Honestly the build quality alone doesn’t look dated at all!! It is amazing. I love Sony. They’ve always been ahead of the curve.
@SkyFiAudio
Жыл бұрын
Right? Looks like it could be current model and fit right in.
@jimgd4
Жыл бұрын
Those pieces are just astounding... being that Sony's USA Headquarters are not far from you in northern New Jersey, my bet is that they were shown years ago at Vegas and Indianapolis, & then years later some wayward employee found them in a storage closet...
@peterc3143
Жыл бұрын
I remember hearing this combination at an audio shop, with the speakers that went with them. From what I can recall, the sound that came out didn’t shout at you, but was very enjoyable and sweet. You could easily sit down late at night, with a glass of wine and just close your eyes while enjoying the music.
@st3althyone
Жыл бұрын
Wow! The level of engineering in these units is impressive. Thank you for bringing us these two masterpieces.
@SkyFiAudio
Жыл бұрын
Glad you like them!
@TommyTCGT
Жыл бұрын
And what do they sound like? We dunno but the 1/4'' Aluminum top plate is cool... yeah. right.
@robertsupercalifragilistic7404
Жыл бұрын
I owned these two models along with the SCD-1 circa 2003, they are absolutely amazing
@SkyFiAudio
Жыл бұрын
Sorry I didn't have the SCD1 for the video. Should have held on to it.
@tumslucks9781
Жыл бұрын
You mean aStOUND-ing!
@radeon789
Жыл бұрын
denon pma110 or sony???? need some advice
@dougg1075
Жыл бұрын
@@radeon789 Denon
@radeon789
Жыл бұрын
@@dougg1075 why?
@DJust-bv1sb
Жыл бұрын
Sony made this amazing HIFI system to promote the Super Audio CD which was meant to replace the CD. The first units were presented in 1999.
@SkyFiAudio
Жыл бұрын
Makes sense. The SC1 was beautifully made but it certainly not at the level of the amp and pre. I guess they expected to sell many more units (which they did) so they had to keep a reasonable price point and profit margin.
@TwistedCreations1980
3 ай бұрын
@@SkyFiAudio😂 Dude they made the scd777es to accommodate the demand ! Makes no sense what you claim here. Also I know you never sold the setup as it's still for sale !
@Sean-fj9pn
5 ай бұрын
Good engineering is timeless. Amazing build quality. Wish SONY still made these halo flagship products.
@DanHomeAtLast
Жыл бұрын
My father was a sony repair and education tech for nearly 40 years. It's correct to assume these units didn't turn any profit, the main reason for them to be produced was to show off sony proprietary components probably mainly the transistors, ICs and build quality, if not to prove that Sony was capable to exceed industry standards but to solidify its market domination in audio. 27,000uf filter caps!!!
@PrimeHiFi
Жыл бұрын
Hey Fernando, thanks so much for sharing this beautiful set. They pulled all the stops for them. Riken resistors, Elna Silmic capacitors, tons of what appear to be silver mica capacitors, lots of thick gauge solid copper bus bars for the lowest possible impedance, and look at how beautifully the circuit boards are constructed! Seriously one of the best ever built. Even TOTL equipment of today can barely keep up. This set made no financial sense for Sony, especially when they supposedly only build one hundred of each. This was likely a long time Sony Engineer’s pipe dream brought to life, probably as a retirement gift to the company and himself. I love this series, it’s like a real time / interactive TVK museum. I’d really love to see more and more. You have a beautiful shop and have some great people working for you. I talk with Ben from time to time and he has a serious head on his shoulders. You’re lucky to have him working with you. Hope to see more videos soon!
@SkyFiAudio
Жыл бұрын
Thanks for your words of encouragement Connor. Yes Ben is a rockstar and and fun to work with. I like your comment about how this set being some engineers pipe dream gift. lol. Cheers mate.
@hermanmunster3358
Жыл бұрын
Simply beautiful pieces of HiFi. Sony were never afraid to push their own boundaries to show that a volume manufacturer, could still produce unique products that were truly great. And the thing about Sony, which I have always loved, is that their products were always fairly priced, and you could buy their products with confidence that they were always of a decent quality.
