I'm sure the Chinese appreciate your efforts to improve their fakes. LOL
@lesgarten
7 жыл бұрын
Every little bit helps! I've received a lot of feedback from some folks that these videos have helped them avoid or ID fakes.
@Runsfrombears
4 жыл бұрын
Now if they only use higher end steels......
@GigaQuantum
2 жыл бұрын
@@Runsfrombears is it not S30V?
@ChrisSmith-gy9zp
2 жыл бұрын
@@GigaQuantum doubtful
@bryanmchugh1307
7 жыл бұрын
my PM2 came with a fortune cookie in the box it read "die capitalist pig". Still not sure if its a fake or not.
@lesgarten
7 жыл бұрын
Ohhh that means it's real... Die Capitalist Pig is definitely a Message from our Democratic friends in Golden, CO... I'm sure they'll come out with a Hillary Clinton version with Bleached G-10.
@bryanmchugh1307
7 жыл бұрын
PFFT HAHAHAHA for real man that was funny as shit
@BilgePump
6 жыл бұрын
Yup! That’s from Colorado alright. Hillary voting liberals.
@johnkennedy9078
5 жыл бұрын
If you tell me Spyderco is Pro Hillary Clinton, I will sell my spydercos tonight.
@junichiikeda5860
4 жыл бұрын
Lol
@clementjoe6564
5 жыл бұрын
Your video cured my insomnia.
@MM-bq7ei
5 жыл бұрын
Says he's not going to spend a lot of time looking at the box... spends a long time looking at the box.
@lesgarten
5 жыл бұрын
Fooled ya!
@MM-bq7ei
5 жыл бұрын
@@lesgarten Yeah you got me. I powered through though to see that sweet knife action.
@TysonKeola
9 жыл бұрын
Excellent video, really set my mind at ease... thanks a bunch!
@lesgarten
9 жыл бұрын
***** Thanx! Glad it helped!
@stealth1546
9 жыл бұрын
Great video! Was very informative. Happy to know mine is genuine!
@lesgarten
9 жыл бұрын
stealth1546 Great news! Thanx!
@lancet6704
8 жыл бұрын
Thanks for the great info. I was able to determine my Spyderco paramilitary 2 was legit within a short while. Great info.
@lesgarten
8 жыл бұрын
+Lance Riehl Thanx! Glad it helped!
@scottlefaivre8558
7 жыл бұрын
Seems like the jimping on the real Spyderco is much sharper than the fake also. Noticed it when you were showing the torx screw.
@willop572
7 жыл бұрын
Thanks to this video, I know now for sure that I've got the real deal pm2. Thank you!
@lesgarten
7 жыл бұрын
You're welcome!
@randomnav
7 жыл бұрын
Thanks for making a great video. I just got my Spyderco from China (June 2017) and they have fixed almost all the areas that you mentioned. There is still a discernible difference on the sharpness of the plastic. Not as much as before; but, still a little sharper. The screws are better; but, still not locking my torque screwdriver in. The skeletonized area is also the same as before, only on one side. The box is an improvement. It is sharp and clean, looks just like the original. I paid $22.65 and it took 19 days for shipping. I am very happy.
@lesgarten
7 жыл бұрын
Thanx for the update!
@luisloya1120
Жыл бұрын
Awesome
@mannyCA
7 жыл бұрын
Excellent tutorial, thank you!
@lesgarten
7 жыл бұрын
You're welcome
@heyyitsandy
7 жыл бұрын
Super detailed, and spent a good amount of time on each section... best one I've seen!
@lesgarten
7 жыл бұрын
Thanx, glad you got something out of it!
@Gorkilein
6 жыл бұрын
Finally good video with good tips So I got shipped a real one some years ago from the US
@lesgarten
6 жыл бұрын
Thanx!
@BobSicotteMusic
8 жыл бұрын
Most excellent comparison video. thank you.
@lesgarten
8 жыл бұрын
+Bob Sicotte You're welcome!
@darharm.102
6 жыл бұрын
Just ran across your video and it was a great help in determining if the PM2 was real or fake and it is real. Even buying from a reputable dealer of Spyderco Knives does not mean they did not get taken in by a fake. Thanks.
@lesgarten
6 жыл бұрын
It's been a while since I made these videos. Glad they can still be of some use.
@megagene
9 жыл бұрын
Hey man, thanks for making this great video. I just got my black Para Military 2 in the mail yesterday and I was really worried about its authenticity. I've watched a bunch of other videos on here explaining real vs. fake, but none of them put my mind at ease. This one did it though. Very detailed and methodical with clear explanations and lots of close ups. Now I know that my knife is the genuine article and I have you to thank for that. Cheers.
@lesgarten
9 жыл бұрын
megagene Outstanding! Glad it helped!
@devnull128
8 жыл бұрын
I was about to say nearly the exact same thing. THANK YOU for posting this extremely well put together video!!!
@lesgarten
8 жыл бұрын
+devnull128 You're welcome!
