Nuprol's metal basic STANAG 30/120 Mids and 300 Hicaps work well in mine - not tried the polymers, but based on your info I'll give them a miss. Thanks for taking the time to post this
@ordolupus
3 жыл бұрын
BetaProject gen3 PMAG holding approx 140-150bb will fit but will not feed without modification. You will need to remove a few milimeters in the front of the mag. Otherwise it engage the feed mechanism properly.
@chrispetersen4863
3 жыл бұрын
Had the same exact issue with the G&G Combat Machine GC1 46 M4 Carbine AEG. Thank you!!
@darylobey8867
2 жыл бұрын
One big peoblem is its not the gun its infact the mag release is the issue the way thay sit or feed is sue to the mag release
@zedex.4987
4 жыл бұрын
please do a review on your 416 i have the same one and your build looks sick, im trying to find out what parts work
@BlackEmeraldTacticalOfficial
4 жыл бұрын
We'll have a look at a video for all the guns the team uses soon
@kriss_6165
3 жыл бұрын
Absolutely love your barrel and front rail setup. Mind telling me where its from? Might get it.
@JBAIRSOFTIRELAND
5 жыл бұрын
If you file the top part of the mag catch window on your PTS MAG so your mag catch can click in. its not lined up with your mag catch. The window is to small.
@TheHalude
5 жыл бұрын
Thanks for the info mate, just bought a SA-04 and my areas mags didn't fit will try the cyma mags
@watermelon996
5 жыл бұрын
Doesn’t anyone know where to buy these in the us I have looked all over the place!
@janzugic6798
4 жыл бұрын
can you link the exact mag please
@robinpugh1690
2 жыл бұрын
I have a similar problem with my H12. Would they work with that specna arms gun?
@OscarAMartin
5 жыл бұрын
Im using the battleaxe pmags from taiwangun and works really good for me
@Gijsvanmiddelkoop
5 жыл бұрын
What kind of weight bbs are you using? I got the g&g mags and got feedding isseus and it happening more with .3 bbs
@ahrenscat8517
2 жыл бұрын
Would battleaxe steel mags work?
@OscarAMartin
2 жыл бұрын
@@Gijsvanmiddelkoop 0.24
@OscarAMartin
2 жыл бұрын
@@ahrenscat8517 dont know, I only have pmags
@blinx2735
Жыл бұрын
you got a link to where i can buy these? thanks
@darylobey8867
4 жыл бұрын
I run the g&g 416 epm emag pmag and ost pmag types dont fit with out grinding them the g&p skull frogs fit every stanag even the shitty gen 1 elite force works womderfull in it the modify 190s work mind you the fins have the be grinded down the 416 is picky but i still love it :)
@patriot4645
3 жыл бұрын
what model is this
@luminous_
Жыл бұрын
yo is that handguard MLOK?
@bboperator8490
4 жыл бұрын
Is that the 14" witch model is that
@danielpicconi4173
4 жыл бұрын
U the man..
@chalkbos
3 жыл бұрын
Or you can buy Specna Arms mags, Pmag and SMag....work very well
@RS-mq2ld
3 жыл бұрын
Do they fit in the sa h02?
@lokiamir5029
5 жыл бұрын
Where did you put the Velcro on the material?
@lokiamir5029
5 жыл бұрын
@@BlackEmeraldTacticalOfficial I know I have the cyma mags and the SA-H06 but it does not lock properly. I'll probably need to file a bit on the section where the locking goes on the mag.
@lokiamir5029
5 жыл бұрын
@@BlackEmeraldTacticalOfficial just an update. Ordered some battleaxe midcaps the ones that looks like the cyma and they work flawlessly. They are also cheaper than the cyma. Each on taiwangun.com costs around 6.50 EUR.
@sonofodin7944
5 жыл бұрын
G and g m4 mags fit and work too 🤜
@davidmester6008
5 жыл бұрын
@Mattcockeller G&G m4/16 pmags work?
@sonofodin7944
5 жыл бұрын
@@davidmester6008 mine do yea
@janzugic6798
4 жыл бұрын
they dont on specna arms sa-h05 i tried :(
@chrispetersen4863
3 жыл бұрын
@@davidmester6008 I picked one up to test. It is super tight, but feeds well, put you have to fight with them to get them to release. Way too time consuming in the middle of a game sadly. This is with the G&G G&G Combat Machine GC1 46, which has the same mag issue, not the Specna so YMMV.
Пікірлер: 34