Anyone having an Error 1 and Error 4 issue, try disconnecting the power to the positioner, then removing it from the mounting plate. Then remount, reconnect power, and run the autos program. This worked for me. You make have to try this 3-4 times to work out the errors. These Sp400 and Sp500 units can be finicky when linking the magnet to the positioner. Good Luck!!
@djrjoseysa8868
2 жыл бұрын
This was very helpful, thank you for sharing 👌🏾
@harman3558
2 жыл бұрын
I'm very glad that I could help.
@yuriyvolinskiy5093
2 жыл бұрын
Thank you 😊😊😊 дякую
@harman3558
2 жыл бұрын
Uwc Yuriy 🖐🖐
@abuilyasabuassiya7691
5 жыл бұрын
Hi! error4
@Kochei
5 жыл бұрын
The same here, The manual says "ERROR 4: the valve stroke is less than the minimum allowed: 10 mm for valves linear or 5th for quarter turn valves." it seems to be the air valve system is broken...
Пікірлер: 7