@yeshua1176
7 жыл бұрын
Les Garten how would I avoid buying a knock off just curious but I would hate paying full price and getting a lesser quality blade
@lesgarten
7 жыл бұрын
Make sure you buy from someone who will fully refund all your expense if you get scammed. Knifecenter Knifeworks Amazon BladeHQ Places like that. Then check to make sure it is genuine
@9o3
9 жыл бұрын
This is the best 'spot the fake' video. Had me sweating the entire time. Luckily mine has both skeletonized cut outs on the liner's non-locking side.
@ExtraCrispy357
2 ай бұрын
Hey Les, EXCELLENT VIDEO - you're really a PRO at this! Thanks for taking so much time to show so many details between the real vs. fake so we can check on our knives. I also appreciated that you commented on past experience of other fakes you've seen. Very helpful information. I was wondering, have you made a similar fake vs. real video for the Spyderco Shaman? I just subscribed to your channel, so I will try to search for it. My son and I both have a Shaman in black G10 - one was purchased from a very reputable dealer and the other was purchased from a place I don't trust as much, so it makes me wonder. Even if you haven't made such a video, I can still use a lot of the tips from this video for things to look for. Thanks again!🙂👍
@peterlowell7963
4 жыл бұрын
Thank you! Well done, organized video!
@lesgarten
4 жыл бұрын
You're welcome!
@coolplayznogame8855
8 жыл бұрын
Man you sure know good details,pointing out all that fakes flaws is almost like a jewelry expert knowing good and bad jewelry.Good video and information about authentic knives vs. copies
@lesgarten
8 жыл бұрын
+coolbut Nogame Thanx! It started out because I was worried I'd get nailed by one.
@coolplayznogame8855
8 жыл бұрын
+Les Garten You got a good channel,I just got a Kershaw Camp18 and I'm going to give Kershaw a call because it looks like a copy,but i paid the original price from a Amazon vendor.....You attention to detail is A plus
@SurvivalZoneAfricaZA
8 жыл бұрын
Thanks -- Good to be able to differentiate between real and fake and what to look for!
@TheGoatMumbler
7 жыл бұрын
I have a $20 Para II clone that is so good my dealer couldn't tell the difference from the real one. I liked it so well I ended up buying the real deal. Good vid.
@trietphan3196
7 жыл бұрын
Do you know if the steel is really s30v? They swear up and down that it is
@lesgarten
7 жыл бұрын
They are difficult to tell for sure. You can tell if you start taking them apart. The screws are soft and what they screw into is soft, so you get stripping real quick. Or they stripped it when they put them together, I've seen that a lot.
@lesgarten
7 жыл бұрын
You mean on the clone? I've never had them tell me that. But it's not
@TheGoatMumbler
7 жыл бұрын
Yes. My dealer couldn't tell the diff.
@Wieselkatze
7 жыл бұрын
TheGoatMumbler well, your dealer sells you drugs. cant expect him to know everything about knives
@spidersweb9110
6 жыл бұрын
The thing is a lot of people don't want to outlay lots of dollars for a knife... they would prefer to get a cheaper copy... I've had my grandfathers BUCK pocket knife for 35years now... and it still retains a terrific edge use it quite a lot... when I used to go shooting many years ago I then used granddads knife to skin rabbits for dinner... but today most of the knives are made in japan...china.. hong kong granddads buck was american made!!! Stamped on both blades... ok happy hunting keep sharp... cheers🍺🍺🍻🍻...
@theriddler6994
5 жыл бұрын
Got my copy of para 2 from ali for 15 dollars. And I'm very happy, great edge out of the box, fit and finish perfect and so centering. So far perfection
@enggiovane
5 жыл бұрын
David Nastoupil link?
@BobSicotteMusic
8 жыл бұрын
I've been buying Spyderco lately and didn't know there were fakes out there in the world. Apparently its a huge business. Not good. I've checked over all my Spyderco's and believe they are all authentic but as we speak I have two knives being shipped from Amazon. Both ZDP 189. One Stretch and one Endura. Both in the British Racing Green color. Thanks to you Ill be able to look them over when I get them and try to verify authenticity. Again, totally excellent and educational video! Thanks!
@luisloya1120
Жыл бұрын
Hey even Spyderco themselves are making some of their knife lines in China. Why? Because they appreciate Chinese quality control, effectiveness of their workers and pride of craftsmanship not too mention it saved Spyderco production costs while still charging top prices. Chinese are fantastic copy makers and they use modern machinery and Our steel. I have no problem purchasing their items.
@mealex303
7 жыл бұрын
hi there Newest subscriber here! liking your videos you really helped me with the Rubicon. have you tried any sharpens best products? if not please look into getting and trying it out also a video on it would be awesome! thanks Alex
@brianonthego
7 жыл бұрын
Nice information. I subscribed.
@johnadams9044
6 жыл бұрын
Thanks for the education.
