I know I'm super late to this, but is there a way the ESP module can receive webhooks instead of send them?
@ElectroIoT
4 жыл бұрын
Great I want to trigger webhook with anather esp8266 button when I press button triggered
@kenkoknz1
6 жыл бұрын
Hi, good video, just a quick question, how do you reprogramme the wifi settings or set it back to ap mode? Thanks
@RobertCowanDIY
6 жыл бұрын
Check the description, there are links to the SparkFun tutorial, as well as the button code tutorial. Both of these show how to do that part of it. You just load a sketch, connect to the device, and that's pretty much it. Just follow the steps in those tutorials.
@MrBobWareham
4 жыл бұрын
Love your project very good but I live in the UK and your board cost £26.00 just too much money for one project
@paulrunge5843
5 жыл бұрын
Can you help me, I try to get more than one button with only one Esp, how can I do it? Please help me Great Video!
@RobertCowanDIY
5 жыл бұрын
It shouldn't be any different to add a second button. Just add another set of variables and use another GPIO pin.
@kingbrowney1018
4 жыл бұрын
How do I add another variable 😁
@smeeegheeeed1
Жыл бұрын
Brilliant, thank you for sharing
@c0r0y
6 жыл бұрын
Now that Maker is not Maker anymore but Webhooks. What is the url now? Is it still maker.ifttt.com ?
@RobertCowanDIY
6 жыл бұрын
ifttt.com/maker_webhooks
@JellyPies
5 жыл бұрын
when trying to compile i get: call of overloaded 'String(IPAddress)' is ambiguous
@eltordavis
4 жыл бұрын
i got the same thing
@dwDragon88
6 жыл бұрын
I love the electronics projects videos, looking forward to more!
@MrBobWareham
4 жыл бұрын
I wish I could get SparkFun boards in the UK
@slabs7823
4 жыл бұрын
Thanks for making this video. Each step was well explained and demonstrated. You are a good teacher!
@alexdiaz3342
6 жыл бұрын
Hi men i like your video , can you explain me how to configured my esp8266 like a wifi switch ?
@grumpazoid
5 жыл бұрын
Thanks for this. Your video enabled my to get webhooks working with Domoticz.
@samuelschuur7044
6 жыл бұрын
is more crippling depression coming?
@RobertCowanDIY
6 жыл бұрын
Yep, I'm actually editing the other two assembly videos right now. Then I will do a full teardown video showing the 'post fight analysis'. there's just only so much time in a day!
@HughesEarthworks
6 жыл бұрын
I really need to learn more about these types of projects. This was so far over my head it is embarrassing.
@RobertCowanDIY
6 жыл бұрын
If you have any questions, just let me know. You might want to start with something basic, like an Arduino, and just make some simple projects. Then move on from there.
@vkanth2
6 жыл бұрын
Superb tutorial. Many thanks indeed!
@MrCBRXX1100
6 жыл бұрын
what should I write in the last IFTT description? I have filled RUL, KEY but do not know what to write in the last one? I cannot get it to trigger:(
@switchback42
6 жыл бұрын
I am wondering the same thing about the last IFTTT description. Have you gotten yours to work yet?
@JonathanRansom
6 жыл бұрын
Nice little electronics project, I need to try out one of those Things!
@souk-tv
6 жыл бұрын
You camera quality is great
@mrp123123123
6 жыл бұрын
This makes me miss your New Product Fridays at Sparkfun. I was hoping you'd smack a widget or two on the table near the table corner, for old time's sake. Thanks for sharing the demo.
@RobertCowanDIY
6 жыл бұрын
yeah, it's been awhile since I've done one of those! maybe I'll toss one in for old time's sake ;-)
@MK-jn9uu
6 жыл бұрын
Wow.. that camera...
@dmwarnke1960
6 жыл бұрын
I'm not using a sparkfun board. I have a nodemcu v3. What terminals do I use.d0 and ground?
@RobertCowanDIY
6 жыл бұрын
I'm not familiar with that board, but just googling it shows pin-out diagrams. It looks like GPIO16 is what you want.
@dmwarnke1960
6 жыл бұрын
Thanks for the reply Robert. I finally got back to working on this.If I put D4=GPI02 to ground I get an event but no notification. When I do a serial monitor, this is what I get. Do you see anything wrong?ThanksTriggerdoor_status Event Pressed 2 times POST /trigger/door_status/with/key/Vr0w4D9nTmB1dvixxxx HTTP/1.1 Host: maker.ifttt.com User-Agent: Arduino/1.0 Accept: */* Content-Length: 61 Content-Type: application/json Connection: close {"value1":"1","value2":"192.168.1.102","value3":"419539136"}
@engrmuhammadalibaig9214
5 жыл бұрын
great bro good job
@EskimoRuler11
6 жыл бұрын
Hey Robert, cool video. Did you make that enclosure for your sonos system or modify an existing enclosure?
@JonathanRansom
6 жыл бұрын
Michael Escamilla he shows where he got the enclosure and how he modified it in this video: kzitem.info/news/bejne/maSrt5qiqWWahXY
@EskimoRuler11
6 жыл бұрын
Jonathan Ransom, I feel dumb, I should have known that. I watched that video.Thanks for info.
@JonathanRansom
6 жыл бұрын
No worries, if you're anything like me you watch a lot of KZitem videos so it's easy to forget you watched one every now and then. ;-)
@alejandrosantiago6080
6 жыл бұрын
Nice work, By any chance do you know how to send a value to the IFTTT ?? Thanks. -Alex.
@RobertCowanDIY
6 жыл бұрын
I don't think you can. You can only send an event trigger, not specific information or values.
@alejandrosantiago6080
6 жыл бұрын
Ok, thanks alot, Im still searching If i found anything will come back to let you know. Thanks!. Keep up the great videos !!!
@alejandrosantiago6080
6 жыл бұрын
Hi Robert, Turns out you can pass data on the IFTTT libraries, But bad luck for mi, the first one dont explain how, or even have some example, currently Im using one, that sends data as "value1", value2 and value3, buuuuut..... it must send in char type, Im trying to convert a float type to a char, and send it. I make the first part, or the serial monitor says. But no luck in to send a real float. I will come back with more information. If by any chance you know some magic trick to convert float to char, reach me. Thanks. -Alex.
@faxxzc
6 жыл бұрын
When are you continuing your Stratasys Dimension episode? I cant wait to see how it turned out!
@RobertCowanDIY
6 жыл бұрын
It will be coming soon. I'm going to be doing some work on it this weekend actually. I'm not sure when I'll get to putting a video together, but I'm at least getting back to it!
@faxxzc
6 жыл бұрын
Robert Cowan thank you! I can't wait!
@RobertCowanDIY
6 жыл бұрын
WELL, YOU'RE GOING TO HAVE TO WAIT! ;-)
@faxxzc
6 жыл бұрын
Robert Cowan OK! I CAN'T WAIT TO WAIT!
@faxxzc
6 жыл бұрын
Robert Cowan I'm a real fan of your work by the way, you deserve way more subscribers
Пікірлер: 48