Shop my Amazon storefront for all the DIY things! www.amazon.com/shop/evanshanks
@john-hg1dc
26 күн бұрын
Being a youtuber you'd get a deal on the respray but out of curiosity how much would it cost normally to do what you done
@bendyphoto
26 күн бұрын
dually noted . dont speel check lol
@tjhunt_
26 күн бұрын
Picasso I like it
@RAbrams64
25 күн бұрын
When is the next collab?
@P0ormansHolden
25 күн бұрын
Haha good one teej
@lateatnight8323
17 күн бұрын
Stfu tj before I come tickle you
@JeronimoQuinteros
26 күн бұрын
Little tip, if you warm up the cans before spraying with some warm water, they’ll spray a bit better than cold. I’ve painted a couple civics with rattle can myself 😅
@gettricksdietryin
26 күн бұрын
I knew this was a plastidip thing
@DustyNutz516
26 күн бұрын
you could also put Some forced air in the can itself to Put some more pressure in it
@KingofStreet3
23 күн бұрын
Did this with primer. Left the cans in my car to basically bake for a hour and then got to work.
@imSchwaggy
26 күн бұрын
16:04 she literally has your whole face 🤣. Loved the reaction
@mariomorales8187
26 күн бұрын
Gabriela's reaction was great😊
@itzj34
26 күн бұрын
Daughter is so cute... enjoy your time with them because it goes so fast
@aidenfoss7200
25 күн бұрын
I really wish your channel didn't drop off. You deserve popularity lol. Love you Evan!!
@TWRX_Chuck
26 күн бұрын
Be honest, how tired is that finger? 😂
@jeerrsshhh473
26 күн бұрын
Just a tip! Im an automotive painter, A lot of colors like a ground coat. it helps the color cover easier and faster, reds and blues specifically. i dont know how far apart the epoxy and paint coats were. painted a Chrysler Tricoat today that used a very light ground coat before the red which also lightens the color! Very impressed with the rattle can! Color looks awesome!
@SteveTheBeardedWonder
26 күн бұрын
I love this series. I painted my car with Rust-Oleum turbo spray cans. Did a lot of wet sanding and polishing after and it came out fantastic. Keep up the hard work.
@T.G.B.T.G
17 күн бұрын
😂😂😂😂😂😂 the ending with your lil ladies reaction...priceless😢. May God keep you and your family and continually bless you in the name of Jesus, amen.
@McMullen-LongMotors
22 күн бұрын
Came out pretty nice man! And Gabbys reaction was percect lol keep up the great work 😊
@armatonix
26 күн бұрын
Rattle canned my e36 with purple matt, no prep light 320 sand and wipe with alcohol before. I did it outside. Result are really good for drift missle 😅
@BeforeZack
26 күн бұрын
The paint job came out excellent, with a wet sand/buff n polish it will look like a professional job. Thank you for showing the process in normal speed, I painted a hood in black and it came out terrible but after looking at the way you do it, it’s because I was painting too fast.
@ddavidson0404
23 күн бұрын
Nice paint job looks good..... your daughter's response to the yellow was heart warming made me smile... have a great day
@neverstopskateboarding8243
23 күн бұрын
I literally can’t wait for the correction and polish video!
@dustingarley252
24 күн бұрын
Great job on the car Evan, looks great!
@masonpowers8934
26 күн бұрын
Heck yea that turned out amazing
@bloody_hernia6356
26 күн бұрын
Love that reaction!
@tinofilmz4360
25 күн бұрын
yellow helll yeahhhh!!! that lil things gonna look so sickkk🔥
@GavinVillarrubia
26 күн бұрын
LOVE THE COLOR
@R19Robbin
26 күн бұрын
Actually looks quite nice 🔥🔥
@KeViNMCMXXCIX
26 күн бұрын
Yo that color fits really good with the car!