@openplz3000
7 жыл бұрын
I bought it on the ebays, price was right but almost too good. it's real and everything you said is spot on. you must be a trained observer (or just OCD) , but excellent video. I'm subbing
@111111111Tiger
6 жыл бұрын
The star / torx screws are a quick way to identify. Good catch ! thanks
@lesgarten
6 жыл бұрын
You're welcome El Tigre!
@kevins8790
9 жыл бұрын
Thank you for manually adjusting the focus instead of just waving the product around and yelling focus. I hate when videos do that. Got my fist spydeco otw in the mail (paramilitary 2) :)
@lesgarten
9 жыл бұрын
Kevin S Focus is a constant irritant! Congratulations on your new knife.
@MrBigTexFyre
4 жыл бұрын
The proper phrase is “focus you fock” AveE
@cliffont
8 жыл бұрын
Good vid. What does the E and SA looking characters stand for on the right side of the blade?
@lesgarten
8 жыл бұрын
+Cliff Barry Those are the Initials of Sal Glesser and Eric Glesser. Father and son who designed the knife and own Spyderco
@cliffont
8 жыл бұрын
+Les Garten Interesting, thanks. I like how each knife has a different camo pattern on the handles.
@revshareglobal7334
3 жыл бұрын
Yea the foam here on your video matches the same foam I have and there is a space between the box and the foam. Thats actually a great way to know if its a fake or not.
A really obvious one that jumped out to me was that the thicker ridge between the choil and the beginning of the cutting edge bisects the middle of the finger hole on the genuine, while crossing about 1/3 of the way up the hole on the fake. I actually kept waiting for him to mention it the last couple of minutes when he kept holding them up side by side to look at the markings.
@ttattx
Ай бұрын
1 thirty in you called Spyderco's "overpriced" --- I almost spit out my coffe - I know this video is 7 years old, but if you look today pricing on Spydercos has remained stable, and only small increases to pricing in the past year or so (due to all the BS we had to deal with the coof)... so that comment to me didn't age well - meanwhile, Benchmade asking the prices they are - now that's something worthy of being called "overpriced" - and the QC is garbage, bad grinds, uneven plunges, nothing exciting... Spyderco on the other hand continues to create new products, and even their own steel!
@schneir5
4 жыл бұрын
26:34 I don't know if it's mentioned in the video, but I think I just noticed another difference in the blades. On the fake one, above the hole, there is no visible line for where the blade's full flat ground taper starts, but there is in the authentic one. What do you guys think?
@schneir5
4 жыл бұрын
@100% Video Thanks!
@wvmountaineer69
7 жыл бұрын
Thanks les, you put my mind at rest
@Jabbawokeez4
9 жыл бұрын
Great video
@lesgarten
9 жыл бұрын
Jabbawokeez4 Thanx!
@mitch8419
3 жыл бұрын
I believe the weight is supposed to be 3.75 Oz, however my pm2 weighs in at 3.82 Oz. Everything else checks out for authenticity. Perhaps you could do a weight comparison of the clones versus the real one. Many thanks for the excellent and tedious work 😀
@eccoshoe1
2 жыл бұрын
Funny my 10yr old para 2 fake, weighs 4.2 oz, i use it all the time and must say it has held up well,it was a gift and for several yrs i did not know it was a fake...i really dont know what the blade steel is, says sv 30, it seems to be as good a knife as my 2 real para 2s...
@jeffmwoods
8 жыл бұрын
thankyou for that , very good rundown. By all your lingo, are you a woodworker by chance ?
@lesgarten
8 жыл бұрын
+Jeff Woods No, not so much. But I play around with Car and Motorcycle engines quite a bit. Glad you enjoyed the video, thanx! Here's my Porsche Engine I built: www.turbonet.biz/misc/930/DSCF0598.JPG
@jeffmwoods
8 жыл бұрын
very nice indeed. i will attempt to emulate it in wood.
@lesgarten
8 жыл бұрын
+Jeff Woods Heh, I'd like to see that!
@michaelscave8452
8 жыл бұрын
I also noticed that the part of the steel that has Golden Colorado etched on it cuts off in the middle of the spydy hole,the fake cuts off the hole a bit lower. And the gimping is slightly angled on top of the the real one.
@Ermac97
3 жыл бұрын
Well, I'm in a bit of a pickle. I recently bought the PM2 off of Amazon and have gotten a bit of both worlds. First off, the knife was sent via FedEx, not the normal shipping service Amazon uses, and it was merely the box tossed inside the envelope. The box meets all the "fake" points; the deep gradient and the bar code not touching the numbers. However, the knife itself meets the "genuine" points; finished belt clip, the intricate screws, and the two skeletonized sections on the inside. I don't know what to make of this.
@stevenjodeir534
7 жыл бұрын
I actually bought a legit PM2 in S110V that came in a box that was broken (i assume due to domestic shipping) and the foam was larger than the bottom of the box. the foam was dense and other than size had no difference between it and any other of my spydercos. apart from box damage, everything on the box looked right as well. so, even the foam can on a legit spyderco can be off. there's always an exception to the rule.
