GM quadra jet carbs are tough and easy to tune, as long as the throttle shaft bore isn't egged out. The square body Chevy is a beast of a work horse. Easy to modify to suit your needs. Good to see you working on more than just Ford's. Keep up the great content.
@misfittoys8883
Жыл бұрын
I dont know what Aaron plans on doing with the quadrajet but throwing it out was not an option for him!
@Shadetreehack57
Жыл бұрын
I hate that I started showing my dad these videos, now I gotta wait till he gets home to watch it. I'll pre like it though.
@misfittoys8883
Жыл бұрын
Enjoy all the time you can with your Dad. I miss mine
@Shadetreehack57
Жыл бұрын
@Misfit Toys it's hard to do that with work and stuff, but it's always nice watching videos. He's a fan of you and even my mom likes ya. Definitely gonna have to show them more of you. Especially the Ford you did one of my favorite videos.
@davidcolesr.8628
Жыл бұрын
@@misfittoys8883sorry for your loss, May He Rest in Peace
@davidcolesr.8628
Жыл бұрын
It’s already Obvious Dad is Proud on Account He has Done a Good Job Raising a Stand Up Son & it’ll do your Heart Good later in Life, I’m sure of that.
@randyriggs5463
Жыл бұрын
I would like to see more on this truck. Get it running good,and give it a bath! I see potential!
@georgevan3102
Жыл бұрын
Me too
@craigbowley6783
Жыл бұрын
It's never too late to change for the better.
@jamesmadison47
Жыл бұрын
Fix your vacuum leaks before you try timing it. Then adjust your carb.
@kennethsonier1766
Жыл бұрын
The square body looks to be in fairly good condition, the engine sounds all right also. Looking forward to seeing future repairs. Keep up the good work guys 👍✌️🇺🇲
@misfittoys8883
Жыл бұрын
Pretty decent truck for free!
@user-ht1xu4gv2u
6 ай бұрын
GM. Hei. Came. Out on late. 1974. :callilacs
@user-ht1xu4gv2u
6 ай бұрын
Needs ign 12 volts to run off HEI
@joshjablonicky171
Жыл бұрын
Oh hell yeah this is going to be a good one. They all are don't get me wrong. One thing that I really liked about your channel is a variety of things you working on it's not like a lot of other KZitemrs who been stuck in the Rut the only doing will it run videos it gets old like to see you work on your own rigs in your own stuff and then some other stuff here and there. As always thank you for the hard work you put into the channel for us it is greatly appreciated.
@misfittoys8883
Жыл бұрын
Revivals are fine but arguably pointless if you dont do something with the vehicle after getting it going again in my opinion
@meangreen7322
Жыл бұрын
Good job getting the old square body going👍looking forward to more videos on your adventures
@misfittoys8883
Жыл бұрын
I look forward to putting them out for you.
@timothyboyd7266
Жыл бұрын
One thing about working on those old trucks is if you don't have a bad back you will after reaching over into that dog house lol
@leegoldeneagle9003
Жыл бұрын
Very nice work nice to see this one going again thanks 👍 Lee ps. Hello
@THROTTLEPOWER
Жыл бұрын
Great vid!!!!!!! 👍👍
@galenrichard5706
Жыл бұрын
Nice truck it looks a like a good find
@paulloranger545
Жыл бұрын
They were thinking, full time is awesome and they were correct.
@misfittoys8883
Жыл бұрын
Thems fightin' words!!
@donaldhalls2189
Жыл бұрын
Not a bad find, looks less work than some I've seen, all the best to yous and your loved ones
@speedybuggy1677
Жыл бұрын
Runs pretty good sound good fix it up and drive it use it for work truck are driving down and back it's got potential
@cdb1949
Жыл бұрын
I have had 3 np203 that I just took the none lockout hubs out and replaced with lockout hubs. Been working for years that way. Driveshaft does not spin in 2wd. Luckily you had a great np205. Mine drives great down the road and with the lockouts it does not wear the front out. Just wanted to tell you all.
@nwolf7117
Жыл бұрын
Chevrolet's High Energy Ignition (HEI) from the Delco-Remy Division of General Motors was first offered in 1974 on production cars, though in very limited numbers. In 1975, HEI became standard on all GM vehicles.Mar 5, 2019
@twinkie27271
Жыл бұрын
HEI was standard long before 2019. Not sure where you got that info. I'd say, probably 1979.
@chrisdiessner2835
Жыл бұрын
That glad u got her running all the old chevy that I get out of the sandhills first thing I have to get new. Is starter fuel pump and cap. Make sure u check the trans case oil😋
@misfittoys8883
Жыл бұрын
Ditching the 203 t case for a good ol 205
@twinkie27271
Жыл бұрын
@@misfittoys8883 and lockout hubs.
@fredbrooks6488
Жыл бұрын
Good one guys
@Oldfarmersgarage
Жыл бұрын
I have owned three squarebodys in the four years that I have been driving and two of those were full time four wheel drives. I have never had a problem with it before. Not sure why they get a bad wrap but I’ve taken them through some rough terrain and pulled with them and Even went 105 in one of the trucks. But I still wish I could do a burn out or do doughnuts. Got a neat truck there. Hope she serves you well.
@misfittoys8883
Жыл бұрын
Full time 4x4 put unneccesary wear on components and eat more fuel. The 203 is a beefy unit, but I have witnessed some of them slipping chains when used hard.
@Oldfarmersgarage
Жыл бұрын
@@misfittoys8883 yes they definitely eat fuel. Lol. And I am going to get a 205 at some point.