@50_muhammaddennykartiko74
26 күн бұрын
i love this kind of video, please doin it more often on the channel
@ChinitFxt
26 күн бұрын
Dude not for nothing it came out pretty good. And lil gabby reaction 💛💛💛💛
@marlostewart1107
26 күн бұрын
Baby girl’s reaction was priceless 👍🏾💯
@d3mara
26 күн бұрын
Hell yeah dude!
@cesarhernandez8098
26 күн бұрын
Love you Evan. Love the content. Love your family 💙 keep it up 🔥💯😎
@blake93158
26 күн бұрын
Love your videos Evan shanks 😊
@daiyaanomar5528
26 күн бұрын
I’m glad this video is longer if appreciat it if all the videos could be a bit longer I’m sure a few ppl will agree with me😅just really enjoy watching your content Evan keep up the great work🫶🏼
@Snaggedonfishing
27 күн бұрын
Looks good
@Gale_Force_Raceway
26 күн бұрын
Shoulda used one of those super cans or mega cans---whatever they call em... Like 18" tall, and spectacular coverage. EDIT: OMG the little ones reaction! Awesome, may God bless!
@bendsonmedia
26 күн бұрын
Excited to See how it looks after wet sanding. Good job
@gio5797
12 күн бұрын
I was eating my dinner when the end of the video rolled in.. made me tear up a lil
@bendyphoto
26 күн бұрын
whaaaaaat? thats dope
@maxpeck6872
26 күн бұрын
Damn i was skeptical of those bmw fenders but it actually looks so good
@S550_HB
26 күн бұрын
On camera, the yellow looks awesome
@BimmerDude
26 күн бұрын
this came out great man! love the color choice ! of course i'm bias LOL
@stanbetzel291
25 күн бұрын
Holy smokes!!! Evan the music used in this video makes it a really sick episode for me❤ Where did you get the music from?😮 Love from the netherlands!
@zaylanrevz4603
18 күн бұрын
Try going wetter! Those little spots are what’s called “dry spray” looks great tho!
@cojofoplays1837
26 күн бұрын
when i was like 16 i tried rattle can paint my first car and lets just say i would have been floored to see results even half as good as this! looks sweet beautiful color
@maynellrodrigues9862
26 күн бұрын
Yes 🙌 we back baby 💯🍻
@chrisgarcia4113
26 күн бұрын
Your daughter’s reaction said it all!😂👍
@nevrlow
26 күн бұрын
Spray max deff makes great products.
@nuevopoema8690
26 күн бұрын
this is swagy
@brianrobinson9979
23 күн бұрын
The whole time I was thinking... One of these companies needs to work with Rustoleum and be able to use their Turbo cans. Those things are insanely efficient 😁👍
@1g_dsm_life154
13 күн бұрын
Ive used spray max 2k clear over Rust-Oleum and had pretty good results i canale Rust-Oleum look really good with a wet sand and buff the problem is its really soft porous so dirt and stuff sticks to it really easy and it doesn't last long. But with 2k clear it seems to hold up well.
@BrokeBoyBuildz303
26 күн бұрын
I used to work at Napa and mixed paint for a while , Than started flipping cars and used base coat rattle can with 2k clear after and always looked perfect , Prep is the most important
@stjerrim1987
22 күн бұрын
What a great job you did I’ve done something similar recently previously I used clear coat but it wasn’t 2k when I wet sanded it it looked awful regardless of compound or buffing will it be different with 2k clear coat ?
@Hoopers_s
26 күн бұрын
+1 for the heat. I use a map gas torch. Gotta be careful with it though. You can repressurize those cans too.
@LOSTHAZE_Gaming
26 күн бұрын
Watching this makes me want to pick up a beater and clean it up
@jadenlongdon2727
26 күн бұрын
Hotboxing the painting tent I see
@tateinfanger6656
27 күн бұрын
Hey Evan, do you ever think you would mess around with the 1st gen gs300 chassis? JZS147
@kyleruiz3855
26 күн бұрын
His daily advice for this video is crazy for him to say in my opinion
@Grant7
20 күн бұрын
Sweeeeeeeeet!!!!
