But is the wing strong enough when it’s joined together at the middle with only CA glue? Not even a carbon fiber spar 😧!
@MkmeOrg
7 жыл бұрын
Damn that's a beast :) Well done!
@pavelvlcek4082
7 жыл бұрын
Vyborne video!!!! Dekuji
@eqope
2 жыл бұрын
Camera angle should be improved? Top view would work better
@titanium-gravel
7 жыл бұрын
What layer height is applied to this 3d-print? How long took the print procedure for the whole plane?
@HansMilling
6 жыл бұрын
I started printing mine. The wing alone is 200 hour print or so. 0.2 mm layer height. If you have a Prusa Mk 3 you might be able to print quicker as you can print faster and with 0.25 layer height.
@jordanedward8404
Жыл бұрын
I bought 3 planes from 3DLabPrint but will not be supporting them anymore because the designs just keep getting crappier. The BF109 is a good design and has spars for wing support, but the rest don't and CA glue alone is not going to hold those wings.
@AntsRC
4 жыл бұрын
Do the ducts under the wing go opposite for each side or was this a mistake?..
@slammerf16
2 жыл бұрын
HAhah good spot. Yes, they should be symmetrical on the MkIX.
@titanium-gravel
7 жыл бұрын
What kind of filament is used for this 3d print as well what kind of glue? Thanks!! ☺️
@HansMilling
6 жыл бұрын
Cyano based glue, I think any PLA filament will do.
@calebdrake3544
5 жыл бұрын
wondering if PETG would be a better choice as it's more durable
@suncoastbart
5 жыл бұрын
Wouldn’t you know it.....run out of accelerator right when I’m ready to join the two wing halves...😢
@suncoastbart
5 жыл бұрын
Also, anyone printed and hit the skies with this one? I’d be interested in your motor/esc/battery setup 👍
@HansMilling
4 жыл бұрын
I bought the recommended by their guide. kzitem.info/news/bejne/lGaey3qHpKaQi44 HobbyKing Red Brick 70A ESC V2 Turnigy 90 Degree All Metal Servoless Outward Operating Retract Unit 90 Size (1pc) Turnigy Aerodrive SK3 - 5055-430KV Brushless Outrunner Motor ZIPPY Compact 4500mAh 6S 35C Lipo Pack 30CM Servo Lead Extention (JR) With Hook 26AWG (5pcs/Bag) M6 Nylon Nut (10pcs/Bag) Turnigy Type A Beech Wood 3-Blade Propeller 15x8 (1pc) M6x60 Nylon Screws (10pcs/Bag) Turnigy 60~90 Size Alloy Sprung Oleo Strut With Trailing Link (110mm) 2pc 60CM Servo Lead Extention (JR) 26AWG (10pcs/Bag) 6 standard 9g servos
@Aikaramba12
3 жыл бұрын
The wing should’ve been connected with a Carbon rod for transportation
Пікірлер: 19