I'm in school for sound design and we're learning to use the expression for a live sound final, this tutorial helped me. You have a real talent for teaching, very patient and knowledgable. Thank you for positing.
@GLBProductions
7 жыл бұрын
Great to hear that, thanks for watching! All the best for your course.
@raidenpatrick3278
3 жыл бұрын
I know im asking the wrong place but does someone know a tool to log back into an instagram account?? I was dumb forgot the login password. I love any tips you can give me
@arthurbronson1038
3 жыл бұрын
@Raiden Patrick instablaster ;)
@raidenpatrick3278
3 жыл бұрын
@Arthur Bronson I really appreciate your reply. I found the site thru google and I'm waiting for the hacking stuff now. I see it takes a while so I will get back to you later with my results.
@raidenpatrick3278
3 жыл бұрын
@Arthur Bronson It did the trick and I now got access to my account again. I am so happy! Thanks so much, you saved my account !
@cyprianstoute6441
7 жыл бұрын
I've made the switch from analog to digital and with your assistance it was simple and easy. Thank you for sharing your knowledge.
@HuDunIt1010
6 ай бұрын
Thanks for this series of videos brother. They are very helpful. Your patient teaching style, cadence of speech and ability to simplify complex ideas makes it a pleasure to learn from you. Thanks again!
@GLBProductions
6 ай бұрын
You're welcome David, and thank you for watching 😊
@randallpatrickc
8 жыл бұрын
I think this series will become the standard Si tutorial - SO good! Very clear. Great job.
@GLBProductions
8 жыл бұрын
Thanks for watching Patrick, really appreciate your support!
@isoceles1
4 жыл бұрын
Very good direction and instruction, the big problem is the camera person was not able to follow the lead of the instructor. Many times the instructor referred to faders or knobs, and the camera did not focus on where he was referencing. Otherwise, the instructor did an excellent job of explaining and describing the functionality of each component.
@GLBProductions
4 жыл бұрын
Yes the camera work is not ideal, but remember that you are getting the video for free ;)
@bumbusoundserviecejhiljhil8349
5 жыл бұрын
You're a wonderful teacher, I enjoy all your videos
@GLBProductions
5 жыл бұрын
Thanks for watching :)
@trocvailima6159
5 жыл бұрын
You are by FAR the best ... so easy to understand. Thanks from Samoa
@GLBProductions
5 жыл бұрын
Thanks for watching!
@DavidSalahi
5 жыл бұрын
Thanks so much! I'm coming from a similar situation-an analog mixer which I understood pretty well to an Si Expression which I understand poorly. This is a great start to get me going!!
@GLBProductions
5 жыл бұрын
You're welcome! If you find you are having trouble understanding the digital mixer don't be afraid to arrange for training from the person who sold it to you - training is much better done in person than over the internet ;)
@MalinowyWampir
3 жыл бұрын
I would like to be in your classroom lessons, have such a teacher like you :D
@pangzter
8 жыл бұрын
that was ultra informative mr luse! nice work by the camera guy too keeping it steady for over 24 minutes! looking forward to the 2nd instalment.
@GLBProductions
8 жыл бұрын
Camera woman actually ;) Yes she did a good job, thanks for watching!
@samuelsithole2569
8 жыл бұрын
thank's sir for empowering use as sound engineers
@GLBProductions
8 жыл бұрын
You're welcome!
@utpalsaha5540
4 жыл бұрын
Love you sir, I like your teaching style very much.
@GLBProductions
4 жыл бұрын
Thanks Utpal!
@utpalsaha5540
4 жыл бұрын
Most welcome sir
@thomaskapica4742
8 жыл бұрын
Am just waiting for part. 2!!!
@GLBProductions
8 жыл бұрын
Thanks for your support Thomas :) These videos take a very long time to edit but the next part should be up in a week or so!
@dinhquach9373
4 жыл бұрын
Hello there sir That was an awesome tutorial lesson please have more of this specially covering how to save setting from one to another or how save as a new profile please please
@GLBProductions
4 жыл бұрын
Thanks for watching Dinh! This series is complete and there will not be any further videos added.
