Good video, but u must add details. So READ AFTER THIS for details like TEMPERATURE. Problem was a video chip (bsod, blinking light, black screnn, no boot, point on screen...) This repair (reflow) can work 6 month or better, for better results you need : 1- heat gun 2. thermometer 3. flux (very important) 4 Kapton tape (heat protection) or silicon pad like cooking stuff to protect other cms components you must do : - Set the heat gun on 400° Celcius, - Add solder flux, very important for corrosion - Protect with kapton tape around the chip. - heat the chip carrefully to 200 ° celcius or little more. heat slow at start But Be carreful. If this don't work or chip is down again after 6 month you need a complete BGA reballing. More difficult ^^ i'm a Reflow lover, cheap solution, if you play games, forget this solution, laptop fan must be cleaned, change thermal paste, This can work 6 month or less or more. good luck
@sixpackbinky
7 жыл бұрын
you didn't show it was bad to begin with , no directions, just took apart and put back together, what did you actually do to fix it? All I saw was wiping it a few places , hand movements no actual repair...
@piotrmuralle7583
7 жыл бұрын
whats the temp. and time? why didint u use any thermalpaste?
@faciolgaming1504
4 жыл бұрын
Ill try this re heat but after 2 weeks...its coming back again issue...re heat and reheat again and again coming back..... Issugest to reballing the graphics card
@funkydevil13
4 жыл бұрын
I have Sony Vaio. There is a auto shutdown problem. I take it to local service person. He said it's problem with its ati Radeon graphic card. He will disable graphic card physically at chip level. Or switch to Intel graphics. Is it possible to disable card physicaly in motherboard chip level
@itsrohitlohia
4 жыл бұрын
I have same problem, auto-poweroff after ~1min. service person said same thing to me as well. Did it work for you?
@funkydevil13
4 жыл бұрын
@@itsrohitlohia hmmm . Repair person said there is a chance if they cut off graphic card supply it may or may not work . So I didn't take risk yet. But yes i will get it repair because otherwise it's not working anyway..
@aarsbilling
8 жыл бұрын
I have a Sony Vaio all in one. Is it the same procedure.
@УЛ314-38
3 жыл бұрын
what was the issue on a first place?
@brunoshimada
8 жыл бұрын
What is the temperature? and Time ? thanks
@samelliott3120
8 жыл бұрын
Can you tell me the name of the graphics card in the machine? Please thanks in advance
@ZeRo_deez
4 жыл бұрын
i have sony vaio laptop intel HD graphics can change it to nvidia
@blancogo
6 жыл бұрын
Gracias me has ayudado a recuperar un sony que ya dábamos por perdido
@soijiro666
6 жыл бұрын
Que hiciste ?
@Rayankady
9 жыл бұрын
i have the exact same problem, Just can't find that tool you are using. What is it called? is there an alternative for it? thx
@indigosunset70
8 жыл бұрын
+Michael Kdy its a "heat gun" but you can use a blow dryer bro.
@ig6438
6 жыл бұрын
what if it still doesn't work after this? does this mean that my gpu is blown?
@nasroedward
6 жыл бұрын
It works thanks alot men thank you so much for your help
@itox85
9 жыл бұрын
what is it that you do to your vga?
@pjworth6121
7 жыл бұрын
itox85 He is heating up the area to melt the solder and (hopefully) let it make better contact as Sony (laptops, televisions) have been known to be prone to weak solder points. I followed this procedure and it worked great for me! Used my heat gun on low (750F) and tested it on some solder to see how quickly it melted it. I used some foil to insulate the surrounding area and heated the gpu. As an aside, I cleaned the thermal paste from the cpu & gpu and applied some of my own. The gpu needed a little extra so there was no gap with the heatsink. This video wasn't the clearest but it works.
@GrApHicFanatic1
6 жыл бұрын
I try other options but my laptop is not giving display , let me try this
@pathtounknown2309
8 жыл бұрын
what you did bro......and what is the actual problem
@j.mendoza9114
2 жыл бұрын
para calentar no necesitas quitar la claca del chasis
@mariosarabia4538
6 жыл бұрын
good track lol
@АлександрГлубокий-ю1х
5 жыл бұрын
He is "world best fixer"! I hope I'll never have business with him.
Пікірлер: 26