@SkyFiAudio
Жыл бұрын
I agree. Still today they are making stuff that is a great value and pushes the boundaries. Look at the HAP-Z1 streamer for example.
@juancarlosortiz1466
Жыл бұрын
An absolute masterpiece 😮
@henriknymand7259
11 ай бұрын
Indeed!! I have three systems of this combo and the built quality is amazing!!! 😍
@muppetb.lansing8374
Жыл бұрын
Sony's best audio success IMO was their VFET amplifiers. I have three DIY Sony VFET amps and the sound is incredible.
@SkyFiAudio
Жыл бұрын
Thanks for sharing
@m6j159
Жыл бұрын
Drooling...quite simply drooling🤤👍👍
@barskuleli8612
7 күн бұрын
Amazing engineering and tank-like build quality… Two gems of hi-fi history. Thanks for the video…
@Channel-cm7yc
Жыл бұрын
Some Sony ES’s engineering talent was essentially done in the US in the 90’s. Dan Anagnos was one who was a loudspeaker designer from Polk Audio who did the SS M9’s loudspeaker serise. This stuff was engineered for the audiophile world and entered the audio market back in 1995. Lack of Complexity is a high end virtue and high quality means high current which is paramount and this is typical high end circuit topology which is likely done by an independent design engineer contracted by SONY.
@niallearly426
7 ай бұрын
❤ wow excellent piece of audio knowledge 👏 👌 never new that I've seen how far Dan has come so it's great to know about this audio history thanks for sharing buddy 👍
@AudioElectronicsChicago
Жыл бұрын
wow, they put some quality in these
@SkyFiAudio
Жыл бұрын
They went all out.
@danhorton6182
Жыл бұрын
I recently did a repair/restoration on these two units along with the SCD-1 disc player for a long time customer. The player stopped playing SACDs and needed a new laser. The preamp and amp needed various things done, but beautifully made!
@anthonycasey5351
Жыл бұрын
I own the Power Amp so would be interested to know exactly what you had to do. I currently have no issues with mine but I can't think of the day that one day it might cease because it sounds so beautiful. I leave it switched on 24/7 even when am not using it. I don't want it to go through the power ON / OFF cycles. Any advice really appreciated.
@danlivni2097
Жыл бұрын
@@anthonycasey5351 What preamp are you using?
@anthonycasey5351
Жыл бұрын
@@danlivni2097 Hi Dan I used to run it off a Rotel Pre-Amp but now it's connected direct to my Bluesound Node 2 streamer.
@batmandestroys1978
Жыл бұрын
@@anthonycasey5351 Hi Casey, the amp is very reliable and breakdown are very rare! The parts what will need service is some capacitors. The large filter caps are fine, just the smaller caps!
@202One
Жыл бұрын
Beautiful layout, inside an out..! SONY 🍾👑👏
@SkyFiAudio
Жыл бұрын
Yes indeed!
@ousi00
Жыл бұрын
The actual final masterpiece from Sony were the TA-ER1 preamp and TA-NR1 (or NR10) monoblocks. The N1 and E1 were released with the SCD-1, which makes them "later" but the NR1 and NR10 were true Class A cost-no-object masterpieces.
@SkyFiAudio
Жыл бұрын
These aren't "cost no object masterpieces"?
@dougg1075
Жыл бұрын
That NR10 is beautiful
@boedilllard5952
Жыл бұрын
Their ES stuff was amaing! A lot of bang for the buck IMHO. I'd love for them to make it again - really good quality for far less than the competition.
@SkyFiAudio
Жыл бұрын
Its a mixed bag, some pieces are great some are marginal. Thanks for commenting sir.
@qddk9545
Жыл бұрын
I once had a ES9000 top of the line pre amp. It was a work of art, never seen anything like it, but did it sound good - NO, not at all.