@AcidZambies
3 жыл бұрын
Excellent Teacher
@GLBProductions
3 жыл бұрын
Thanks Austin!
@gamazu18
3 жыл бұрын
very well explain ed and helpful channel
@GLBProductions
3 жыл бұрын
Thanks Govind.
@kierrajones3952
8 ай бұрын
Thank you!!!!!!!!!!! This rocks!!!!!!
@GLBProductions
8 ай бұрын
You're welcome Kierra :)
@djabthrash
6 жыл бұрын
"your iphone with death metal music on it... alright ?" haha
@Gkh_lx
8 жыл бұрын
fantastic and informative as usual!
@GLBProductions
8 жыл бұрын
Thanks for watching Guy!
@miracletualaina9559
4 жыл бұрын
Nice teaching..
@GLBProductions
4 жыл бұрын
Thanks Tuala.
@UrbaNSpiel
Жыл бұрын
Nice
@wimschaap4996
7 жыл бұрын
hey thank you we will also buy a soundcraft (we have a yamaha 166 usb) and play your video's a lot.
@GLBProductions
7 жыл бұрын
You're most welcome.
@izziOnBass
6 жыл бұрын
10:28 Master - "if you have too much gain what happens? " . . . Warrior - "too loud" LOL!
@Acoustic_Theory
5 жыл бұрын
Or clipping, which is worse.
@ROCKBanyuwangiChurch
6 жыл бұрын
Thank you. GBu
@МаксимШумейко
5 жыл бұрын
Thank you!
@Acoustic_Theory
5 жыл бұрын
Funny enough, I have the Yamaha mixer (MG12, same as shown), and I'm examining a switch to the Expression 1.
@GLBProductions
5 жыл бұрын
At this price point also consider the Allen and Heath Qu16.
@tommyi2556
5 жыл бұрын
Ok Good! 😂 Thank you so much! This tutorial is really helpful! Too bad I just found it.
@GLBProductions
5 жыл бұрын
Better late than never ;)
@baluadhe7521
6 жыл бұрын
please make tutorial of soundcraft signature 16
@jouebien
8 жыл бұрын
that was cool. The only thing I didn't like where the ghetto hardware store rack bolts and the metal washers being used on the mixers rack wings. XD The correct style washers (plastic or material) and bolts are cheep as chips. Looking forward to part 2.
@GLBProductions
8 жыл бұрын
I'll let our installer know that you don't approve of his choice of hardware ;)
@jouebien
8 жыл бұрын
It's in a rode case that is designed to be moved around - you go punting in metal washers and your going to scratch up the rack wings. Scratches lead to rust and rust leads to a premature electronics failure which leads to hate and hate well leads to the dark side! All joking aside. Using incorrect rack bolts is also not a good idea either. The rack it's in might fall over, be stored length ways in a truck and transported to another venue or in general not looked after properly (as is the case with most churches who aren't employing someone who knows what they are doing) - you skim on the bolts holding the mixer in and you won't have a mixer when it comes loose in transit.
@camperoosg8056
5 жыл бұрын
What about the master fader? That action comes before the gain and fader and adjustments..
@GLBProductions
5 жыл бұрын
Master fader should be placed at 0dB most of the time. However remember that its position does not affect the gain-setting operation as that is done pre-fader.
@Gkh_lx
8 жыл бұрын
I have that Yamaha desk, lol
@GLBProductions
8 жыл бұрын
Yes they're pretty ubiquitous in this part of the world :)
@3drdesign29
3 жыл бұрын
Hello Sir, we canoot connect LR inputs, our mixer works only with MONO, can you help us?
@GLBProductions
3 жыл бұрын
More details please Andrei.
