had to put a decomp in my 99cc build broke the rope 3 times trying to start it without it....had to use a base gasket on that one no clearance without it...my cases had to be opened up alot to accept the 56mm piston,but i was using an old set of flat top cases and crank....
@retiredwelder
4 жыл бұрын
Hey IRONHORSE. Sorry I haven’t been on much. My dads not doing well. I think his mind is starting to go 😢. It’s very depressing seeing my hero start to go downhill. Anyways I missed watching your videos. I gotta get caught back up. Take care buddy. Love you guys.
@tazman-kennyfuller
4 жыл бұрын
Great to see you fellas in the shop. I love the greenhouse but there is just something better about seeing you two in the saw shop. Love it Ironhorse 🌲❤🌲✊
@chadherron2045
4 жыл бұрын
Love the videos I recently acquired a 98 Husqvarna 365 and wondering if they any good and what I can do to make it better and where to find good parts for it on a tight budget
@jamiedalluge9472
4 жыл бұрын
If it's a non xtorq it's really good and even a xtorq is ok. They take very well to a good porting job and exhaust opened up
@g-man4647
4 жыл бұрын
Thank you Harvey and Cullen for coming back to the saw house. Lol. I loved the information today and keep up the great work. Have a great day guys. Peace out ✌️
@robertramsden9733
4 жыл бұрын
Thanks Harvey I really appreciate it / good information on Both videos today I still wanna keep learning from you as well 👍
@vtecpowersaw1577
4 жыл бұрын
Hi iron horse what a sight for sore eyes you holding a piston when i woke up dismorning
@lorenzonelli3322
Жыл бұрын
Hello. Ironhorse. Is It possibile mount the 372 XP flywheel on the holzzforma 372 xtorq type? My saw doesn't start, even if i have spark, fuel and compression, with no skars on piston and cylinder.
@Thetreefella
4 жыл бұрын
Saw house 💛🖤💛🖤💛🖤👊👍💚🌳💚
@kens.3729
4 жыл бұрын
You didn’t Miss us half as Much as We Missed you, Ironhorse. You didn’t skip a beat. 😬 👍
@inmotion81
4 жыл бұрын
You should by one them ceap saws and go crazy with it make it make alot of power make good video atleast
@BillyP-49Chevy
3 жыл бұрын
Where in Northeast? I'm in New Hampshire. Would like to port my 455 rancher. Yes, xtorq.
@stevetheriault4164
4 жыл бұрын
HII BOYS GREAT TO SEE YOU GUYS BACK IN THE GROOVE ,HOPE YOU GUYS ARE WELL AND YOUR GARDEN IS DOIN GREAT, HOPE BARB IS WELL ALSO LOVE THE SAW BUILDS ,HARVEY ARE YOU EVER GOING TO CHECK OUT THE CAVE YOU TALKED ABOUT ,YOU WERE GOING TO GET A REMOTE CONTROL VEHICLE TO GET IN THERE WOULD BE COOL TO CHECK IT OUT BE SAFE GUYS
@1944chevytruck
4 жыл бұрын
glad to see you guys are keeping busy....thanks for video! be kind.
@pm270100
4 жыл бұрын
i think you like being in the saw shop
@tomkrise4632
4 жыл бұрын
How about a video of you cutting some more trees down harv ? And some skidding to show people what those skidders can do. There a awesome machine !
@macca12
4 жыл бұрын
Great to see you boys back on deck. Keep up the good work. It would be good to get updates on the greenhoise and garden from time to time.
@benhamilton8132
4 жыл бұрын
Good to see you fellas love the videos thank you!
@maddog6493
4 жыл бұрын
speaking of covers when are you guys going to do a band practice video I really liked seeing your band ,but then again I like all your vids,,take it easy
@evankibbe590
4 жыл бұрын
Good to see you working on saws again.. it's great to see ya'll . 😊😊💝💝💥🌎🍻
@Ketis1985
4 жыл бұрын
Those 6202c3 bearings are used with alot of swedish saws from 50cc to 70cc. Saws like 346xp, 55, 254xp etc. use them. They upped the bearing size for 572xp though.
@adamfrisby7163
4 жыл бұрын
Glad to see u back in the shop harv great day!!!!!!!
@waydehamm7928
4 жыл бұрын
Glad to see you 2 in the saw house ! Luv to see your vids 👍👍 and what a great green house !!!
@michaelwhiteoldtimer7648
4 жыл бұрын
nice to see you working on saws again
@errolpoxleitner7901
4 жыл бұрын
Try making head gasket out of beer or soda can.
@davidcharles3313
4 жыл бұрын
Good to see you in the saw shop.
@bikerdog5554
4 жыл бұрын
Say see saw city at 1350 rpm. Boom
@sparker2289
4 жыл бұрын
That muffler was a joke so I could keep my stock one. I deff want one of the mufflers you built buckin
@theironhorse6600
4 жыл бұрын
You got it friend!
@kens.3729
4 жыл бұрын
I see you have the Sidekick, Cullen, on Video now. You two are the Brooks & Dunn of Saws. 😬 👍
@shahriariran44
4 жыл бұрын
Nice to see you in the shop ❤
@bobpurs
4 жыл бұрын
Good seeing you two 👍✊
@tomkrise4632
4 жыл бұрын
Loved it guys !