@b.m.c.8755
Ай бұрын
I’ve owned & used my gifted Spyderco for over 23 years. Why bother with a clone when the metal and hardness of the blade is what you pay is what you get. There is a probability that the material will also rust out over time on the clone.
@kadebeeny157
3 жыл бұрын
The screws for the pocket clip on the real one have a bead blasted or matte satin finish, the fakes both have really shiny pocket clip screws.
@repeterpan
8 жыл бұрын
Thanks for the video. Just got mine off Amazon supplied by Outfitter Country, Toledo.OH. Black Blade - Back Handle - all Black Hardware. Everything checks out as genuine from the size of the foam to the chamfered lanyard hole. Even weighed in at 3.7 oz. Have you weighed the fakes? I have two concerns that are not related to the knife. 1) The box is not pristine and one corner was torn. 2) No letter was included only the Product Information & Warranty Guide. As I said, everything about the knife itself checks out. What do you think?
@lesgarten
8 жыл бұрын
+repeterpan The boxes go through hell sometimes. I don't know how they normally send them to distributors but sometimes the boxes are a little beat up. I only weigh them when they are greatly different. On the Para 2's they are pretty much the same weight. I would say if the Foam looks good, you are good to go! Which is strange as hell really. The foam is always off on the Real Spydercos. The lock area is the one of real tells. So much so that the Chinese sites are blurring that area in their photos on Aliexpress. If they have the Flashy product guide, then they don't come with the letter. It's an either/or kind of thing. Glad your is Genuine, the Para 2's are nice knives. I have a Silver/Camo and a Black/Camo and really like them as well as the Military. I am getting ready to post a Titanium Millie comparison maybe tomorrow.
@repeterpan
8 жыл бұрын
Thanks for the quick reply. My lock area looks good, not pointy. Thank you for telling me about the paper work. I'm a Happy Camper.
@stoneblue1795
4 жыл бұрын
I have seen ebay and other web listings where as they are using a REAL Spyderco for their images-- and or they are careful not to show it large where you could zoom in. The pictures don't necessarily mean anything- cause they could be showing you a REAL ONE and sending you the fake. Great portrayal here by the way, I enjoyed this.
@lesgarten
4 жыл бұрын
Ebay, full of fakes for sure. I bought a Spyderco off ebay and drove the guy crazy with pic requests.
@luisloya1120
Жыл бұрын
I don't care about the boxes much. I buy these knives for the almost perfect versions of popular/ expensive knives. These look Great and are very sturdy and functional. I own many Chinese made knives including Ganzo knives which I've had for well over 10 years, still work perfectly.
@Revelatus
7 жыл бұрын
One other thing I noticed from your side by side at 26:15 is that the plunge line on the fake doesn't really go all the way to the top on the spine side of the spidey hole, at least it's not as defined as the real one.
@lesgarten
7 жыл бұрын
Some of the grinds are good, some not. You can sometimes run across knives that look like they were ground by beginners for sure. Real spydercos can have this problem as well.
@seeker_9579
7 жыл бұрын
I've also noticed in your video that the start of the edges on the fake knives start a bit closer to the thumb rest than the real ones. @ 26:12
@danielheller9624
9 жыл бұрын
what if you mixed them up
@jroddearing14
Жыл бұрын
Where did you order the clone at I would like to see the difference between mine thanks so much
@lesgarten
Жыл бұрын
7 years ago -- Aliexpress
@jroddearing14
Жыл бұрын
@@lesgarten thank you so much
@TheIronwil
Жыл бұрын
Nice. I got a clone Para Military 2 with the tanto blade, and after watching this video I’ve concluded that either China greatly improved the clones or mine is not a clone. I liked the Para Military 2 so much I ordered an OEM with the original blade in S45VN. They’re different blade styles, so there was a tiny difference in where a symbol was etched (not the logo - other side). Not really concerned either way though. I’m not selling them, and they’re both awesome.
@markhamilton3215
Жыл бұрын
where to buy a PARA 2 Curve blade (normal) china clone ? EDIT : Resolved , Ordered 3x clone for $36 S30V :P
@ejlucas93
9 жыл бұрын
The jimping on the blades looked a lot different too!
@hohanrodanrodan9624
3 жыл бұрын
Man, how’d you end up with so many clones?
@ryanriggs8960
7 жыл бұрын
i got one with with a barcode not touching the numbers but everything checks out to be a legit pm2 should i be ok?
@lesgarten
7 жыл бұрын
Where did you get it?
@jhdeval
8 жыл бұрын
In regards to the barcodes what you are looking at are different densities of the barcode. If you look at the genuine you will see it is wider that means it has a lower density versus the fake which has a higher density. The numbers touching are simply the size of the font. The chinese clone boxes could easily make these changes to appear real.
@lesgarten
8 жыл бұрын
I would agree with that. It has always been amazing they didn't do such a simple fix.
