Hey Eddie, another awesome video of the firmware update of the AR637TA! Well explained and filmed for each step of the way! Thumbs up!
@eddieksrc
Ай бұрын
@@Cadillacstsv06 you’re too kind… thanks my Friend!
@rlbutterfield
17 күн бұрын
Good explanation and video. Thank you for doing this video.
@eddieksrc
17 күн бұрын
@@rlbutterfield thank you… I hope it was able to help you.
@CvoHobo
Ай бұрын
Nice video Eddie, thanks for posting it 👍🏻👍🏻
@eddieksrc
Ай бұрын
I’m glad I decided to do the videos. I hope it helps some of the guys that are having troubles with the update…. Thanks for the encouragement my Friend!
@notoo7
Ай бұрын
Excellent, I just started playing with the nose wheel gyro.
@eddieksrc
Ай бұрын
@@notoo7 I’m going to check that out tonight.
@txkflier
Ай бұрын
I put my planes into SAFE mode to check the gyro response. If that option works like that if you don't have SAFE enabled, it would be easier to tell what the surfaces are doing. I take the prop off when setting up my planes. To check the gyro direction on the rudder, you have to open the throttle above 25% to activate AS3X. If the Gyro Response utility makes the rudder move without opening the throttle, that would be good. I don't go to a new restaurant until they're been open for at least 30 days. So, it'll be about a month before I install the new firmware.
@GenealRC225
Ай бұрын
Dang that’s big! I have the smaller t28 Trojan!
@eddieksrc
Ай бұрын
@@GenealRC225 she’s a big baby doll!
@JeffinLowerAlabama
Ай бұрын
Eddy great video on setting the RX + Jeff in LA USA
@eddieksrc
Ай бұрын
@@JeffinLowerAlabama thanks my Friend!
@feelgooddany
Ай бұрын
Good video thank you 😊
@eddieksrc
Ай бұрын
@@feelgooddany thank you for the comment!
@mikeking3297
Ай бұрын
I have 4 updated So... far! only 1 needed me to factory reset it again. FM was not functioning properly. model names in the programmer seemed to have limited characters on some recievers.
@eddieksrc
Ай бұрын
I have factory reset 3 of mine so far because they were all BNF receivers. Not sure about your other issues…
@aidengriffen
Ай бұрын
Thanks Eddie great video!! Quick question..So if I just do a factory reset on my receiver from my Transmitter it will automatically upgrade it to the AS#X+ firmware? I don't have to download it from my laptop?
@eddieksrc
Ай бұрын
Yes you need to watch my first video because you do need to download the update to your receiver.
Ahhh yes ...didn't see the "part 2" ...need more coffee!! Thanks again! Keep up the goodwork.
@joemusto5973
Ай бұрын
A bit off topic here but I noticed that you had a multi servo connection block from the wings to the receiver, what did you use for this? I have been looking for a solution for while as the "rats nest" is doing my head in 😆. Maybe another video showing this?
@eddieksrc
Ай бұрын
@@joemusto5973 good pickup… yes it is an Electro Dynamics unit. I believe it is a 4 servo unit. You will need 2 of these sets.
@eddieksrc
Ай бұрын
@@joemusto5973 www.electrodynam.com
@joemusto5973
Ай бұрын
@@eddieksrc Thats great Eddie, thanks for the reply. Weathering on the plane is awsome btw 😀
@joemusto5973
Ай бұрын
@@eddieksrc Thanks again Eddie, looking to see if I can source one in the UK, or they may even post to me!
@eddieksrc
Ай бұрын
@joemusto5973 thanks buddy…
@TheRyaninspokane
Ай бұрын
Can you adjust the safe angles? Pitch up 50 to 60?
Пікірлер: 32