@bmk506
4 жыл бұрын
Harvey....how would I go about fixing a stuck choke on a rochester quadrajet carburator?? I know it's not on a saw but thought u may know....its stuck closed and floods my engine
@matthewscantland85
4 жыл бұрын
Hey mr Harvey I watch your channel and buckin and bell hopper’s also. I want to go to buckin stock one day. But I want to go there with a iron horse saw. I have a Dayton 245a with the reed valve. I think it’s a 74cc saw, I was wondering if you had time to build it. If not no problem I still enjoy your channel. Also I have a Husqvarna 61 white top I would like to put a big bore kit on and was wondering where I could get a good carburetor. If you offer a big bore kit with all I would need to build my 61 I would like to purchase one.
@Finom1
4 жыл бұрын
IRONHORSE, God Bless you for sharing your wisdom with us!!!
@Bluesbone007
4 жыл бұрын
Miss you guys too. Just sent greenhouse video to my wife, she wants one...... send me the plans, lol
@ronsilva516
4 жыл бұрын
Hay Harvey do a video gardening with a chainsaw 😂😂😂 just kidding is, glad u are Abel to do saws but this virus stuff had a positive side you got your pantry & green house done garden going in my opinion that was Moore important than saws but that’s my opinion only 👍
@bobfitch607
4 жыл бұрын
Great to see you guys back in the saw shop. Not that I didn't enjoy the greenhouse build and a little cooking tips. But you guys look better in your natural environment ✌️
@307j.o.a.t9
4 жыл бұрын
Aannnnddd hes back!!! The legend lives!!! Lol!! Great to see ya boys!! Excited for some saw builds... not that the greenhouse was bad. Love that too!!
@HiriamAbiff32
4 жыл бұрын
Awesome information! Thanks for the new video!
@d4laseck
4 жыл бұрын
Hey Harv. Glad you are back. Can you us how to build a saw that runs on leaded race fuel or nitro?
@timkelley8775
4 жыл бұрын
So glad to see you out of the garden Iron Horse That’s funny you had weeds growing in front of the door.
@mrj7872
4 жыл бұрын
Thanks for another great video looking forward to many more
@jeffc9354
4 жыл бұрын
Great video man good to see you both nice work.
@crazyman3157
4 жыл бұрын
Missed you guys! Happy to see you both again. Have a great day all. 😊👍🏻
@tttco
4 жыл бұрын
Glad to see your saw builds again!!! 😍😍
@jeffgrier8488
4 жыл бұрын
It's good to see you back at the bench working on saws, and I can tell that you're happy about it too!
@justinweaver8787
4 жыл бұрын
Glad to see that you are happy in the saw house good to see you guys. Thank you for all you do.
@woodyjade9097
4 жыл бұрын
I missed you guys out in the shop!!! So good to see you Back!!!
@jeffjohansen4945
4 жыл бұрын
Hi guys we missed you, finally got to run my Husky a little bit last weekend
@rogervandergriff1851
4 жыл бұрын
Glad to be back in the saw house with you!!!
@russellwatkins4261
4 жыл бұрын
The greenhouse is awesome. Gonna need some updates on the greenhouse
@jeffsalsbury8984
4 жыл бұрын
Miss you all. Much love and god bless!!
@l.w.petersen7359
4 жыл бұрын
Missed you too intiativ room 👍🏼
@bigjersobservations
4 жыл бұрын
Hi Ironhorse, just wanted to share something I ran into recently on aftermarket pistons that also affects squish, in addition to the cylinder or the case like you mentioned. Once for a 372xp and once for a Husqvarna 350. The distance from the top of the piston to the top of the wrist pin was .015 shorter than what I normally see. I was going nuts trying to figure out why my squish was larger than normal. Thanks for the great videos and keep up the great work.
@paytonmac5665
4 жыл бұрын
Glad to see on saws.
@tazman-kennyfuller
4 жыл бұрын
1st yeah Cullen
@cullenjdrake
4 жыл бұрын
Sorry I missed it. Was out in the saw room. Lol
@marcduclos9789
4 жыл бұрын
Yaba daba do
@vtecpowersaw1577
4 жыл бұрын
Was that hogans 200t or his little echo ?
@jameswilson322
4 жыл бұрын
Echo
@sparker2289
4 жыл бұрын
I'm so happy to see you working on my saw Harv. Go crazy as you want brother. Make it as hot as you can but reliable. I got the money. Thank you Ironhorse.
@theironhorse6600
4 жыл бұрын
Yer gonna love it!
@russellknight26
3 жыл бұрын
So will the stock cylinder off a 385xp fit on a 372x-torq or a 372xpg?
@DexterDay2
4 жыл бұрын
What was wrong with the double barrel muffler? Versus the muffler you made with the huge opening and a 90° bend? Some Piped mufflers are a tuned piped muffler where the pipes go inside the muffler, almost to back of the can. I'll buy that muffler if you and the owner think its junk. Those piped mufflers (tuned or not) can make a big difference in power.
@aaronmorgan488
4 жыл бұрын
They do not gain comp while running lol
@inmotion81
4 жыл бұрын
I agree that x torque crap is just for marketing purposes its junk it makes tha saw into a Honda civic .
Пікірлер: 72