You have absolutely no idea how much I appreciate this video, I have wondered how those knotters work since I was a kid.
@denniscarter483
3 жыл бұрын
Me too. When I was a kid I got tie some of the nails when the knoters would mess up.
@BLYFACTOR
3 жыл бұрын
Theres a video on this entire process on KZitem look up old allis baler knotters 2nd video down 11 minutes
@austinwagoncompany
13 күн бұрын
Me too
@vopenacattleco
3 жыл бұрын
I hated working on the knotters, but was very satisfying when you got all that hay in each year. My advice, burn the bailer down each year and get a new one.
@86lowrider
3 жыл бұрын
The thing that’s really interesting to me anyway, is when this was first invented it was done with a pencil on paper. No CAD no computer just an 8-5 guy with a peace of paper and a pencil. Engineer plans drawn, molds made, cast and machined with no computers. Today? Can’t make change.
@arthurdewith7608
Жыл бұрын
Omputers have to be given instructions on how to make this slip knot and the mechanical pieces are drawn out on cad by a human using mathematics geometry now what is ur point again?
@86lowrider
Жыл бұрын
@@arthurdewith7608there where no computers when this was made none!! That’s my point! No cad, no computer, just paper. If you don’t understand or you think that cad capable computers have been around a 100 years you’ll never get the point. 🤷♂️
@arthurdewith7608
Жыл бұрын
@@86lowrider u do not need a computer just a helpful wife to turn the fly wheel
@86lowrider
Жыл бұрын
@@arthurdewith7608ok🤷♂️
@jonathansullivan3089
14 күн бұрын
I have wanted to see that for 40 years, I use to follow the bailer as a kid to keep bales from rolling down the hill before I was big enough to bale, I watched with amazement, it happens faster than a blink of an eye. Thanks for posting.
@ralph5450
3 жыл бұрын
I got one that's so old this is actual speed.😬
@cast_iron_fist
2 жыл бұрын
That's about 40 years old solution. Imagine how clever was the person who invented it. 👌
@danw6014
Жыл бұрын
More like 140 years.
@Rio97621
7 жыл бұрын
This video saved my hay crop today! I took a similar video of my JD468 non-knotting and found that the wiper was not pulling the knot from the billhook thing. I moved the wiper tighter against the back of the billhook and all is well. Thanks for posting this as this part of the mechanism is really hard to see.
@brian_2040
3 жыл бұрын
Most of the time, it's always the wiper not doing its job perfectly. Ol mechanic once told me, grease the machine first, if that doesn't fix it, then make sure everything else is right.
@ajgurney5811
8 ай бұрын
Called a knife arm that wipes the billhook
@christinamoneyhan5688
8 жыл бұрын
These knotters still amaze me. Could watch it continually ,hard to even comprehend the engeneering and thinking that have gone into the design of this mechanical wonderment at the time it was developed, and it is still in use with only a few minor improvements. Great video. Thank you for sharing it. Should help a lot of people understand the operation so adjustments or repairs to there equipment can be made.
@tismeog
3 жыл бұрын
Muster und Farben von
@tismeog
3 жыл бұрын
But I am sure you will find a goodfriend that you can use get job in your area that you can be proud a good the next and next step iworld in a way that s to get a job ininfor and a good job to get a job in t. man thing thing man e eyes of help be a the you areand is ja auch schgreat great und ich bin nicht mir hübsch aber on ein paar Jahre her undich es war einfach nur hat sich schon letzten Wodie so Jahre verändert gemacht und ich es ist auch kommt immer wieder wieder her damit die ich Zeit habe und das ich mir die Zeit nehmesollte und und das iich auch schon schon ch mirfan of aucmeinem I am not a h am liebsten einmal seit big Jahren in der and the other is Jah the thing that can ismake it to the ren die ich in number number nutlikely and nway ot athe in the same way eyes same way to get a better hold on as the onein will is not just that has been ispast past the the lasplace game of all a big of a its favorite game of year timnext next to the number of e going to going to a movie time and the t. I to bthat is thepeople in the eyes of the man that who loves is his favorite thing to do then then the lord wilIraq and by the way he loves is is the only thing I have ever seen seen I will we be the first l be and only win the fact that aand will is not yet to be seen in nd he is not the only onfriends of his way e who can make his ay I could get a good feel for the next e in a good place game gamam not things I can e and of all the new years game with the the head inthink have it the for it sinas you gle one or he more often will than the cayear of his face and the how for the next n see ost mfor ber one of en neuen PC zulegen zulegen muss n wieder zu mit Problem Problem wenn ein mkommtnicht mehr es es an schön chen bei mir im die einigBüro gemacht und es getan verändert sich hat nicht the sithe are a s a girl who was chöne neue schöneest only can lord and the the eyes inget a good place for for to a business that is
@tismeog
3 жыл бұрын
Ich habe die Mail bekommen und bin jetzt auf der Suche nach einem
@tismeog
3 жыл бұрын
Muster für eine neue Wohnung Wohnung in der Nähe von Bad und finden und und is und Küche im Bund der mit dem ad Haus was wir Sie für Ihrenot a Euro können Sie in den unserem Unternehmen Shop erhalten Sie als Kunde Kunde Verkäuferbestellen bei und füneigenen Produkte und Dienstleistungen für dig können uwunserem Angebot. und bestellen Sie Ihre Nähe von erden von uns aus der nd Wohnung finden wollen
@katadam2186
11 ай бұрын
Mennonite New Holland Pennsylvania
@lcvt8023
3 жыл бұрын
Thanks so much! This has been one of my life mysteries for many years.
