good video bro. I followed it step by step and managed to bring my cpu temps from 97 degrees on average to 83 degrees.
@koolingmonster
Ай бұрын
You are very welcome. Thank you for the comment! We are so glad that our videos or products might be of help!
@sentai968
7 күн бұрын
Does this help if my laptop is not turning on due to overheating?
@PiotrBarcz
5 ай бұрын
I have one of these. I have to say right now that if anyone wants to clean the fans and do it well, don't do what I did and try to disassemble the cooling system using only your finger nails or a couple of kitchen knives as pry bars. Lenovo made a massive mistake with the position of one of the fan power couplings and it's impossible to get it out without using a dedicated pry bar (which I wish I had). I ended up not even being able to get the heatsink out so I brute forced the cleaning instead by using my vacuum cleaner on max to suck out all the dust I could see on the fans and probably pulled a little out of the heat sink ducts which I know were PACKED. Unfortunately the cleaning didn't do anything for temperatures but at least lag spikes sort of went away when using OpenGL realistic lighting. However the lag spikes went from being light and frequent, to infrequent, but VERY severe (FPS dropping from over 100 to around 6). I believe that Lenovo botched the computer because this thing has been having issues all the time, I don't recommend Lenovo machines at all, I've never seen one with no issues.
@koolingmonster
4 ай бұрын
Manhandling a computer with brute force can easily damage it, as applying force doesn't necessarily solve problems and is likely to cause harm. Therefore, we recommend using professional tools, such as our KOMBO-01. This type of tool is specifically designed for disassembling computers.
@PiotrBarcz
4 ай бұрын
@@koolingmonster Indeed, next time I'll make sure I buy a couple before I go and tear into my Legion again xD Though hopefully by the time I have to clean this thing again, I'll have an actual PC that won't clog up with dirt so quickly.
@dnnisamn6886
8 ай бұрын
Im using lenovo legion 5 rtx 3070 adquired january 2022 maintaining most of time gaming cpu temp 60-70° while gpu lower. Is necesary repaste soon in my case?
@koolingmonster
8 ай бұрын
The CPU and GPU temperature seems great! However, after two years of using a gaming laptop, the thermal paste most likely has dried up, replacing it can give you even better temperatures!
@dnnisamn6886
8 ай бұрын
@@koolingmonster Im wondering if its still risky putting laptop on sleep mode, ocasional times the windows update automaticaly install even the laptop lid is closed(but in sleep mode)
@dnnisamn6886
6 ай бұрын
@@koolingmonsterI was expecting to repaste with Artix mx5 but month ago someone told me to not do it because its risky heatsink bad design of Legion 5 2021. I wonder if its true, by watching video looks life easy repasting but i guess it will be same instead fixing the temperatures
@alanpacheco9530
7 ай бұрын
I have done every step and my fans turn off after 5 seconds! What did i do wrong?
@zvezda4994_
7 ай бұрын
you're cooked bro bro 🙏
@woIfson
7 ай бұрын
maybe you didnt connect the faans properly, retry to do the process
@koolingmonster
6 ай бұрын
After cleaning the dust and replacing the thermal paste in the Lenovo Legion 5, the fans stopping after 5 seconds could be due to several reasons: Installation issues: There might have been a problem during the reinstallation of the fans, such as incomplete contact between the fans and the CPU or GPU, leading to poor heat dissipation and hence the fans stopping. Connection problems: The power or control cables of the fans might not have been correctly connected or may have become loose, causing the fans to not work properly. Improper use of thermal paste: The thermal paste might have been applied too much or too little, affecting the cooling effect. The thermal paste should be applied evenly; too much or too little can both impact the cooling efficiency.
@specialchannel1787
6 ай бұрын
Have you solved this problem? What did you do?
@alanpacheco9530
5 ай бұрын
@@koolingmonster thank you I enjoyed your products.
@upaSilent
24 күн бұрын
it's not 100% that paste is dried as lenovo use 2 phase paste on their products and it is solid and dry till aprox 55 degr celsius, then it starts softening. Ofcourse you need to be sure what paste applied on yur product.