@boedilllard5952
Жыл бұрын
@@qddk9545 I had the TA-ES9000 combined with some Anthem Amps - sounded great to me. I replaced it with an Onkyo Preamp - sounded dreadful - I gave the Onkyo to a friend of mine about a year and a half later and went back to my Sony. I'm currently on a Marantz 8802A but will probably replace it with a Monolith HTP-2 when they come out.
@asplmn
Жыл бұрын
Gorgeous! Can't wait for you to visit some VFETs. Many who have heard the high-end VFET amps have said they're amongst the best ever.
@KillerKlipsch
Жыл бұрын
Just Beautiful
@mikevincent6332
Жыл бұрын
The encapsulated modules are a instrumentation amplifier circuit, for balanced inputs - you could probably design a drop in replacement if you had to - its basically 6 op-amps
@montech5647
Жыл бұрын
Would be fun playing with 0pamps' rolling...
@keithgregson9573
Жыл бұрын
>Burson Audio will be able to scrutinize those 'encapsulated modules' most likely same discrete symmetrical op amp design stages (if i could replicate Burson op-amps could be dropped in here) i'm surprised you mention pre-amp component count looks sparse, seems to be nominal for high end layouts, nice to see the extra copper, stunning piece of gear you are very fortunate to have this opportunity, never separate these two pieces, thank you for sharing!
@calvinkan3449
Жыл бұрын
The second RCA input on the power amp maybe for home theater incorporation. And the 100kHz response aims to meet the specifications of sacd. Nice review, thank you.
@SkyFiAudio
Жыл бұрын
Thanks for the info! My dog can't even hear over 30k.
@chma9503
Жыл бұрын
I used to have the SCD-1, TA-E1 and SSM9-ED speakers. My preamp didn’t have a SN sticker on the back and had the not for sale sticker on the bottom, that may as well of been mine! I never got the amp, but I loved the preamp and SACD player. Like mentioned, I was afraid the SACD player would eventually fail and sold my system. Sure wish I kept the whole package and tracked down the amp! I’ve never had anything with a quality build such as these. Thanks for making the video!
@kamimcmmm
Жыл бұрын
What happened to the speakers? Sold them? What’s your current speakers?
@SkyFiAudio
Жыл бұрын
Those are serious speakers, we had a the non ED set here a few years back and the were very nicely made. Dont know what to make of that not for sale sticker. Wish someone would comment.
@anthonycasey5351
Жыл бұрын
@@SkyFiAudio Are the Klipsch RF-7ii speakers any match to those Sony SSM9-ED speakers? I have the TA-N1 powering my Klipsch and it sounds so amazing. The stereo separation is second to none. Source is a BlueSound Node 2
@csj9619
Жыл бұрын
Never seen these components before. Never really into the home stuff, but am a fan of Sony's Mobile ES line from back in the 90's and 2000's.
@SkyFiAudio
Жыл бұрын
Did they make nice stuff for Mobile? Which would be the best piece too look into?
@insolentstickleback3266
Жыл бұрын
Thank you for featuring these magnificent components! Appreciate you spending the time to create a channel and share these fantastic pieces.
@SkyFiAudio
Жыл бұрын
Our pleasure! Glad you enjoyed it. Pls subscribe!!
@patrickwalsh467
Жыл бұрын
Very well shot and narrated. One can dream.
@SkyFiAudio
Жыл бұрын
Thanks Patrick. I put a little more effort on the videography on this one. Nice quiet Friday at the shop so I had extra time.
@morrisonAV
Жыл бұрын
@@SkyFiAudio Those rolling bars from your lighting didn't help you. Usually comes from the light being too bright which forces the camera to go to higher shutter speeds which in turn causes the bars. Otherwise, a splendid display of gear!
@playbackvintagehifihunter9669
6 ай бұрын
Ive said to myself I wont ever own "Big" hifi components again.. but this system is one I would never let go if I owned it.