@motorcyclemichael2182
3 жыл бұрын
Imagine the engineering that went into this machine because the farmers kids kept complaining their fingers were sore
@frostedlambs
3 жыл бұрын
You mean there fingers were cut off
@SBS_Auto
3 жыл бұрын
No he meant THEIR fingers were sore
@craighall6468
3 жыл бұрын
Ah yes I'm 16 and still have that problem
@sonsofliberty3081
3 жыл бұрын
The didn't tie them. They mowed the field with a horse pulling a sickle mower. After it sat a bit to dry, you go over it with a rake, again pulled by the horse. The rake turns it over to dry evenly. Then you go over it with a wind row. It takes say a 12ft wide row, pulls all the hay into the middle so now it's a 30" row. After you have your rows made, you go by with a wagon and "the kids" fork it onto the wagon while it is loose. Get it back to the barn, and you have a pulley overhead outside the front door that you lift up the hay, and run it on a track to the back of the hay loft and fill it up. Usually you'll have a trap door in the floor so when you need to use it, you drop it down to the 1st level.
@Jan_372
3 жыл бұрын
Well, the guy who invented it apparently saw his dog make a knot into a rope where its got caught in. He combined that shape with the way a sewing machine works.
@gasgiant7122
3 жыл бұрын
Who th f@@k could sit down and design something like this? Genius!
@haweater1555
2 жыл бұрын
en.wikipedia.org/wiki/John_Appleby_(inventor)
@katadam2186
11 ай бұрын
Mennonite in New Holland Pennsylvania
@jamesbarbour8400
Ай бұрын
@@katadam2186 James Appleby
@MikeM-ne1hk
3 жыл бұрын
These are the background sounds in every horror film
@BeingMe23
2 жыл бұрын
If the knoters didn't tie properly. I am afraid you would have a mess of bales in the field.
@rickmakovsky4373
3 жыл бұрын
After farming for twenty five years I sure wish I could have seen this at the start it sure would have made my life easier trying to adjust knotters that I never really understood but finally seen how they actually work!!! Thanks
@arthurdewith7608
Жыл бұрын
Ur wife turns the fly wheel by hand and u sit ther looking at the mechanics of the knitter and it all reveals itself
@rickybobby1975
3 жыл бұрын
I'm a mechanical designer former farm boy. The genius that went into that mechanism is outstanding. All done in 2D on paper and a lot of imagination.
@kfossa344
3 жыл бұрын
Watch your damn mouth
@katadam2186
11 ай бұрын
New Holland Pennsylvania
@ajgurney5811
8 ай бұрын
@@katadam2186this a krone baler which is a rip off of the Heston knotter
@hammaswingah1693
3 жыл бұрын
Brings back a lot of memories tying crappy incomplete knots on dad's JD T14. It usually took tripping it a couple dozen times till the sisal twine polished the bill hooks enough so that it worked right. After that it was generally OK.
@goliathprojects7354
3 жыл бұрын
I wonder how Claas came up with this shit so long ago. I wouldn't know how to build such a thing
@danw6014
Жыл бұрын
They were used on grain and corn binders long before Claas.
@arthurdewith7608
Жыл бұрын
Such a simple knot used by many and taught early
@jamesbarbour8400
Ай бұрын
Claas did not come up with the twine knotter, it was an American, James Appleby, who conceived it more than 100 years ago !
@jonnyeisenhardt4910
3 жыл бұрын
I love the slow motion sounds!
@coinucopia
3 жыл бұрын
This is the kind of knotty video I enjoy!
@spinningchurro
3 жыл бұрын
Not the kind with dogs, right?
@finaldrivetv3669
3 жыл бұрын
Some guy layed awake so many nights at his house figuring out how to do this
@randalllastname4509
3 жыл бұрын
Pretty cool, thanks. Now i don't have to take one apart to see how it works 😂
@ericcarrell7600
3 жыл бұрын
Why does this sound like some old dungeon torture chamber?
