THE TRANSMITTER I TALKED SO MUCH TRASH ABOUT.....MAN I LOVE IT!!!! I WAS SO WRONG, IT IS WORTH THE HYPE!
@mntdshootrdoc1
2 ай бұрын
Love my IX 14!
@FatGuyFliesRC
2 ай бұрын
So far I do too.
@ricardopr54
2 ай бұрын
That's the radio I picked to replace my iX20SE when it went bad. They are both awesome radios, but since I am already using the iX14, my iX20SE is now my backup. I hope that you enjoy your radio for a long time my friend... Have a great rest of your day 😊 Greetings from Douglas, Arizona 🌵🌵😊👍🏾🇵🇷 Like #49
@FatGuyFliesRC
2 ай бұрын
Thanks for sharing and you have.a great one two.
@ricardopr54
2 ай бұрын
@FatGuyFliesRC I just had the maiden flight of two new jets that I lost due to the faulty iX20SE...An E-flite F-16 Thunderbirds 80mm and a Freewing F-22 Raptor 90mm. The videos are on my channel, but they are one week apart. The F-22's maiden was last weekend, and the F-16's was the weekend before. Both maiden flights with my new iX14 radio. 😁 Have a great rest of your day, my friend...😁 Greetings from Douglas. Arizona 😁🌵🌵👍🏾👍🏾🇵🇷
@feelgooddany
2 ай бұрын
💛💛iX14💛💛 Bought this transmitter and never look back again !!
@FatGuyFliesRC
2 ай бұрын
Well I am very happy so far.
@oldmandoingstuff8997
2 ай бұрын
Im 65 yo 17 Years in Hobby in Alabama, I understand, An Congratulate,. On the 14,,,,,At Yall's Level of Commitment I can see it. Whew Im A 2nd hand Flyer,,, low Budget have the dx6 for my needs. Took 14 years to wear out 2 DX6i 's,,.. Look foward to U showing What the 14 can do tks
@FatGuyFliesRC
2 ай бұрын
Thanks for sharing your experience with me. as i get to know this transmitter I will show what I have learned about it.
@oldmandoingstuff8997
2 ай бұрын
@@FatGuyFliesRC look foward to it
@SCRedneckRC-Tony
2 ай бұрын
I try to get out of the Spektrum eco-system as soon as possible, I generally replace with Radiolink or now FlySky, I tried a Radiomaster but it was far beyond my capabilities
@FatGuyFliesRC
2 ай бұрын
I just have to much invested in Spektrum over a 120 planes all with spectrum or spektrum protocol RX in them. Also just got this IX14 that works great so far.
@jack78_
2 ай бұрын
thnx for sharing, i just bought the ix14, i currently have the dx8E. i can just put the microsd in the ix14 and transfer the models from the dx8 to ix14?
@FatGuyFliesRC
2 ай бұрын
From what I understand yes. But not the other way around.
@jack78_
2 ай бұрын
@@FatGuyFliesRC Ty
@proline1349
11 күн бұрын
What EDF are you flying?
@FatGuyFliesRC
11 күн бұрын
That is the Arrows Marlin, my main "go to 64"
@janrc
Ай бұрын
The scroller in the DX/NX radios can easily be fixed by soldering small capacitors parallel zu the scroller contacts. I have done this and it works like a charm. But I also love the iX14 - especially after the last update, providing all the features of the iX20. The android part in the iX14 ist completely separated from the AirWare part. The android app can crash and this will have absolutely no impact to the current running model flying the plane.
@FatGuyFliesRC
29 күн бұрын
I know it would be simple but I am already knee deep in the IX 14 and love it. i may just do as you say and then have my NX10 as my backup.
@M4rkmcc21
2 ай бұрын
Set up my IX14 after retiring the NX10. I really really like it. Wish i changed sooner.
@FatGuyFliesRC
2 ай бұрын
Well I got about 25 flights on mine now and love it. My only issue is my belly touches the screen making it switch to other screens while i am flying. luckily that does not affect the flying any.
@M4rkmcc21
2 ай бұрын
Ahh if the nx and dx can buddy box with the ix series then even better excuse to keep it!
@FatGuyFliesRC
2 ай бұрын
True I may still , but first I need to get the NX 10 fixed.
@andystoybox1723
2 ай бұрын
The Roller switch went out on my nx10 also. I found a replacement switch on eBay . it was a pain to replace it , I practically had to take the whole transmitter apart to solder on the new switch .. I purchased the IX 14 And I love it ! I gave my nx10 to my son , now he uses it .. I will not buy a transmitter with a roller anymore, they wear out to quick, especially if you fly a lot ..
@M4rkmcc21
2 ай бұрын
Same situation 👍🏾
@FatGuyFliesRC
2 ай бұрын
Thanks for sharing. i will have mine fixed by HH and use it as a back up. I might donate my DX9 to my club for the training pilots to use.
@djr01974
2 ай бұрын
You flying in a the rain? I wouldn’t risk water getting in my controller👌
@FatGuyFliesRC
2 ай бұрын
it was slowing down not as bad as it looked on film.
@notoo7
2 ай бұрын
It's been an adventure. Very much a love hate with the IX14. But I really don't use my NX8 and 10.
@FatGuyFliesRC
2 ай бұрын
Well I am pleased so far.
@ironmover5800
2 ай бұрын
I have switched RX several times it sux , added all models manually each time have the nx20 hope it last a long time
@old-rcplane-phart
2 ай бұрын
Only bad thing about ix's is it's android.
@FatGuyFliesRC
2 ай бұрын
I hope so too
@JeWCyDuDe
2 ай бұрын
It was $20 and 30 min to change out that roller.
@FatGuyFliesRC
2 ай бұрын
Well then I am really in the hole money wise but very happy with the Ix14.
@JeWCyDuDe
2 ай бұрын
@FatGuyFliesRC your money spend it how you want. As long as you're comfortable that's really all the matters. Did you send in the nx to get repaired
@FatGuyFliesRC
2 ай бұрын
@@JeWCyDuDe Not yet but I will thanks!
@thereal-stl_slim
2 ай бұрын
Waiting for the DX8+
@FatGuyFliesRC
2 ай бұрын
Hope you have it soon. Did not know they were doing a DX8+
@thereal-stl_slim
2 ай бұрын
@@FatGuyFliesRC NX8+ my apologies 😔
@FatGuyFliesRC
2 ай бұрын
ok.
@old-rcplane-phart
2 ай бұрын
Plastic rollers on the dx-nx series r garbage! Always has been. HH can replace-repair them, for a fee. Radiomaster tx16s max2 rollers r all aluminum, dual bearing roller, & NEVER wear nor wear out + touch screen. Idk y in the world HH or anyone doesn't have an aluminum +bearing roller. Probably because they'd never wear out🤷♂️🤯
@FatGuyFliesRC
2 ай бұрын
That way you must have it repaired and go without a RX for 3 weeks. If I started over without Spektrum I would go with Radiomaster, but this is already bought and they wont take back after you have flown with it.
Пікірлер: 44