@koolingmonster
13 күн бұрын
Hello, are you referring to phase change material! We still recommend using high-performance silicone grease. Next time, you can try our KOLD-01 phase change chip, which will continuously switch between liquid and solid states. This process can easily cause displacement and result in heat dissipation failure
@michelecorradino6633
4 ай бұрын
The repaste of that model require Honeywell ptm 7950 thermal pads...
@riichobamin7612
4 ай бұрын
why ?
@michelecorradino6633
4 ай бұрын
@@riichobamin7612 Because it is the one applied by the factory. I tried applying various thermal pastes including mx4 and mx6 and others of excellent quality but the temperatures were higher and not by a little. I think it's due to the fact that the pads have a thickness of 2mm and therefore put the die in good contact with the heatsink plate, whereas with the thermal paste there is a bit of space left.
@riichobamin7612
4 ай бұрын
@@michelecorradino6633 Shit. I am in a terrible situation. I have a 2022 Lenovo Legion 5i and last year a Lenovo technician had changed my screen. He had taken off the entire thermal system to do that and I do not think he reapplied PTM7950 because now my laptop reaches 86 Celsius on the GPU (RTX3070ti@140Watts) within literally 2 mins of launching games. I was thinking of getting thermal paste reapplied. But I think I should instead go for PTM 7950, right ?
@LarryTheRandom
3 ай бұрын
Do you know where I can get the thermal pad/paste from?
@riichobamin7612
3 ай бұрын
@@LarryTheRandom I saw some in Amazon. And LTT store.
@Wikt4or
5 ай бұрын
Before replacing the thermal paste, my CPU temperature reached 95-100 degrees in games. After replacing the paste with Thermal Grizzly Kryonaut 1g, the temperatures still remain within these limits, what is the problem?
@Techh76
5 ай бұрын
I had same problem, changing paste did almost nothing. I limited my cpu to 99% and temperatures dropped quite a bit. Control Panel\All Control Panel Items\Power Options\Edit Plan Settings -> Change advanced power settings. Under processor power management set Maximum processor state to 99%. I did that and 90C became 70-80C max under full load, 30-40C idle (youtube etc). I do also have a decent cooling pad but most of the reduction (10-15C) came from limiting the processor power. Limiting the power disables turbo boost which is why ryzen processors overheat.
@Miroslaw_3
5 ай бұрын
@@Techh76 I disabled the turbo boost of the CPU (regedit key) and temperatures dropped from 100 C° to 70 C°
@ynglingen-qd1iw
5 ай бұрын
Do you run in performance mode or balance mode? performance mode will increase the fan speed and the laptop will get hotter than running on balance mode. When you're gaming, do you have your AC adapter plugged in? Does your battery charge at 100%? a charging battery can increase the overall heat in a laptop as well since the battery will become hot while charging. Use Lenovo Vantage and set a threshold to only allow the battery to charge at 50 -60 %. Make sure to clean all the fans, buy a cooling pad to have underneath your laptop to increase the airflow. You could try Liquid metal instead of thermal paste, though you need to know what you're doing if you going with that option.
@Techh76
5 ай бұрын
@@ynglingen-qd1iw balanced, conservation mode is on, doesnt charge over 60. Fans clean, great cooling pad. Only rhing that has helped is limiting the processsor. Currently limited to 87%.
@ynglingen-qd1iw
5 ай бұрын
My comment was meant for Wiking. When you limit your processor to 99% or less you're disabling turbo mode. You shouldn't have to do that. As long as it doesn't go 105 or above under heavy load then it's not a problem. Modern laptops will shut down when they've reached a temperature that can break it, As long as you don't see any throttling or it shuts down, then it's no problem.
@fajarabdullah6786
25 күн бұрын
May I ask? what size screwdriver do you use that screw in the upper right corner? i just don't know what size at that point
@koolingmonster
13 күн бұрын
size PH0 ,here you are . bit.ly/kombo-01-yt
@oleglog6927
28 күн бұрын
Good day to you. Im using lenovo legion 5 rtx 3070 made in 2021 maintaining most of time gaming cpu temp 100° Used to be not more than 90 but now seems bad. Should I use thermopaste showed in this video? Or native Honeywell PTM 7950
@mnbvmnbv7934
19 күн бұрын
Use honeywell. I made the mistake of using the thermal paste shown in this video, and the temps are still high. I'm now waiting for the Honeywell thermal pad
@koolingmonster
19 күн бұрын
Welcome to try our KOLD-01 silicone grease, it's different from the typical silicone grease you mentioned. The specific difference is that generally silicone grease uses a solvent formula, where the solvent evaporates when exposed to heat, and the silicone grease dries and cracks, losing its thermal conductivity. We use an exclusive solvent-free formula to perfectly solve this problem. So using a laptop has better heat dissipation and longer lifespan.
