Applying and curing 2000 degree Rust-oleum high heat paint on my Saturn s-series cast iron exhaust manifold. Other paints are VHT Flame Proof, KBS Xtreme, and Thermo Tec Hi-Heat to name a few. Eastwood carries a product called Fox Body, Painting is much cheaper and easier than ceramic coating but may not last as long. I will report back on the condition as time progresses.
You will see that first I applied the high temp primer, then the paint which in my case produces a nice silver finish.
Prep work is critical. I cleaned this manifold with a wire brush on a drill then washed it in the sink with soap, then cleaned with acetone before painting.
Unlike the 500 degree paint I used on the intake this 2000 degree paint requires a curing process which can either be conducted on the vehicle or in an oven. I used the oven. The curing process shown in this video involves heating the parts to increasingly higher temperatures with a cool down time between. This tempers the paint to bring it up to full specifications.
SW2 SL2 SL1 SW1 DOHC SOHC
Негізгі бет Тәжірибелік нұсқаулар және стиль Spray painting exhaust manifold or headers - high temperature ceramic paint
Пікірлер: 48