@Revelatus
7 жыл бұрын
My para 2 came from amazon, it's got the foam of the real one but the barcode text looks like the fake ones. It's definitely real though looking at your comparison of the G10. It's a perfect 90 degrees all around the edge, sloped near the lock cutout, and very toothy. Lanyard hole, pivot screw, and skeletonized liner also matches the real one in your video. So I guess the barcode text isn't really a good indicator at least as of Nov 2016.
@lesgarten
7 жыл бұрын
The most important parts are the knife. The boxes are printed in China. Some of the places that make the boxes for Spyderco may make the clone boxes. Some Spydercos are made in China as well. As long as the knife matches up, that's good. That's why I say even though the boxes are interesting, it's like reading tea leaves. Doesn't mean much. I've seen really poor real boxes. The foam seems to be the most accurate thing about the boxes.
@lesgarten
7 жыл бұрын
Stay tuned for my Chris Reeve Mnandi clone review in about a month. They look like they are doing a pretty good knock off on it.
@MoherMX221
6 жыл бұрын
Just received my first PM2 tan sprint run from knife center... a little confused about the box. It has the right paper, right foam insert, but the bar code doesn't touch the numbers. The spyderco lettering on the side doesn't look perfectly centered either. The knife is razor sharp, jimping is right, etching is right, hardware, scales, liners, everything seems right about the knife, but the lanyard hole doesn't exactly seem chamfered to me. Literally everything else seems legit though. Thoughts? I have another one on the way from KC in blurple. I'll check them back to back.
@lesgarten
6 жыл бұрын
Don't worry to much about the Box much. Those things are printed in China just like the knock offs. Pay attention to the knife. Try to find a clone video newer than mine. They may have figured out some stuff and corrected it. I would find it hard to believe Knifecenter got scammed.
@MoherMX221
6 жыл бұрын
Yeah I figured KC would be highly reputable. Thanks for the fast reply! the knife Is superb in every way, the only thing that doesn't fit a "genuine" description is the lanyard loop. not really chamfered that I can tell. I was so impressed with it that I ordered a blurple PM2 and a pink native 5 for my wife. Kind of wish I hadn't invested so much in benchmades now. haha
@traviscoombes3578
6 жыл бұрын
I got one. Any idea what steel they use?
@BareTheMark
9 жыл бұрын
Bought a clone two months ago, noticed that the clip is near impossible to use. Won't even let paper in. Would loosening the screws on the clip help?
@BareTheMark
9 жыл бұрын
It's so tight that it's not functional. To use it I would have to pull it up with my nail every time it goes on and off something. But I'll try bending it. Sounds like a better suggestion than find a tiny star screw head. Thanks
@BareTheMark
9 жыл бұрын
The bend worked great! Thanks
@MrPuch78
8 жыл бұрын
Could you post a link to a good pm2 clone? Very interested in one
@lesgarten
8 жыл бұрын
+MrPuch78 They change so often, that you have to look them over very carefully. Make sure they have good pictures of the lock area and don't buy the cheapest or the most expensive.
@cyberdemigod
7 жыл бұрын
Did you order your Southard and Para2 directly from Spyderco by chance?
@lesgarten
7 жыл бұрын
I ordered the REAL one's from various places and the clones from China for comparison
@cyberdemigod
7 жыл бұрын
Just curious cause some people say only BladeHQ and spyderco are authentic sources, and anywhere else is hit and miss. You should do a comparison video for the Tenacious - they are even doing the cheap knife now - on DHGATE you can buy the Tenacious in all forms - I have the black blade tenacious and was super concerned at first because I bought it on Amazon I just ordered my first Paramilitary 2 today and appreciate your videos a lot - saves me the trouble of having to contact spyderco about it - maybe even sending to them to confirm if the knife is real. By the time I got it back the return policy on amazon would be up and I wouldn't get my money back :(
@lesgarten
7 жыл бұрын
Knifecenter is good, Knives ship for free is good, GPknives is good. Amazon is OK, but beware and make sure you get it from Amazon and not a vendor on Amazon. The Tenacious is an awesome knife at an awesome price. I didn't know they were cloning them. I'll bet they are perfect matches, almost...
@cyberdemigod
7 жыл бұрын
I did order from Amazon for the Para, but a seller in the USA shipped me my Tenacious - Luckily I inspected it and it seems to be the real deal. You should do a comparison video though, the pictures I have seen are dead on - I saw them on DHGate and cannot find a video at all.
@MrBigTexFyre
4 жыл бұрын
25:51 he has to stop and think which one is real. He’ll probably end up accidentally giving away the real knife to a friend.
@lesgarten
4 жыл бұрын
They are close...
@RogueJedi501
3 жыл бұрын
My paramilitary 2 doesn’t have the numbers touch the barcode lol but I bought it from Blade HQ. Everything else checks out like where it was made, the correct punctuation and spaces on the blade itself
@onpoint1977
5 жыл бұрын
Hey Les, question do you still have the 3rd PM2 for parts and wondering if you would like to sell it
@lesgarten
5 жыл бұрын
I'll look, probably not, but we'll see.