@aegisofhonor
Жыл бұрын
if you want a similar amp to the TA-N1 and don't want to pay that sort of money, get an NAD 208. The NAD 208 has way more "juice" as it pushes 250 watts in to 8 ohms. And again, it's far more common and far cheaper often costing well under $1000, compared to TA-N1 often selling for north of $10,000 on the used market on the rare cases they do come up for sale. Obviously the Sony TA-N1 is a pretty good amp, but it's obviously a unicorn that only a handful of lucky and wealthy individuals will ever own, the NAD 208 is a realistic amp that almost anyone can own for about a grand or less.
@82ivaylo
Жыл бұрын
NAD=New Acoustic Disaster...,no thanks.
@GovaniSasi
7 ай бұрын
This line was not for sale at the time. SONY made it only for promotion/presentation of SACD, together with ED speakers.
@ousi00
Жыл бұрын
I remember seeing SkyFi having these in their inventory since 2020...
@SkyFiAudio
Жыл бұрын
You'r probably right. Time flies. Haven't been very motivated to move them on since they are so special.
@RichiSweden
Жыл бұрын
I’m lucky to have owned the set and I feel unlucky that I sold them. Amazing sound.
@samt1039
Жыл бұрын
Some sound demos or comment on sound characteristic would be great. Thanks
@SkyFiAudio
Жыл бұрын
I have been meaning to do that. Thanks Sam.
@Watcher4111
Жыл бұрын
The best preamps have up to 4 transformers and here is 1. A bit cheap and cut costs. Separate transformers for each channel give the benefit of better channel separation than the pre with 1 transformer. The weight of this Sony is 21 kg, which shows that the money went mostly to the housing. But sure, looks nice
@SkyFiAudio
Жыл бұрын
I agree, the power supply could have been a bit more exotic and the chassis could have been a bit less beefy.
@salvadorrodenas3071
Жыл бұрын
Why is it needed more than a power transformer when this preamp has no phono amp and no HP amp? As long as the power supply has low impedance and plenty of reserves, there's no difference between one power transformer for two channels or each channel having one.
@salvadorrodenas3071
Жыл бұрын
@@SkyFiAudio the transformer is encased in ceramic housing stuffed with resin. No metal. The potentiometer is brass!! No plastic anywhere!!
@ropeyarn
Жыл бұрын
The construction shows a great deal of attention to eliminating stray radiation and microphonics. Towards the end of analog it required this much care to achieve good specs because every wire run acted as an antenna, both radiating and receiving. The relays even blocked the signals you weren't interested in from entering the box!
@stevesmyth4982
Жыл бұрын
The gold plating on the component leads has me puzzled because it can cause embrittlement. Many components have gold plated leads, one of the processes used in aerospace electronics is a two solder pot tin dip. The first dip removes the gold plating and the second dip ensures the component leads are coated with standard 60/40 solder. From an online search: Gold embrittlement occurs when the gold from a contact combines with the tin or tin-lead solder, and the gold content becomes larger than 3% of total weight of the solder. Crossing 3% causes the solder joint to become weak during thermal cycling due to decreased ductility. A weak solder joint could/will lead to a failure in your system. It is important to understand that gold isn’t going to destroy your solder joints at all thicknesses. Typically, gold plating below 20-30 µin is considered to not cause an issue. Although, below 10 µin in the contact area is considered to be ideal.
@nikkonkde
7 ай бұрын
This looks amazing. The design is similar to what the best of the best offer today. I’m sad to see Sony out of this market.
@user-hm5vi6wo6r
Жыл бұрын
You missed the fact that the boards are built on copper bass so that is super high end and make a huge difference to the build up of noise ect. but yeh you don't see that very often. Another great vid bro😊🔉👍
@ACCOUNTANTB
Жыл бұрын
The power supply main board from the preamp Is massive !! - beauty design and huge quality of all boards and components....All Japan made.
@SkyFiAudio
Жыл бұрын
Wish they still made stuff in Japan these days. I guess its gotten too expensive.
@enriquegonzalez2802
Жыл бұрын
Stunning. No flaws at all.
@SkyFiAudio
Жыл бұрын
A balance control would have been great!
@marcse7en
Жыл бұрын
@@SkyFiAudio My London (Wembley) made Musical Fidelity B200 Integrated Amplifier from 1990, has no balance control.