@nikitauzlienko9
2 ай бұрын
hi, I need help after I took apart my Lenovo laptop and cleaned it, one of my coolers stopped working, what should I do?
@Unknown373d
2 ай бұрын
go to laptop servie
@koolingmonster
Ай бұрын
Hello, there are a few common reasons why a fan might not be working: 1. The thermal paste is performing too well, causing the temperature to stay low and the computer to determine that the fan doesn't need to operate. 2. The fan connector might not be properly connected; it's a good idea to reconnect it. 3. The fan’s wiring might have been severely compressed during reassembly; it’s worth checking and rearranging the cables. If you need to rearrange the cables or reconnect the connectors, remember to power off and discharge the laptop first.
@pajoreq5571
3 ай бұрын
hi so i've just cleaned my laptop, applied new thermal paste and everything seemed normal but when i turned on my laptop the vents became really, really loud and when i turn on any game it shows that gpu is at 100% but cpu is goint at 0%, what's going on what can I do?
@GemboyTV
2 ай бұрын
Any update did you fix the problem?
@koolingmonster
Ай бұрын
Hello, there are a few possible issues: 1.You might be using a lower-performance thermal paste from the market instead of our thermal paste, which isn't providing effective cooling. 2.Your application method might be incorrect, leading to ineffective cooling. 3.The heatsink might not be properly secured, preventing effective heat transfer. 4.This issue could be related to fan aging or damage. Excluding the fourth possibility, we recommend using high-quality thermal paste and properly applying it during disassembly to effectively resolve this issue. Over time, fans can become noisier due to wear and tear. If the fan blades become deformed or damaged, they can create more noise during operation. We hope this information helps you.
@alejandrocn63
8 ай бұрын
Hello, good evening, I am writing this comment to know if you can tell me what thermal paste and thermal pad the Asus Rog G713qr uses and which one you recommend since I need to maintain it.
@koolingmonster
8 ай бұрын
The thermal paste that comes with the laptop is not of high quality. If you are planning to change thermal paste, check out our thermal paste product which has a special non-solvent design that prolongs its lifespan.
@dnnisamn6886
5 ай бұрын
Excuse me, which is the recommended minimum Cpu state for this laptop if I wanna improve without stuttering issues? I have 5% min and max 99% and Cpu perfomance boost:disabled. The temperature equaly runs fine around 68°max while gpu does the same. If I activate Cpu perfomance boost on Cpu goes up 80° and Gpu 45° while playing Genshin impact
@ynglingen-qd1iw
5 ай бұрын
105° is the "maximum" anything below that is ok while being under heavy load and boosted to its max performance. Some games are very CPU demanding, some games are GPU demanding, it all comes down to the games. Those temps is not a problem. 80° while gaming and having turbo on is not bad. The only time something is bad is when your temp is 70 - 80 while watching youtube or just scrolling through the web.
@koolingmonster
5 ай бұрын
Based on your description, the current state of your computer's CPU is good.
@user-qe5rw7sw2w
6 ай бұрын
does anti static brush rwally make a difference or can i use other brushes
@koolingmonster
6 ай бұрын
We recommend using the anti-static brush included in our set for cleaning. It's specially designed and works very well~
@martinlysy
6 ай бұрын
If you dont touch any circuits, then its okay.
@maxchellmastom5501
8 ай бұрын
Do asus tuf dash f15 fx516pm please!
@koolingmonster
8 ай бұрын
We have added Asus TUF dash f15 fx516pm to our production list. We will mention you when the video comes out. Stay subscribed!
@bobjeff9778
8 ай бұрын
do a msi gaming laptop!
@koolingmonster
8 ай бұрын
We have a few MSI laptop tutorials on our channel. If there is a specific model you want to see, tell us and we will make a video!
Пікірлер: 65