Excellent. Quick and easy... Excelente, rápido y fácil...
@jayeshsounds1499
2 жыл бұрын
Using form 2016👍🏻
@cpmfw
10 жыл бұрын
where can i get those soundcraft shirts?
@johntaylor6947
2 жыл бұрын
How can I adjust the gain and eq from mix one which is feeding my online stream and not affect front house
@gtrwndr87
5 жыл бұрын
I can't seem to find an answer to how to mix for stereo monitors such as IEMs or for a stereo feed to a live stream. I know to set the mix bus width to stereo but output patching to two outputs sums to a mono signal. Is there a way to get true stereo separation from a single mix bus?
@danielterrones4732
3 жыл бұрын
Hola no tengo stage box solo tengo dos consolas impac como es la conexión entre ellas por medio de Madi para ocupar una consola maestra y otra esclava . Gracias y saludos
@mircearaileanu6102
2 жыл бұрын
Hy How can i send on monitor a difrent eq than on main output? Tks
@flyingcows547
6 жыл бұрын
So this essentially does for floor wedges, what avioms do for in ears? Allowing you to adjust the volume levels of different channels? Neat. What about EQ'ing the signal itself that goes to the wedges or avioms? Like, if a drummer wants more low end from the kick in their ears, can you do that? Like, EQ each channel that goes to their ears, seperately from the EQ's that are set for the sound out in the house?
@flyingcows547
6 жыл бұрын
Im somewhat of a sound noob but trying to learn on this board. Thanks!
@NickLandess
6 жыл бұрын
hey! a question to which i know the answer! Each output on the expression series has its own 32 band EQ. You *can't* eq the individual elements of a monitor mix seperately from the rest of the outputs (i.e, if you eq the kick drum channel, that eq will apply to all mixes to which you are sending that channel), but you *can* separately eq the entire mix that the drummer is hearing in his wedge to bring up the bass frequencies, independently of other monitor mixes and mains. With an output mix (mix, matrix, main) master out selected, press the GEQ Hi or low buttons, and you get access to the corresponding 16 bands of eq for that output.
@thewatcher611
5 жыл бұрын
@@NickLandess Or you can select that outputs main fader, and adjust the para EQ on the channel strip.
@KevinStCroix
9 жыл бұрын
While I understand the concepts of mixing, sub mixing, monitoring- I have yet to see a demo of this board that is comprehensive. Since it is a bit unconventional, there should be a bit more pragmatic approach to what is going on under the hood, i.e.., how did you send the mix 1 to a physical monitor and mix 2 to an output on the board? You would probably save yourself a bunch of tech support calls since this is not the common sense you make it out to be.
@Typhoon792
9 жыл бұрын
Kevin St Croix Precisely.
@inthefade
8 жыл бұрын
+Kevin St Croix I just set up a system for a new venue that had bought this mixer. The guy who sold it to them had to give me a 1-hour lesson on the basics, and I still don't understand it completely. But now the venue has to hire me to either do the sound for them all the time, or train all of their technicians on how to use it. Kind of a nice cottage industry for me! But yes, it is very counter-intuitive if you're used to a regular analog board.
@66Alf66
3 жыл бұрын
I am trying to send a mix to vmix for online mix. However I can only send each channel individually. Any suggestions?
@hensleyratsizaonen8243
5 жыл бұрын
Where is the effects for monitors on si expression 2 ?
@usrite1535
7 жыл бұрын
So to send FX signals to mix 1 I have to send the FX SENDS fader to mix 1 ?? And not the stereo return channels that are feeded by the FX ?? I was on a gig with that board with lots of musicians and very little time and I couldn't send this f**g fx to mixes. I see the stereo faders but each time I selected mix1 the ones with LX return on them greyed... And I just can't reassign thoses LX returns to any other faders... Not so flexible.
@benjuminfranklin
6 жыл бұрын
Right? Why has nobody covered this?! So frustrating why I can't simply learn to send FX to a mix!
@fabianrasti8115
2 жыл бұрын
You have to send the stereo effect return channel to the monitors if you want the musicians to hear the effects in their wedge --> not the send. This isn't explained well in this video.
@jthunderbass1
3 жыл бұрын
I tried using this board for doing monitors for the best band in town. Never gain. With all the constant malfunctioning equipment and the FOH guy only giving me 5 seconds per channel to get 6 monitor mixes going with no que wedge. NEVER AGAIN. Plus the drummer didn't like what the kick sounded like in his monitor and I had no way of knowing what it sounded like with no que wedge.
@johnlamme4608
5 жыл бұрын
How can i send an fx to lets say mix1 for monitoring, but NOT to the house mix? Every time I send a reverb to the monitor mix, I also get this on my house mix.
@wimschaap4996
5 жыл бұрын
Gaat je volgens mij niet lukken alleen naar de monitor.
@andrewjoseph9187
4 жыл бұрын
take it out of the main house by pressing LR main button on the channel
@MrSmartInventor
7 жыл бұрын
How I can learn it if you are speaking so fast and quality of video is poor.
Пікірлер: 25