@BeingMe23
2 жыл бұрын
Because it's a living hell tying your own knots on bales of hay! 😈
@darrelfuhrman8217
3 жыл бұрын
I wish that I could of had this video about 1990. 30 years ago! I was working on a New Holland 285? baler that someone put together wrong! I had to fix it. Most everyone had round bakers then, with a lot of calls to dad, neither one of us had a bag phone yet. I got the knotter fixed, all 3 places back in time, making wheat straw bales perfectly. All done with out a manual, would have been a lot simpler and easier with a manual, or now an iPhone to look up information on. Hello from north east Montana!
@bigcharliesmodelgarage296
3 жыл бұрын
Square knot. Right over left and left over right. Cool video. Thanks for sharing
@danstark462
Жыл бұрын
The coolest, ingenious technology ever made.
@leosypher9993
3 жыл бұрын
Oh God I'm having flashbacks to my custom baling days, I thought I was done with these damn things See that grabber thing? Its called a billhook, break a few and you'll see why there the stuff of nightmares
@ajgurney5811
8 ай бұрын
I'm a Heston baler and swather mechanic billhooks are easy to change
@ronaldduwaynebrown8071
3 жыл бұрын
Ran a 348 twine baler for years good baler
@alanfisch6912
4 жыл бұрын
Wow best slo mo video of knotting I’ve ever seen
@cmulli5637
11 ай бұрын
One of the only inventions to have not been re done. The all original deereing knotter still used on all new balers.
@jamesbarbour8400
Ай бұрын
It wasn't invented by John Deere or International Harvester, it was a chap called James Appleby, and to the best of my knowledge, Binders apart, New Holland were amongst the first to use this on their earliest balers. Prior to that, at least some balers had a person sit each side of the bale chamber to tie off the knots.
@uralbob1
3 жыл бұрын
We had a Case baler, and that machine knotted twine like a champ. We put up 3-4000 bales a year.
@emblemshop
6 жыл бұрын
My son is doing a presentation on baler maintenance. May we download your video for use in that project?
@SJNFAB
3 жыл бұрын
DAM MECHANICAL GENIUSES! 🤯
@sunshine_water5139
3 жыл бұрын
So complex but yet so simple! God bless our American farmer🇺🇸
@mrearly2
3 жыл бұрын
Yay! For the small farm farmers.
@trulysurprised-bk7cy
4 жыл бұрын
And to think, nearly the exact same thing since the beginning.
@BeingMe23
2 жыл бұрын
The knotter device was issued with patent No. 372140 in 1921, as the very first patent of Gebr. Claas.
@asternweg1
11 ай бұрын
Wow! More than 100 years ago
@brianvosburgh1720
2 жыл бұрын
So cool. Always wondered.
@ericrisch9616
3 жыл бұрын
So that’s how it ties a knot. I’ve been square baking for years n never really understood it
@hubbard665
3 жыл бұрын
I always wondered how it was done thanks.
@jonburbridge2968
3 жыл бұрын
Need to hit dem grease fittings man
@ronniewilliz153
3 жыл бұрын
That one that's In view has never been touched lol
@jamesbutler1862
3 жыл бұрын
Wow that's amazing
@HyenaButter69
3 жыл бұрын
I just came in my overalls.
@matsgranqvist9928
3 жыл бұрын
There's help for that nowadays ya know
@joemueth4077
3 жыл бұрын
Gotta love them Deeres.
@swayzocrazo4398
3 жыл бұрын
I can only imagine what they went through to make this
@thomaserixton4662
2 жыл бұрын
Crazy how since the time of the first horse-drawn grain binders till today the action of the knotter hasn't changed one bit
@connerbruggeman6562
3 жыл бұрын
Nice baler john deer
@Andomosity
3 жыл бұрын
Wow, makes me wish my baler actually tied the bales more often. We have days that every 6 bales doesn't get a string tied
@andrewmx2586
3 жыл бұрын
Just think all of this has to happen before that big heavy plunger comes back too. Stuff is amazing
@ericm.3791
3 жыл бұрын
I believe there is a clutch that the knotter trips that disengages the plunger while the knotter is engaged.
@denniscarter483
2 жыл бұрын
Sure don't want to get a nailer out of time .
@RomanCansecoarroniz
Ай бұрын
Esta muy vien nesitamos aprender del sistema
@pergidrolwhite7635
3 жыл бұрын
Нихуасе узелковязатель😱😱😂😂👍
@tom7maudin
3 жыл бұрын
Wow a machine that ties better than me
@gognaz
3 жыл бұрын
Cool design
@vajkfekete2635
8 жыл бұрын
This is soo cool! Thanks for the video!
@nickblackwell7486
3 жыл бұрын
Had my share walking behind 1 picking up loading stacking in a barn our barn every summer
@joemueth4077
3 жыл бұрын
And that's why I need new knees.