@lesgarten
5 жыл бұрын
I found it! You can have it. Post your email, I'll grab it, PM you and delete your email post here. I just need your address.
@lesgarten
5 жыл бұрын
Got it!
@loganrhodes8912
5 жыл бұрын
I have a PM2 camp, fuckin love it. I bought mine from the stone in Golden. My camo looks more the color of your Chinese one. Your real PM2 has a lot of orange lookin color. Mine has traditional digicamo colors..
@schneir5
4 жыл бұрын
Where do you even buy the counterfeit ones?
@lesgarten
4 жыл бұрын
Amazon Just kidding... Aliexpress, DHGATE Amazon and ebay if you are not careful or paying attention
@kontrolenthusiast1099
9 жыл бұрын
At the base of the clone blade there is a slight slit/notch perpendicular to the blade edge that isn't on the genuine. That may be the easiest tell.
@lesgarten
9 жыл бұрын
KontrolEnthusiast Good eye! Almost like a sharpening notch.
@kontrolenthusiast1099
9 жыл бұрын
Les Garten Wish I could take credit for an eagle eye, viewed or read about that particular tell in another comparo clone Spyderco vs. gen.
@jaimeblanco2553
8 жыл бұрын
did they make a fake one of the manix2 lw? I ordered one on ebay and now I'm a little worried
@mackhomie6
4 жыл бұрын
being that the authentic one is cheap, why even get worked up
@firdevsyucel9601
7 жыл бұрын
I bought a para 2 off of knife center, and the numbers on the the barcode aren't touching the barcode. Do you think they would sell counterfeit knives?
@lesgarten
7 жыл бұрын
Hi, I would go more by the knife characteristics. The boxes are all made in China, so I wouldn't base everything on a computer printed barcode. I don't believe Knifecenter would knowingly sell fakes. But anything could happen. Check the knife itself very close for the things shown in the video here.
@pissedoffwhiteguy6131
7 жыл бұрын
Knife Center wouldn't sell a fake.
@Revelatus
7 жыл бұрын
+Firdevs Yucel As stated in my other comment, the new barcode text on the real knives seems to be different now. Your knife is most likely real, just compare the other details to the fakes in his video and that will be a better indicator.
@nekulicious
7 жыл бұрын
Is the steel in the clones really S30V? Or not likely?
@lesgarten
7 жыл бұрын
Bogus. But it's not terrible steel. Most likely 8CR13MOV or 440C or D2.
@clashking3123
7 жыл бұрын
So don't know why but watching these videos makes me excited to get my knockoff para 2 with carbon fiber handles
@calholli
5 жыл бұрын
As long as the blade steel is what it says... then it isn't "fake' IMO. I'll take the "fake" Ferrari with the real v12 in it all day.
@randomescu
3 жыл бұрын
i just received ( 2 days ago) a Tenacious Lightweight fully serrated black, made in China, from an european seller (Lamnia). the box does not look very well. it is intact but with scratches. the bars dont touch numbers, too. the foam is black and thick, cant see through. the knife looks perfect. anyway, i doubt Lamnia would sell fakes.
@louc940
5 жыл бұрын
Ty so much great video. I now know I purchased a FAKE.. Scumbag guy played it off he was sick and needed money and had to get rid of his para digi or 100 bucks. Stupid me should of known. If it's to good to be true. Anyway once again great video
@lesgarten
5 жыл бұрын
Sorry to hear that. There are some real scummy people out there.
@noet5329
4 жыл бұрын
They both work very well. Wish app has some really good deals.
@openplz3000
7 жыл бұрын
I don't mind a fake, although they aren't for me, as long as it is sold as such. thanks for the great info, got to check my M4 Jade pm2 out
@MrEdium
9 жыл бұрын
Hello. First off.....Great review. My question is this. Since they are both made in China, is it possible that the "Fake" ones are like what Cold Steel used to call them........."Factory Seconds" ? And how do they cut ? So you feel a difference in how they cut ? Are the fake ones as strong ? Thank You for Your Time.
@lesgarten
9 жыл бұрын
MrEdium They are not Spyderco knives. There are quite a few differences that are huge differences, not just "seconds". The clone Para 2's can be good and bad examples as shown in the video. The cut well. I don't know how to pick a good one though. There is variability in the Para 2's. Glad you enjoyed the videos. Thanx!
@Regalya
8 жыл бұрын
MrEdium The steel is the same with org and fake finish on blade itself often pretty much the same aswell so 15 bucks fake works as good as orginial one.
@lesgarten
8 жыл бұрын
Regalya Definitely make good beater knives.