@LifeOn4
12 күн бұрын
How many coats of Clear did you put on the car and the body kit?
@Nootjuh
26 күн бұрын
People always say you can't achieve good paint results with a rattle can. I made sure I had a thick enough coat, used some basic painting knowledge and just DIY'ed it. Turned out great!
@Jac833
26 күн бұрын
Would be cool to see a medal flake on the top
@coreymadsen6878
17 күн бұрын
Needed to hear your message today brotha man
@kbgt1523
26 күн бұрын
Much Enjoy. Very Thanks. 🤌🏼
@dereca.2990
23 күн бұрын
hey evan my clear coat is gone how hard would it be to repair it?
@user-rs5se3gp1f
8 күн бұрын
should have got the primer tinted ..grey [rimer will make the yellow look green lol
@bendancunningham9770
27 күн бұрын
Whats good love the miata even though some people hate on them i want one
@Doc.6466
25 күн бұрын
Yellow Evo returns as a yellow Miata and I’m not even mad about it
@Hoopers_s
26 күн бұрын
Devin used the same booth. Overspray/dust killed everything and made everything have to be worked on.
@jakearmstrong4375
26 күн бұрын
A white top with white wheels would have looked sick asf
@tima8831
26 күн бұрын
Heat the can. It makes more pressure and let's the paint flow alot better
@TAT760
26 күн бұрын
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
@c10j26
26 күн бұрын
I can tell u spent more can then buy shop line paint base coat clear coat or single stage good job thoe
@stevenskoog
27 күн бұрын
Notification gang!
@1993Revhead
26 күн бұрын
Please wrap the hard top in the carbon fiber product from the 350z.
@j_mars_cars
27 күн бұрын
Notification squad
@baj748
25 күн бұрын
What's the cost
@jedijakobi8978
26 күн бұрын
Not a fan of yellow but that's a sick shade on that car
@canadarocks838
26 күн бұрын
Been away for a bit. Wasn't that his sister's car?
@daniel.m3257
26 күн бұрын
Yep he start remodeling it bc his sis don't use the car and the car was just sitting
@canadarocks838
26 күн бұрын
@daniel.m3257 Ah makes sense! Always loved that miata. Thanks for letting me know
@bling1634
26 күн бұрын
You saving oven at tea tl
@kjstewys
26 күн бұрын
I know them forearms barking
@kspec6131
26 күн бұрын
I think it looked way better before you clear coated it.
@ChristianTaylor3
26 күн бұрын
That yellow looks great on a Miata
@lexuslife
26 күн бұрын
Your bumpers and side skirt is going to darker than the body of the car. Because you primered the body white and the body kit was gray.
@dewey04
24 күн бұрын
BRO! YOU NEED A MK2 CHANNEL AND PLUG IT AND WE WILL SLOWLY MIGRATE. YOUR VIEWS ARE FUCKED LET US HELP YOU ❤
@radionautomatic
26 күн бұрын
Wrong way round, epoxy primer should be what you put on first, filler primer goes on after.
@marioknowsitsgod1506
27 күн бұрын
This is dope And Jesus loves you ❤️
@hh-motorsports9646
26 күн бұрын
All that work for a rattle can job? Why not just wrap it yellow so it looks perfect love watching the videos but ur the one that said u were gonna step up the quality and finish all your builds the right way looks like a step down
@VictoriaShanks_
26 күн бұрын
Not sure what's wrong with trying something new? Definitely not half-assing this or dropping quality ❤ Check out the IS300 paint job if you want something else
@yourdaddy9622
26 күн бұрын
Dude you gotta stop posting stuff where it’s like “I’m going to do the thing” and then you bashing on what you did wrong or why it’s not perfect. It’s depressing. This is like my motivational channel lol
Пікірлер: 96