@neetlikitkhom266
3 жыл бұрын
The best 👍
@cheechU38K
3 жыл бұрын
So satisfying 👌🏼
@BigCool95
7 ай бұрын
That zerk fitting could use some grease. Still got paint all over it.
@jagdeepmaujgarh8822
3 жыл бұрын
Very nice videos
@jdhill4
5 жыл бұрын
I watched this video at quarter speed.
@redlinemotorcars2184
Жыл бұрын
Did a few hundreds of those today
@JohnDoe-zw4nl
3 жыл бұрын
It’s that the kobota?
@sourbrothers73
3 жыл бұрын
Why tf do people post slowmo videos without showing it again in real time? You need to give a frame of reference...
@529alex
3 жыл бұрын
People dont need to show it in real time quit being lazy and just look up a video of one 🤦
@sourbrothers73
3 жыл бұрын
@@529alex are you dumb or just stupid?
@carterbowe9964
3 жыл бұрын
@@sourbrothers73 huh
@p92sahm
3 жыл бұрын
@Sour Brothers At full speed, the knot is tied in the time between strokes of the baler, which can be approx 80 strokes a minute for a small baler, and approx 48 for a large baler so the knot is tied in less than 1.3 seconds at full speed. Literally too fast to observe. I've tried when I've been trying to fix my baler........
@davidvickers8425
3 жыл бұрын
Just play it at 10x
@VQAS
3 жыл бұрын
روعه صناعة راقية جدا جدا
@krrrruptidsoless
3 жыл бұрын
Must have been someone's nightmare until they realized it..
@oliver69cork46
3 жыл бұрын
Genius
@waylonlegend4603
2 жыл бұрын
Those engineers had to be on acid to design the square baler. So many functions
@michaelosgood7908
3 жыл бұрын
Cool
@frankymatano6671
3 жыл бұрын
Great engineering
@Meownold
3 жыл бұрын
Thank you! Now I can die.
@Robert-fu2pe
3 жыл бұрын
Snopo-wiązałka. Maszyna rolnicza do wiązania sznurkiem zboża w trakcie koszenia.
@kacper9676
3 жыл бұрын
W sipmie jest jeszcze maszyna losująca: zaiwąże czy nie zawiąże
@justinmartin8887
2 жыл бұрын
Nice
@sethfoulk6990
3 жыл бұрын
Whoever patented it first probably a trillionaire by now!
@moisesrodriguez4427
3 жыл бұрын
Tanto engranaje para hacer un nudo de Mecate ? Lo puedes hacer con las manos sin tanta complicación 👌
@MilkMan608
3 жыл бұрын
John Appleby invented and patented the knotter in 1878 in Mazomanie, WI
@DanaKotze
3 жыл бұрын
Can you believe that👍
@dpaulo3836
3 жыл бұрын
Tudo isso pra dar um nó?
@zachmoerman4165
3 жыл бұрын
Didn’t seem slow mo to me, but really cool
@RohitKumar-bj7me
9 ай бұрын
❤❤
@user-rt4uj3wr3n
3 жыл бұрын
СЫРНАЯ КОСИЧКА ШТОЛИ😀
@baertschiideere
3 жыл бұрын
What for a brand /type of baler is it? Tanks for the answer
@goodrichfarms8795
3 жыл бұрын
John Deere, 468 I think
@baertschiideere
3 жыл бұрын
@@goodrichfarms8795 468 is a round baler
@goodrichfarms8795
3 жыл бұрын
@@baertschiideere I don't really know their balers, sorry
@100cesarin
3 жыл бұрын
Mor video of a 336 please!
@SnowingNapalm
2 жыл бұрын
nice
@cawacyr3920
6 жыл бұрын
Истертый клюв не всегда освобождает нить.
@margvelion
3 жыл бұрын
Некое древнее существо пробудилось и колдует во тьме...
@chiva2222
11 ай бұрын
Could you film it in slow motion?
@mitchringel4270
3 жыл бұрын
Think I have this same baler. 24T?
@EhsanEntertainment-np9ov
3 жыл бұрын
Very nice sslv please
@Fergus-ns7cj
3 жыл бұрын
this is not slow mow this is cranking the flywheel and tripping the knotter 🙃😅
@ralph5450
3 жыл бұрын
It's motion is still slow.
@agricultureimpliment9525
Жыл бұрын
👌
@jgaming7219
3 жыл бұрын
Damn wanted to see that my whole life
@benjaminkline4855
3 жыл бұрын
So it's knotted up inside... Yep it's stuck
@maheshbhanage3826
3 жыл бұрын
🔥🔥🔥🔥🔥🔥🔥
@CheddarCheese1984
3 жыл бұрын
Kinda spooky
@dannygarden464
3 жыл бұрын
I can almost bet anything that is a John Deer. :) Or to be safe the color John Deer.
Пікірлер: 199