'Download & Play' kits for SP1200/MPC now from TONELAB! tonelab.merchi.co/products
@fugitivemelbz
2 жыл бұрын
Better picture quality than the new Spider Man movie
@BTHECROWN1
2 жыл бұрын
Thanks for the knowledge
@tonelabqt
2 жыл бұрын
No problem 🙏🏻
@chap2065
Жыл бұрын
Just got 6 of the SP1200 sample packs, thank you! 🙏 You are a true expert teacher. Is there any truth to re-sampling by going sp1200 out then back into sample input? Just wondering. Thx again for such a high level of quality always. :-)
@tonelabqt
Жыл бұрын
Thanks for the kind words 🙏🏻 well, you can't Sample directly from the Output, you'd have to record it to a DAW etc first. Plus, it sorta depends what Sound you're going for.. the effect of re-sampling might be cool on certain things, while not others. It'd definitely add some extra SP saturation though 👍🏼
@frankjamesbonarrigo7162
8 ай бұрын
Why is the new copy cutting off the other? Because they are assigned to the same output?
@tonelabqt
8 ай бұрын
Same Channel Assignment, yep 👍🏼
@JamBurglar
Жыл бұрын
Using the Rossum, I had a hard time following the disc swap aspect of this video and couldn't figure out how to get that to work. I WAS able to copy sounds without using the disc swap. I believe I just copied the existing sound to a new pad, and then loaded the sound to that same pad, which allowed me to independently truncate that new sound. Is the disc swap technic important only if you're low on space? If so, that would seem less important on the Rossum due to the extra 10 seconds. Or maybe I'm missing something all together.
@tonelabqt
Жыл бұрын
So, the best way I can explain it is.. if you run the COPY function.. it doesn't create a COPY you can TRUNCATE, it just puts a 'link' to the first PAD/Sound that you copied. The Disk-swap technique, allows you to LOAD the SOUND back in so you, then, have a Copy you can Truncate 👍🏼
@JamBurglar
Жыл бұрын
@@tonelabqt I seem to able to do this on the Rossum WITHOUT any disc swap. I'll try to jot down a step-by-step this weekend.
@robertcrystals
Ай бұрын
Can you copy a sample to a new pad and delete the original? I swear it's how I used to do it to just move samples, but can't check atm.
@tonelabqt
Ай бұрын
You can copy sounds.. but you can't edit the copy as the copy refers to the original, however, in saying that.. if you delete the original.. the 'copy' then becomes 'editable' as it's no longer a 'copy' 👍🏼
@robertcrystals
Ай бұрын
@@tonelabqt Thought so! yeah, when you load up your samples and want to make space, this is what i'd do. Tried it tonight and it worked.
@frankjamesbonarrigo7162
8 ай бұрын
How would I take a hi hat from your 808 sample pack on B5 and copy it to D5? But have D5 editable? I tried, I basically deleted all the other sounds on the 808 pack but B5. Saved it to scratch.hfe, then copied B5 to D5. Then loaded B5 back onto itself. The copy isn’t being loaded. it’s just the link to B5 is being broken.
@tonelabqt
8 ай бұрын
It's sorta the other way round. Save D5 to it's own Disk/Image. Load the 808 kit up, via Disk Module option #5. Then load D5 off the 'scratch' Disk/Image, via Disk Module option #6 👍🏻
@frankjamesbonarrigo7162
8 ай бұрын
@@tonelabqtI should have put it differently, it’s so simple , you are breaking the link when you copy a sound and then use option 6, so I copy B5 to D5 , if I load B5 again with option 6 I can edit D5.
@frankjamesbonarrigo7162
8 ай бұрын
@@tonelabqtconfusing is the load D5 part. How do I save just D5 to a scratch disk, there is no save sound option, only sounds. So I would have to delete the whole 808 sample pack to save D5 alone to the scratch disk right?
@tonelabqt
7 ай бұрын
That's right.. the only way of 'solidifying' the copy is to delete the original. If it's 'linked' you can't edit it.
@tonelabqt
7 ай бұрын
If you delete the original, in your case B5.. D5 will become 'solidified', as such. Then, 'Save' the entire kit to a scratch Disk/Image.. then load D5, off the scratch disk, via option #6 into a new project 👍🏻
@blakghost2023
9 ай бұрын
Today's generation will never understand
@mpmi7588
2 жыл бұрын
this work flow is horrible. lol. Thanks for the tips
@tonelabqt
2 жыл бұрын
Cheers mate 🙏🏻 yeah, I gotta agree with you.. it's not ideal, but in defense of ol' Bertha... it is from 1986.. not a lot at that time had anything by todays standards, but.. even this little trick, as modest as it is.. can be a life saver in some situations 🤓
@da357banger
2 жыл бұрын
I saw a guy on youtube record his sample, saved it, copy it to another pad, delete the original sample and load it back up. Would that work?
@Arc.hitectureMusic
13 күн бұрын
The SP12 Turbo was infinitely worse. 5-10 minute load time for 5 seconds of samples
@tonelab
2 жыл бұрын
Watch the big clip here on Tonelab kzitem.info/news/bejne/2G17vopvm3l1en4
Пікірлер: 26