@Regalya
8 жыл бұрын
Les Garten I totally agree i used to be devoted spyderco fan :D But using counterfeit spyderco's for an half year or so none of them gave any problem so far i recomend them everywhere a solid company that has over 10 million revenue should out perform it's fakes until they do i don't see any point paying up 10 times more then knockoffs... Ps: I don't like Byrd knives
@Player_Review
8 жыл бұрын
Regalya Why not buy something legal that isn't infringing on patents and copyrights? Surely China makes some cheap knives that you don't have to hate yourself as a carrier? I can't believe that the world allows these laws to be sullied so blatantly and openly. Why do people need to pretend they have a $100-3000 knife, why can't they just buy a chinese knife that isn't stamped with some other companies legit logo? At the least, please acid etch or grind off the logos... the whole practice of clones is downright disgusting and the national governments should really get involved at some point since this just gets worse every day. I know this junk usually ships directly from China to the end-user, but I'd love to see more lawsuits and possibly embargos against companies and users of these illegally produced and sold blades. I can appreciate you don't want to pay money for the real thing, maybe you don't have the cash (even though the company deserves every penny), but there are options that don't infringe on trademarks/copyrights/patents. I would love the irony of someone that makes these comments creating their blade company and then having China clone it and somehow they just don't mind their patents and logos copied and saturating the market and wrecking it. Horrible, horrible practice and a real shame that morally corrupt people encourage their production by buying these illegal blades from morally corrupt producers. For me, welcome to the world I guess. I should probably just accept that humans are intrinsically evil and that right/wrong is entirely based on upbringing, rather than something we innately have. Apologies to Spyderco and everyone else that has ever invented/designed anything. Evil people will pretend they are you and other evil people will facilitate that behavior by buying their illegal products. On the bright side, this will save me time that I may have spent creating a new unique locking mechanism or some world changing blade design, because China would just fuck me anyway and plenty of folks would line up to buy their shit.
@packinaglock
4 жыл бұрын
I'm curious what steel is actually used and how was the heat treat?
@lesgarten
4 жыл бұрын
No real way to know that with a clone
@packinaglock
4 жыл бұрын
@@lesgarten: True, I have two PM2's but I doubt neither are clones as one I got from Bentobox in M390 and the other from Blade HQ digi camo in 30v. I don't tend to buy randomly from Amazon to avoid the chance of a Chinese knock off. I still enjoyed the video though as it's interesting how crafty the Chinese are.
@lesgarten
4 жыл бұрын
@@packinaglock I've found that if you spend about $50 and shop carefully, you can get a really good knife from them. It will usually be D2 often. The $25 knives may be 8cr13mov. Then the $10-15 range will be 440c. These para clones were great for their price point. But the Chinese IME will always have a flaw to their work which is fatal in the end. They will always cut a corner. For instance on these knives. The fasteners were really cheap and soft metal. Then the fasteners are goofed into the knife itself. Overtorqued, cross threaded, etc. So it is always a potential night mare to take one apart. In the electronics realm, they will steel a really nice valuable circuit from say Krell or Mark Levinson. Then they will use counterfeit Transistors, or counterfeit low quality capacitors and you will get premature failure. They have built lots of new buildings in their country, but they don't last long, they crumble after just a few years. So people who are expatriots that live in China, won't buy any place to live, only rent. Polar opposite of Japan. They will always cut a corner.
@Wags132456
7 жыл бұрын
where did you get the Chinese nock offs
@jamesmiller3647
6 жыл бұрын
Just got one was very worried about it being a fake lucky for me it's not Blade.hq always sells real knives that you can trust
@lesgarten
6 жыл бұрын
Indeed, Knifecenter as well. GPKinives as well
@lesgarten
8 жыл бұрын
+David C Not true, Some real boxes have a lot of variability in the "nose" small and large, and there are small and large in the clones. I've looked closely at 50 or so real boxes and the same amount in clones. It's tea leaves my friend. You cannot use that as a criteria for anything.
@brunosm159
8 жыл бұрын
Hello friend, my name is Bruno and I am from Brazil. I have 2 CRKT and Byrd cara cara 2, original, and won gift a false Spyderco. I would like to know your opinion, if it would be safe to use it in simple everyday tasks or should I just leave it as garnish. Grade hug! (descupe by the English pessimo am using translator)
@lesgarten
8 жыл бұрын
+Bruno Which False Spyderco? Like the Para 2?
@brunosm159
8 жыл бұрын
+ Les Garden spyderco paramilitary 2 black
@lesgarten
8 жыл бұрын
+Bruno SM I would use the hell out of it. I would not take it apart unless you must to repair it. You maybe should adjust the pivot screw tension only if it needs it to make the knife blade move well. It may be fine and not need any adjustment. My Para 2's that were fake were pretty good knives. The fasteners that hold the handles are soft metal though.
@brunosm159
8 жыл бұрын
+Les Garten Thanks for the advice! You can not imagine how in Brazil, products made in USA quality has a high price. The value of an original paramilitary today is what my family spends to live in two months. Always wanted a Spyderco and I was presented with this fake. Thank you and have a great week!
@lesgarten
8 жыл бұрын
+Bruno Glad it helped!
@messmeister92
8 жыл бұрын
Have there been any fake sprint runs? I picked up one from Amazon with S35VN, not from Amazon itself but from a fairly reputable US dealer. I have no reason to think it's fake, but it's always a worry.
