my 99 is “pinging” thought it was ignition timing off but idles still 10° btdc, injectors recently cleaned, fuel pump is aftermarket from PO… thinking it’s not pushing the right pressure, gonna replace and check pressure soon! great video
@corybohn2013
5 ай бұрын
Driving my car and when it hits around 3,500 rpms it jumps? But no cel, what do you think?
@mrrubberducky588
Жыл бұрын
Hey mate I’ve got a nb1 and was wondering if you have had this issue before. My issue is that my nb1 bogs down from 1k rpm to 2.8k rpm and then I get fuel power after that. I drove my car for a little bit and then stopped starting, it does crank but doesn’t start. Do you think this could be a fuel pump or something else. (The timing is correct, have new leads and spark plugs also not MAF or MAP sensor) thanks 🙏 love the videos
@BennyObscene
2 жыл бұрын
Thanks, Al! Could you also post links to the pressure gauge and adapters you use?
@aracing
2 жыл бұрын
www.aliexpress.com/item/32917178470.html I believe it is this one buddy
@DarkDMD
5 ай бұрын
@a+ where did you get that adapter kit from?
@briancalderon5650
Жыл бұрын
Hey man any chance you could help me out with a diagnosis bc I changed my fuel pump but I’m having so many things after another would like an knowledgeable respond
@aracing
Жыл бұрын
Email me your number alangulo530@gmail.com
@victorescarcega4885
Ай бұрын
As soon as I shut my key off psi goes to 0 I’m guessing this is not normal
@aracing
Ай бұрын
Not really, you should have pressure even over night.
@jimmy4993
Жыл бұрын
Hey mate question. It takes 4 primes before miata starts and drives fine. I'm hooking up fuel pressure gauge to see if pressure drops over night while parked up. How much of a pressure is normal once engine is shut off. ??? Trying to narrow down if it the fuel pump check valve or injectors leaking causing the drop in pressure. Thanks mate
@khalileboodhoo891
Жыл бұрын
would that lack of fuel pressure give you a flashing CEL at high rpm WO throttle intermittently?
@kaicunningham6870
10 ай бұрын
How did you get the other connection off? I don’t have room to put the special tool behind it.
@mertgayretlii
Жыл бұрын
First of all thank you for great videos! I have a problem and i need your help. I changed fuel pump and fuel filter on my NB. When i put ignition i don't here the pump priming at all and i try to start the car and the engine crank not starting and then suddenly like explosion and I'm getting leak from fuel filter area. Do you think it can be clugged injectors? Or bad fuel pressure regulator?
@aracing
Жыл бұрын
Answered on Q&A Monday
@uniqueskillstv9362
2 жыл бұрын
Hey man quick question? What’s that part called where you took the hoses off . My car running great but suddenly turns off and I’m not getting pressure when it suddenly drives.
@aracing
2 жыл бұрын
I think you are talking about the main fuel line.
@claytonthayer976
2 жыл бұрын
im having an issue, when i let my miata sit for a few hours it will start , but instantly starts to die out, feathering the pedal does nothing and right now its basically a big paperweight. any ideas?
@aracing
2 жыл бұрын
Email me your number and I will call you on it. alangulo530@gmail.com
@danishshaheen5973
Жыл бұрын
Thanks so much
@alsiuz8707
2 жыл бұрын
Hey man your videos help me a lot. I have a question, my adjustment screw for the handbrake on the rear caliper keeps clicking and doesn't feel like it gets tighter or loose.
@aracing
2 жыл бұрын
Email me your phone number and lets talk about it. aangulo530@gmail.com
@jensenredd4939
2 жыл бұрын
Please tell me where to get the adapters I can’t ANYWHERE
@aracing
2 жыл бұрын
They came in the two kits I bought with the fuel pressure gauge. www.amazon.com/BETOOLL-Injection-Pressure-Tester-Gauge/dp/B01L17TPT2/ref=sr_1_13_sspa?c=ts&keywords=Fuel+Pressure+Testers&qid=1660921344&s=automotive&sr=1-13-spons&ts_id=15707421&psc=1
@Pop-dough
10 ай бұрын
@aracing you used the same quick release to connect to the gauge? I can't figure out how to connect the quick release it came with the gauge or did you use another part
Пікірлер: 26