@joseksimon
11 ай бұрын
Hello.. I have expression 2 in my Church. I have a question. I don't want the effects to go to my 2 monitors which are connected through mix 5 and Mix 7. Effects are already coming out through main in house speaks. I want to control it in selected monitors
@GLBProductions
11 ай бұрын
So you would press Mix 5, locate the aux return faders (blue faderglow) on the appropriate layer) and make sure they are all the way down. Then repeat this for mix 7.
@joseksimon
11 ай бұрын
@@GLBProductions Thank you so much for your advice. Will try it out this weekednd
@joseksimon
11 ай бұрын
I tried it out and it worked.. Thank you so much🙏🙏
@GLBProductions
11 ай бұрын
Wonderful! All the best with your music ministry 😄
@peteryousef5177
Жыл бұрын
hello, please we need a video how to use soundcraft vi3000 ?
@GLBProductions
Жыл бұрын
Thanks for the suggestion :)
@frankservant5754
2 жыл бұрын
How much gain should you use for a live church setting, isn't 2 oclock too much
@GLBProductions
2 жыл бұрын
The amount of gain needed is related to the level of the incoming signal - lower level signals need more, higher level signals need less. Likewise what is too much or too little gain depends on whether or not the signal has been raised to line level - there is no 'correct' or 'standard' amount of gain for any given channel.
@randallpatrickc
8 жыл бұрын
I can get an aux mix out fine but am having trouble with sending the L/R mix to a Matrix. I think my problem is in the LCD window screen (with the XLR sockets and check marks). I can headphone monitor the MTX ok but bugger all comes out the two XLR outs I assign. The manual is a bit sparse here - can you step me through how to assign Outs to a MTX mix please? Would be eternally grateful!
@GLBProductions
8 жыл бұрын
Hi Randall, I don't have the mixer in front of me at the moment, but working from memory, the procedure is to press one of the matrix bus buttons eg MTX1, MTX2 etc and then go to the appropriate fader layer in order to determine what is sent to that matrix. You then need to go to the appropriate page on the touchscreen to set up which physical outputs you want to patch that matrix to. You're right that the mixer is really not helpful in this area. If you can monitor the matrix in the headphones but get no physical output then double check your patching and especially check easy to miss things like having the master fader up and switched ON - this one gets me all the time! This is an interesting issue so I will confirm these directions the next time I'm around this particular mixer.
@trucchinh563
8 жыл бұрын
I wanna upgrade my analog mixer to Si for my Choir but I see many people selling Soundcraft Si Expression with excellent condition that used in Church. You have been using this mixer so can you share your experiment? thanks
@GLBProductions
8 жыл бұрын
I suggest you watch the entire series of videos and then make a decision.
@dennisneuhaus2607
8 жыл бұрын
Minor question in your sequence list. Making connects should come before powering up the system, is this correct? Even in established systems, any new connects need to be done before powering up the system, am I correct in this train of thought?
@GLBProductions
8 жыл бұрын
Yes Dennis in an ideal world all connections should be made/broken with the power off. However if the system is already on when you arrive, check that the channel you are connecting to is muted and that the phantom power is turned off.
@dennisneuhaus2607
8 жыл бұрын
Thanks.
@GLBProductions
8 жыл бұрын
Dennis Neuhaus You're welcome :)
@carlotheatheist
2 жыл бұрын
what if i want a soundcraft ui series connected soundcraft si expression 1? how do i do that. i saw a data lan port on both mixers. but I'm confuse how do i link my ui to si mixer? my plan is to use the ui series 16 as my voice mixer channel for the singers , backup singers, for the host and master of ceremony. Then the my main mixer soundcraft si expression will be my instruments channel , pc Spotify player and karaoke player. how do i all do that?
@GLBProductions
2 жыл бұрын
If you want to use the network ports to connect these mixers you need to contact soundcraft to determine the correct protocol to use. Otherwise you can connect them as you would normal analog mixers.
@carlotheatheist
Жыл бұрын
@@GLBProductions but for 2 ui mixer. can they be combined together??
@jambam6176
2 жыл бұрын
I'm thinking about purchasing a Si Expression... Has this mixer given you any problems?