@DeAudiofilosyLocos
Жыл бұрын
I heard them in the Sony Ginza showroom. They were installed in a little theater, with the scd1 and Wilson like looking speakers
@SkyFiAudio
Жыл бұрын
Thanks for sharing. Love your user name!!
@kimbye1
8 ай бұрын
This was Sony at their peak. Great stuff. Aluminum must have been cheap back then :D
@dona635
Жыл бұрын
Can you imagine being a Sony designer/engineer for this division when everyone else in the company was frantic to get the latest average to sub par equipment at Sony out back then for the profits?
@antitrustnomonopoly8291
Жыл бұрын
American record labels did not let Sony introduce SACD for a decade or so. And when SACD was introduces music lovers were addicted to MP3 already.
@deangale4496
10 ай бұрын
Just gorgeous
@dbmccoy12
Жыл бұрын
Rep demo set, more than likely. What is the frequency response??? S/N, and dynamic range?
@kcg7861
Жыл бұрын
I purchased the Sony integrated amplifier that is discontinued now like 2 years ago their flagship it was pretty good but it was like it was missing something like I can't explain it I was a little disappointed but I love Sony products too I had their Flagship head unit for the car and I just love all their stuff love their AV receiver even their cheap one is very very good for what you get obviously you can't compare the cheap Avery receiver to what he has but still really good stuff
@DKBoerner
Жыл бұрын
This is a really cool review. I never saw this unit before. But since I am a Sony lover, it's a great piece of education and technology history.
@stevenpettinga7400
Жыл бұрын
Awesome. Wish I could easily afford it.
@edifierbass7821
Жыл бұрын
Yes Sony TA- N1 being massive but only for the looks never been tested abruptly in huge Party and crank it overnight with 4ohms load , i Think its just for decoration purposes
@philipketchum1407
Жыл бұрын
I would love to have them
@AllHandlesHaveBeenTaken
8 ай бұрын
I would like these for the barn
@chrissmith7069
Жыл бұрын
Thankyou for sharing! What a beautiful piece of engineering 🤩
@SkyFiAudio
Жыл бұрын
Glad. you liked it!
@irtbmtind89
Жыл бұрын
I think this type of product was made (at least) partly for marketing or a "Halo Effect" - to generate good buzz for Sony in the audio magazines and get people into stereo stores to buy something more reasonable that Sony would actually make money on.
@SkyFiAudio
Жыл бұрын
I think your right. Imagine all the tooling cost for a unit that only had 100 pieces of production? No way this made financial sense.
@puciohenzap891
Жыл бұрын
Wow, wow - for uploading such NSFW audio content there is a different 'Tube'!!! :-)))) Gorgeous gear.
@SkyFiAudio
Жыл бұрын
haha. Thanks for writing Pucio.
@jmol2049
Ай бұрын
You have a video of the Denon S1 series ?.....also real gems
@worstalentscout
Жыл бұрын
i used to sell Sony ES series and their cd players were in a class of their own at their price point............the ES amps were not that great though - they had that mosfet mist people talked about......but they still making those hi-end Qualia products ?
@BC-ni3sk
Жыл бұрын
Super clean internals!
@glegoo0909
Жыл бұрын
와우...멋지다. 이 당시의 소니는 엄청난 물량 공세를 했구나. SCD-1의 느린 오픈,로딩 속도만 참을수 있다면 소리는 최고.
@guruaudiotheexperimentvintagea
Жыл бұрын
El mejor equipo de la historia del audio
@cyber.purgatory
6 ай бұрын
Killed me watching how rough you were handling both pieces. Given the rarity and value on display I'd expect more reverence - white gloves, towels down etc. Besides that though... great video, thank you 👋
@deangale4496
Жыл бұрын
I love Sony ES gear
@MoltenJules
3 ай бұрын
With a weight of ten stone how do you actually nice the power amp around? Do you add the heatsinks once the amp is in place?