@lesgarten
8 жыл бұрын
+messmeister92 I've never seen them do a Sprint run. They usually just kit the most common.
@messmeister92
8 жыл бұрын
Thank you!
@notdirtyflics1067
5 жыл бұрын
Do they have the same action does the blade sharpen and dull about the same
@lesgarten
5 жыл бұрын
Action was very close. Didn't cut with them or sharpen them.
@notdirtyflics1067
5 жыл бұрын
@@lesgarten thks
@ReadyAimFire_
5 жыл бұрын
I have just bought this knife, im watching this vid and comparing things, seems like i have original one. Thanks for this video.
@lesgarten
5 жыл бұрын
Good Deal, thanx!
@986C
4 жыл бұрын
Stop buying shit from your buddies like a 10 year old and buy from an authorized retailer like an adult. Unless you are 10....
@5quig
7 жыл бұрын
You can feel which is which because the clips are not in the same spots
@robmata474
8 жыл бұрын
just bought a fake at a gun show ,mine had a Black Blade handle scales we're not correct but the thing that gave it away did a few cuts on a piece of cardboard and the steel went from hair shaving Sharp 2 dull and would not cut paper. took it back and exchanged a new one ,also the Box was missing the point on the spider.
@Mastermind4111
7 жыл бұрын
The blade material looks to almost be identical is the fake made from CPM S30V?
@lesgarten
7 жыл бұрын
Naw, they usually use something like 8CR13MOV, D2, or something along those lines. Spyderco uses 8CR13MOV in a lot of their lower end knives like the Tenacious. The cloners are just copying the marks.
@maximusgrigo3962
8 жыл бұрын
I got my Paramilitary 2 this morning and I thought is was fake because the screws looked cheap and busted. Turns out it's real. I love it so far.
@lesgarten
8 жыл бұрын
The screws on the real Para 2 will appear strange at first because they are kinda tapered to facilitate insertion of the torque wrench. But the wrench goes in and locks in much better on the real Spyderco screws than the seemingly better appearing clone screws that are EXTREMELY soft and not very accurate in their sizing. If you look at the spyderco screws under magnification, at least 10x or so, they will look at lot better to you.
@erumscho659
6 жыл бұрын
Some of the "fakes" are just knifes that didn't pass inspection for minuscule reasons and get sold to the second market. But as long as the steel is the same you can find great deals on these knifes.
@lesgarten
6 жыл бұрын
That may be true of some fakes. But it is not true of Spydercos. I've had a lot of Fake Spydercos in my hands and they are not seconds.
@chaseperkins5487
6 жыл бұрын
The barcode is not consistent neither of the boxes I have touch the numbers and they match in appearance. I have two Manix 2s the Blurple G10 s110v which came from BHQ so obviously reputable, and a standard black G10 which I ordered off amazon. I sent the black g10 in to Spyderco for warranty service with the box and was returned to me with no issues.
@EverestSALE
2 жыл бұрын
Svaka čast, potrudio si se maksimalno da uporediš detalje. Jedini je problem što nisi naveo koja je razlika u funkcionalnosti. Ko kupi Paramilitary 2 kopiju, verovatno će se smejati onima koji imaju original. Ja nisam video razliku u tome čemu može da posluži ovaj komad čelika, bio on original ili kopija. Glupost je gledati ivice drške, da li su zaobljene ili ne i sve ostalo što ste naveli. Veliki pozdrav i svako dobro.
@lesgarten
2 жыл бұрын
You have misunderstood why I made the video. It was mainly for people to determine whether they had bought a Genuine Spyderco or a Fake Spyderco. Secondary was my wish to show quality as well.
@EverestSALE
2 жыл бұрын
@@lesgarten Savršeno sam Vas razumeo. I duboko sam uveren da onaj koji kupuje kvalitetan nož, već zna sve o njemu. A naivnih svakako da ima. Pozdrav i svako dobro.
@neilchavanarorkrat4093
3 жыл бұрын
Genuine
@1MeowNow
7 жыл бұрын
I'd like to know the weights of each, please?
@lesgarten
7 жыл бұрын
That was a while ago and I no longer have the Clones. There was no appreciable difference in the weight though.
@pesticidecarts9300
4 жыл бұрын
Actual review 6:46
@truth-Hurts375
Жыл бұрын
Lets be honest with each other.The clones are better value for money than the original ones !!!😉😉
@SmokeRingsPipeDreams
7 жыл бұрын
26:30 ... it seems that comparing both blades that in the real one you can see the horizontal grind line continues on the outer part of the hole. But on the fake it does not. (it might be a trick of the light though)
@lesgarten
7 жыл бұрын
Doesn't really help though. They are all ground by hand, no two will be alike. I usually try to find things that are reliably different.
@SmokeRingsPipeDreams
7 жыл бұрын
I thought I was on to something, but it wouldn't be the first time (or last) that I was full of beans! ;)
Пікірлер: 538