need to care more about the product they are selling or fixing. There was a time when people actually cared I don’t know why they don’t care now.
@young_of_the_mill9560
2 жыл бұрын
He’s slinging those parts lol
@alexslingsby1883
2 жыл бұрын
Why would anyone think a 20 year old broken tape player is worth $1,400? Lol
Пікірлер: 51