@marcse7en
Жыл бұрын
In the light of vinyl's resurgence in popularity, I expect manufacturers will start adding phono stages to their amps again? Although one can always use a quality separate phono preamp. The power amp appears to have a noticeable "ding" on the right hand side of the front panel. I'm in the UK, and I'm curious as to why Americans pronounce "Alu-mini-um" as "Alu-min-um?" It clearly had two "I's" and not one. I could ask my Floridian sister-in-law, who now lives here in the UK. Do you call Floridians, Floridans, omitting the second "I" as with aluminium / aluminum?
@SkyFiAudio
Жыл бұрын
We're lazy here in the states. Why waste the extra syllables.
@marcse7en
Жыл бұрын
@@SkyFiAudio I guess it's just the difference between our cultures? I suppose it wouldn't do if we were all the same?
@steveodian6008
Жыл бұрын
You mentioned other products that viewers would like to see a deep dive on. I would love to see a deep dive on the BHK 250 or any other products you might from PS Audio.
@SkyFiAudio
Жыл бұрын
Noted!
@michaelvaladez6570
7 ай бұрын
Yes you wonder how they made any money on these high quality end products. Only for those who had the money...in turn it would show the industry in trade shows that Sony could truly compete in the audiophile marketplace.
@LasloMildenberg
Жыл бұрын
The yellow 'not for sale' sticker means it's a sample, mostly pre production. Those were used on demotours and such stuff. Haha, you just said the same thing. My bad for commenting too quick 🙂
@SkyFiAudio
Жыл бұрын
Interesting. So its an early piece that was just for testing or would it have been a demo?
@LasloMildenberg
Жыл бұрын
@@SkyFiAudio Demo piece to show what's comming next season, like a movie previeuw for selected audience. They were just like the productionversion as far as I know (I'm no technician, I set those demo's and displaystands)
@miroslawkaras7710
Жыл бұрын
The amp have nice ooking heat sink hoeve in this case for take over the funtionality. The fins shoul be vertical no horizontal to alow good air flow.
@SkyFiAudio
Жыл бұрын
Good point. Convection cooling would certainly be more efficient with vertical slots.. Wouldn't look as cool :-)
@mkornhaber
Жыл бұрын
Great overview Fernando! Txs
@SkyFiAudio
Жыл бұрын
Glad you liked it Michael. If it gets lots of view Ill do a listening video to follow-up.
@olafschauer7763
Жыл бұрын
i mean these Amps's was designed from Nelson (Papa) Pass himself. Great Class A Design. Simply and good
@SmokinFoolz
Жыл бұрын
Super happy to find this channel. Subscribed
@SkyFiAudio
Жыл бұрын
Hey Thanks Ryan, happy to have you!
@tobybertrand6996
Жыл бұрын
Great review as always. Lovely pieces. Nice Breitling.
@capwkidd
Ай бұрын
Who makes that tools with the machined out handles?
@eugeneniemierzycki6490
Жыл бұрын
Nice job Fernando. Enjoyed it and informative as well Thanks,
@danielwilliams1921
Жыл бұрын
Very cool!
@SkyFiAudio
Жыл бұрын
Thanks Daniel.
@josephfrontiero7017
Жыл бұрын
I wish you guys when you get new equipment in and you could sell it right away you should mention the prices why are you showing the inventory if you can sell it ASAP I’ve been in audio since 1970 and my first equipment was Macintosh you guys have a lot of great stuff show me the items you have bring me back in time. Thanks for your videos.
@HowIsThat69
Жыл бұрын
Thats Truely an amazing set. Thanks for showing it
@SkyFiAudio
Жыл бұрын
Glad you like it!
@wutang3071
Жыл бұрын
Hi All, just wondering if the components degrade over time?
@RockCity1111
Жыл бұрын
This is the nicest Sony preamp and amp I've ever seen. To bad no one has bought this combination!! I actually love the look of it.
@SkyFiAudio
Жыл бұрын
For sure. Check out the NR1 piece as well.