@GLBProductions
2 жыл бұрын
The mixer in the video is still in use and hasn't given us any major problems.
@aanandkumar3097
6 жыл бұрын
What happens if I connect the Digital Audio Output from a Digital LED- TV to the AUX Input of an old Yamaha Analogue Amplifier?
@GLBProductions
6 жыл бұрын
You'll probably just get a bunch of noise as a digital output is not compatible with an analog input.
@KoinoniaWorshipExperience-j4d
8 жыл бұрын
please i want to know if GLB productions has an institution for Audio Engineering
@GLBProductions
8 жыл бұрын
Yes it's right here on KZitem! There's no brick and mortar institution, I do all of my training at the school, club or church that hires me.
@ernesthowell6052
7 жыл бұрын
GLB Productions b
@joashimself6629
8 жыл бұрын
...your iphone with death metal music on it - hahahah - in the church
@GLBProductions
8 жыл бұрын
Glad you dug the irony ;)
@giesi1997
8 жыл бұрын
Hey Bruno, I have got a question to you as you are quite familiar with teaching Sound-Engineering. In my local church we are only four people in the "sound-team" so its really hard to get someone for every service. As the inofficial leader of the team I am responsible for training any newcomers. Sadly I have no Idea where to start when these guys have no Idea about sound reinforcement so far and are supposed to handle our Qu24 any time soon. Do you have some kind of concept for a training session? I guess it would be easy to teach them an easy procedure, but I don´t feel that is the right way. I want them to know how things work and how to react, when unexpected things happen.
@GLBProductions
8 жыл бұрын
Hello Joni thanks for getting in touch. Are you looking for training specifically on the Qu24 or on doing sound in general?
@giesi1997
8 жыл бұрын
Well, both ;) Our technicians should know how Soundreinforcement works, but after all they should be able handle our setup (i guess thats the point of the whole story)
@GLBProductions
8 жыл бұрын
Yes that is the correct approach! Ok I have just the video for you, stay tuned!
@GLBProductions
8 жыл бұрын
Hello Joni, this video is for you: kzitem.info/news/bejne/lmqO2WqHfIeFiqw Thanks for your comment, this video should have been made a long time ago but sometimes it takes viewer input to get the ball rolling :)
@giesi1997
8 жыл бұрын
Oh wow, I didn´t see that one coming. Thank you very much for all the effort put into that video. It will help a lot. I guess the only challenge left is to find people interested in joining our team ;)
@jakeblue8506
4 жыл бұрын
all i want to know is the sound diffrent from analog to dig
@GLBProductions
4 жыл бұрын
The sound is different, but not in a bad way. You can produce great results on both.
@subhajyoti3106
4 жыл бұрын
hlw sir I'm from India , can u tell me what's the difference between of si expression 1 vs si performer 1
@GLBProductions
4 жыл бұрын
The main difference is that the Si performer has a built in DMX lighting controller.
@richardfernandez1198
7 жыл бұрын
how to recording to usb in soundcraft compac 32
@dinatigeleiro1629
2 жыл бұрын
I have no experience with this, and I recently took over a position where I have to use this in a planetarium. The wireless microphone we have set up to it was working, and we accidently pressed some buttons, and now we have no sound with the microphone. Would you be willing to assist?
@GLBProductions
2 жыл бұрын
More details please.
@waveentertainer9393
Жыл бұрын
Tell me 20 channel fider not go up when I am push fider up the down why sir tell me reason
@GLBProductions
Жыл бұрын
The fader motor may have become faulty.
@vivekdjbalotra9750
3 жыл бұрын
Price
@GLBProductions
3 жыл бұрын
Sorry I don't sell equipment.
@42698
7 жыл бұрын
mixer does have problems that no teacher
@Christ_is_a_blackman100
5 жыл бұрын
How do you label the channels?
@GLBProductions
5 жыл бұрын
White tape and sharpie.
@Christ_is_a_blackman100
5 жыл бұрын
@@GLBProductions ok thanks! Its really like an analog board!
Пікірлер: 115