I was banging my head wondering how I'd get four AES outputs from the A20-RX to the 833 or 888 if the only AES input is XLR 1. Then I realized you mentioned the SL-2 not only makes everything cable-less from the RX to the 888 but it also provides a pure digital path to the recorder. That's brilliant! Thanks again for the overview and lesson.
@wandilek.9874
2 жыл бұрын
Curtis Judd you are a blessing to me. I couldn't afford to enrol for a sound course, I've just been learned a lot from you. Thank you very much for being so kind and caring 😊 I hope soon you'll teach us how to send channels to the director, producer, client on set, setting a private line between yourself, boom operator and sound utility.
@curtisjudd
2 жыл бұрын
Thanks Wandile.
@oumadennieokuku9733
10 ай бұрын
Great job O.D.O AUDIO Uganda
@andrewp1513
2 жыл бұрын
Thanks for the answer Curtis. The dialogue recording I have is from a spoken word/music performance livestream. Mic one goes into an analogue mixing board, and the mixer main L & R outs go into the Panasonic GH4/YAGH audio unit. I’m not sure how much of a stereo image makes it to the zoom meeting, and I’ve always wondered if I need both L and R outputs of the mixer to go to the camera, especially in regards to dialogue. However, it’s a cheap yet robust setup that’s working well. Thanks again Curtis
@curtisjudd
2 жыл бұрын
For spoken word, I'd stick with mono. Thanks for the question, Andrew!
@andrewp1513
2 жыл бұрын
Thanks Curtis
@jasonarvizu5296
2 жыл бұрын
Phenomenal job, Casey! Means a lot for you to take the time to help others in the community. THANK YOU!
@curtisjudd
2 жыл бұрын
Thanks, Jason.
@loui425
4 ай бұрын
Hi curtis, I know you touch on it towards the start of this video but where do you recommend your LR mix hitting on the meters for a live broadcast mix of speech (3 or 4 stick mics)? Average around -18dBFS peaking at -10 or peaking at -18dBFS?
@dnz8000
2 жыл бұрын
Thanks for another great video, Curtis! I just got the 833 and are having trouble getting sound from usb input in the headphones. Any videos or articles on how to use it as an USB interface?
@allthefonts
16 күн бұрын
Curtis reminds me of Joe Beachy
@mathewcoulliette2233
10 ай бұрын
Hi Curtis, Hope you are well. Hope you are enjoying your 888. I have been reading the manual for the 833. I was wondering if you would be so kind as to explain what “Bus Sends on Faders” means. I have not heard anyone on KZitem explain it. Thanks Mathew
@curtisjudd
10 ай бұрын
Hi Matthew, that's for sending audio to another bus and controlling the level at which it is sent, if I understand it correctly.
@mathewcoulliette2233
10 ай бұрын
@@curtisjudd why would I need to send audio from 1 bus to another bus?
@curtisjudd
10 ай бұрын
@@mathewcoulliette2233 to make multiple custom mixes for different people either on set or in post production.
@miguelsotto-mayor7325
2 жыл бұрын
Thank you for the video. You made it exactly in the right moment for me. My 888 and SL-2 will arrive tomorrow, hopefully. 😊 I also use IKEA Ladda batteries and tried rechargeable lithium, but had problems with that because I was not able to see when they die. I tried with my wisy and G4 transmitters and suddenly without warning they stop working. Have you had the same experience? What brand of lithium batteries are you using? Thanks!
@curtisjudd
2 жыл бұрын
I just bought a set of Lankoo AA Li-Ion rechargeables. Yes, every battery chemistry works a little differently. Ideally, the device needs to be configured to know which chemistry it is working with. Not all devices support that.
@hengung5891
Жыл бұрын
I'm interested in sound for film and tv. Is the 833 enough for most productions or should I be looking into the 888? Thanks in advance!
@curtisjudd
Жыл бұрын
That depends on the types of productions you plan to work. The 888 is much bigger and heavier - I usually have it on a cart. It would be quite a lot to carry in a bag all day. Also, it depends on how many inputs and outputs you need.
@mathewcoulliette2233
11 ай бұрын
Hi Curtis, How are you? I think I know what my Ultimate Audio Setup is! I want a Sound Devices 888 with the A-20-Nexus attached to it. I want (6) A-20-Tx Transmitters with Sanken COS-11D Omni Lavalier Microphones and acessories. I would also have a Mixpre-10 II in a bag for Bag-Drops or Hooking it up to Church or DJ sound mixing boards. Do you still have your Learning Light and Sound website? I would love to buy a course from you on the Sound Devices 888 mixer/recorder. I would also buy a course from you for the A-20-Nexus. Let me know if you make either of those; otherwise, have fun and take care! Mathew A Coulliette
@curtisjudd
11 ай бұрын
Hi Matthew, sounds like a really nice kit! I do not have any courses on the Sound Devices 8xx series or the Nexus, unfortunately. Have fun and make some great sound!
Пікірлер: 22