@bbfoto7248
Жыл бұрын
@@SkyFiAudio If you do not want to exclude the hardcore Japanese collectors from considering the purchase of these rare, expensive items, I would suggest that in the future you handle these components, and any panels or other parts that you remove, like a fragile newborn baby Jesus, and ALWAYS wear brand new, clean White Cotton Gloves when handling them. ;-) While watching the video I could imagine my Japanese audio collector friends cringing each time you set down the removed panels on the unprotected workbench surface (and even once on top of the metal end of the screwdriver), as well as EVERY time you touched ANY part of the internals. These high-end pieces were pretty much assembled in sterile "clean room" lab conditions at Sony, and these Japanese collectors DO NOT want your potential fingerprints, body oils, hair, or anything else contaminating or touching ANY of the internal electronic components, PCBs, copper bus bars or pristine shielding panels, tops of the capacitors, transformers, interior aluminum panels, etc. They are absolute fanatics about this. DO NOT TOUCH ANYTHING INTERNAL unless you absolutely have to in order to perform a necessary component replacement or repair. I could also imagine my Japanese buddies cringing when you flipped the amplifier over onto its anodized or powder-coated heatsink on the bare workbench, LOL. Japanese techs and HiFi shops use antistatic microfiber workbench "topper" pads to protect the finish of these types of rare, high-end pieces when inspecting, repairing, or displaying them for a potential buyer at a High-End shop. Just sayin'. :-P But having said all that, it's a common joke or "urban legend" by the general Japanese public that Sony purposely designs and installs built-in "timers" in all of their general consumer electronics products to trigger a failure as soon as the warranty periods expire. LOL
@robertyates9008
Жыл бұрын
Fernando talking about C/D AND SACD can you play both c/d and sacd on a sacd player? Thank you for your in depth reviews on your equipment very very interesting as I came across your channel about a yr too 2 yrs ago I’m currently living in western Canada.
@casperdowlen625
Жыл бұрын
You can play a standard cd on a SACD player. Many bluray video machines will play cds and SACDs as well.
@SkyFiAudio
Жыл бұрын
As Casper mentioned YES. Also some CD's are dual layer with both rebook and SACD.
@craigadam
Жыл бұрын
If you were to remove the base of the power amp, would this contain the class A amp PCR? This would be interesting to see.
@SkyFiAudio
Жыл бұрын
Not sure I follow. Can you elaborate Craig?
@pliedtka
Жыл бұрын
Where is the Sony, Nak, Onkyo from the 80-90's. Seems only Accuphase has survived. Beautiful looking pieces.
@SkyFiAudio
Жыл бұрын
Sony is still alive and kicking. In this decade they released the fabulous HAP-Z1 streamer.
@m.b.5565
Жыл бұрын
Love seeing the inside of this expensive high quality stuff.. 👌🏿 but isn‘t it kinda harmful long-term if you put your fingerprints on all the electronics inside? Maybe the fat from the fingerprints burn in over time?
@davidmorgen4558
Жыл бұрын
Whats your experience benn with H.K. Separetes such as the Citation series?
@WXSTANG
Жыл бұрын
Incredible set!!! $25K! WOW!!! Weight is because of the transformers and heatsinks. Higher wattage units use VERY large transformers because you need them for legitimate power output... unless it is class D.
@SkyFiAudio
Жыл бұрын
Link in the comments.
@glennishammont7414
7 ай бұрын
Does anyone know, did Sony ever made an amplifier with an integrated DAC !?
@victorvaldes9238
Жыл бұрын
Awesome pieces of Audio equipment, thanks for the nice easy explanation, so easy to understand. What brand are those fancy screwdriver set? They look amazing! Thumbs up 👍 !
@SkyFiAudio
Жыл бұрын
Amazon!
@albertcalderon3421
Жыл бұрын
Saludos, excelentes vídeos, gracias por compartirlos, sigan adelante, abrazos desde Bogotá, Colombia
@SkyFiAudio
Жыл бұрын
Muchas gracias Albert. Abrazos..
@b0d0p33t3rs
Жыл бұрын
How about the N90ES? Had for about twenty years, still looking for a good pre-amp for it.
@antitrustnomonopoly8291
Жыл бұрын
I purchased Graaf 13.5 about twenty years ago (Sovtek tubes, Nichicon Black Gates caps). Krell class A monoblocks + Maggies was my stereo setup at the time. Can't recommend tube gear to anyone today but I am still using Graaf preamp.
@MrPentur
Жыл бұрын
I have N90ES with E90ES Preamp. Before I was try many other amplifier with N90ES and I get good result with E90ES. This series made from 1995, before then TA-E1 and N1 but they have technically same engineering back round. For example N90ES and N1 using same gold transistors. also other many things are similar design. I made for my devices recap operation for for all capacitors and use for main supply same like N1, dual 22000uf Nichicon KG Super Through capacitors. also I replaced all carbon resistors with takman and amtrans, also all solder are resoldering with mudorf supreme silver gold solder. after revision sound amazing and I am not thinging to sell this devices never.
@brainache555
Жыл бұрын
Hello! How can I buy those screwdrivers with holes in the handle?
@TwistedCreations1980
3 ай бұрын
It wasn't their final "masterpiece" it was an statement piece. It was to promote sacd . As Sony came on market with the first sacd player that was accompanied with that set up and the speakers (vifa ,seas) driven. The scd777es was the same transport as the scd1 with the only difference no balanced. Sony made tons of amazing gear , the tan-90es and ta-e90es, the list never ends. The scd1 and 777es are outdated by now DAC wise and definitely transport wise (super slow reading dual laser transport) It's an incredible set up the ta-n 1 ,but seen today's asking of roughly 24k for just the pre and amp Puts it in a price bracket with way to much competition that will match it for less of not best it on a technical level.
@damaster692
Жыл бұрын
*saw two of these up for sale a few years ago now forgot what they were going for but it wasn't that much, I think under 15k for both, after a few videos on it the price jumped up hard and now they will cost you a good penny, the colors led light build quality are amazing, in a way its good that they aren't sought after that much but it also means that they probably didn't sell as many to keep the resell price low, they are a nice collectors item*
@tee-jaythestereo-bargainph2120
Жыл бұрын
I was wrong about Vfets but hey Mosphete amps are Rare these day . This unit is a beast and looks bran new From the video . Thanks for the share someone going to love this in their living room . The aluminum covers are for Sonys Priotary Op-Amps?
@SkyFiAudio
Жыл бұрын
I think so. some sort of proprietary circuit. I couldn't get a look at it from any angle unfortunately.
@arfer1470
Жыл бұрын
Love these deep dives, great stuff 👍
@SkyFiAudio
Жыл бұрын
Glad you like them! Let me know if you see anything in the shop youd like to see a deep dive on.
@h0ll0wm9n
Жыл бұрын
"Not For Sale" (pre-amp) and no S/N on amp. They are HOT items ;) HiFiEngine has the full schematics and Serv Mans -- the Vintage Knob output trans description is partially incorrect. Sony and other high-end manufs have not really been innovating topologically by this point. VFET and better quality TO-3 BJT's were by this date (late 1990s) not incorporated. Sony and others did make them look pretty and other HQ strategies (thick chassis, nice caps, big xformer, etc) could only go so far. The bottom line is the output transistors, and the best Sony could do -- even for only 100 units -- was to use in-production devices that are sonically "meh" unspectacular.
@dilbyjones
Жыл бұрын
Just think alot off this channel really appreciate the videos. 👏 kudos
@SkyFiAudio
Жыл бұрын
Glad you enjoyed it Tex. Stay in touch.
@32toddv
Жыл бұрын
Built like a tank!
@henriksrensen3220
Жыл бұрын
Capacitor bank not that big?
@peterc3143
Жыл бұрын
I wonder how the TA-N1 compares to the TA-NR10?
@henriknymand7259
11 ай бұрын
If you stop by with a pair of TA-NR10 I’ll let you know! 😉 I’m serious looking for a pair of TA-NR10’s. Due to bad auction sites I have missed the chance three times. But hopefully I’ll be lucky next time! But I do own 3 pairs of TA-E1/TA-N1 combos 😊
Пікірлер: 280