@jasonpetrich4141
Жыл бұрын
And that is vacume advance it goes down to the trans if you don't hook it up, it will only have 1st gear. Ditch the Quadra puke put an edelbrock. Save time. Base settings runs perfectly. Glad you saved it she's nice
@twinkie27271
Жыл бұрын
Vacuum advance has nothing to do with the transmission. Vacuum advance is in the distributor. That is the vacuum modulator valve, and yes, it has to be hooked up, but not necessarily through thermo vacuum switch.
@twinkie27271
Жыл бұрын
Quadrajet is a very dependable carburetor. They mostly just have issues with the bowl plugs leaking. Easily repaired with a little epoxy.
@jasonpetrich4141
Жыл бұрын
@@twinkie27271 nope boat anchor that's all there good for never seen a good one period
@ronjones1077
Жыл бұрын
I thought Ford mechanics had the largest assortment of special adjustment tools in the industry. More hammers than a metal working body man! Just joking, I’ve got em all, Fords GM Mopar and off shore. Over 50 total. Mine are all up here in Alaska I’ve got about half of them running, but at age 73 I’m running out of birthdays to get ‘em finished. Oldest is a 1936 front wheel drive Cord Westchester. Take care and I just subscribed.
@twinkie27271
Жыл бұрын
Better hurry, you only have another 30 years in you! Seems like quite the collection! Fun stuff!
@engineprojects
Жыл бұрын
I wish there was footage of them getting it out of the forest seeing how it stood there it always starts whit the car on the trailer thats the only thing what i missed but nice vid getting it going again👍👍
@misfittoys8883
Жыл бұрын
We definitely should have. Almost everything went wrong! Only goid thing that happened was that not a single brake was stuck!!
@pricetag30
Жыл бұрын
You sound more like Nicholas Cage more than Nicholas Cage!
@jarrodrodriguez8958
Жыл бұрын
Glad someone else caught on to that lol!
@francoisbouchard602
Жыл бұрын
Good.jop 😃😃👏👏👍👍cool
@kimber1958
Жыл бұрын
NICE
@mattbrown5511
Жыл бұрын
This Mississippi transplant from Indiana will take whatever trucks you "Ford Boys" don't want. I'm not brand snooty. I love all 4X4 vehicles made in USA.
@justinjames7848
Жыл бұрын
Bill Paxton being a narrator be like
@pfpdlt
Жыл бұрын
I'm a Ford guy to but if a sbc will rotate it will run (probably not well). Here's to watching the action
@misfittoys8883
Жыл бұрын
I have seen quite a few SBC revivals where people put WAY more time and money into getting them running again than I would be willing to do
@rollinthatcoal
Жыл бұрын
Ive been looking for a old car like that to drive back and forth to the bus stop
@rooseveltdumas304
Жыл бұрын
You got to keep the cadi.
@RattleTrapGarage
Жыл бұрын
I'll take it
@erscustoms911
Жыл бұрын
That spider 🕷️ though lol
@misfittoys8883
Жыл бұрын
Bet he was juicy one when it was alive!
@twinkie27271
Жыл бұрын
It was just a shell where it shed it's skin.
@j_b_c_podcast
Жыл бұрын
My dad bought a Chevy square body that sat for 19 years and I turn the key and it cranked right up but the ford beside it never started
@misfittoys8883
Жыл бұрын
Yay??
@twinkie27271
Жыл бұрын
If they'll crank, they'll usually run. Ford, Chevy, Dodge, or Edsel.
@BUILTFORDTOUGH79
Жыл бұрын
Can someone list the proper bulb replacement for the “spark do bobber on-er” 😂
@richardoswalt1009
Жыл бұрын
An automatic transmission uses automatic transmission fluid???
@christophertehan5364
Жыл бұрын
Narrator sounds like Nicholas Cage.
@kaseyjohnson3156
Жыл бұрын
Being a ford guy, you my guy underestimate the power Chevy…back then they made them to last
@bernadettegarbers9552
Жыл бұрын
I think you need to put on sum frash lucite tape on. Your gas line.....
@achecase
Жыл бұрын
"Distributer inspection portal " is a dwell adjustment portal .
@misfittoys8883
Жыл бұрын
Thanks for the info
@douggrove762
Жыл бұрын
I am a Ford guy.
@redneckbryon
Жыл бұрын
It's a Chevy not a Ford, the only fire you need to worry about is in the cylinders.
@daveunbranded
Жыл бұрын
You probably should have fixed that giant vacuum leak
@misfittoys8883
Жыл бұрын
We did eventually
@73xlh
Жыл бұрын
Not bad for a couple of ford boi's
@misfittoys8883
Жыл бұрын
Aaron is mostly a GM guy. I am definitely Ford oriented though.
@twinkie27271
Жыл бұрын
Explains you thinking you were retarding the timing.
@slowshedgarage7409
Жыл бұрын
6 weeks til a swap meet. Oh man yeah.
@JAGacp45
Жыл бұрын
At 13:35 he totally said yep or it was the funniest nope I ever heard
@twinkie27271
Жыл бұрын
He said yep, no.
@stevenberlinsky3550
Жыл бұрын
add a fuel tank to it save time
@boronin10
6 ай бұрын
Im 100% ford guy myself but i like tinkering and working on them all.
@misfittoys8883
6 ай бұрын
Mechanical principals are the same no matter what brand you are working on
@willscott85
Жыл бұрын
33 seconds in and i agree, what the HELL are you doing with a square body
@misfittoys8883
Жыл бұрын
What is life without trying something different occasionally?
@willscott85
Жыл бұрын
Would be a fun wheeling rig.
@DependableAutoTruck
4 ай бұрын
FIX THAT BAD VACUUM LEAK AND IT WILL RUNN BETTER!!!!!!!!!!!!!!!!!!!!!!!!
@kelldog2555
Жыл бұрын
I like the content and very enjoyable. If you were not so “ANTI-GM” I would be a subscriber
@misfittoys8883
Жыл бұрын
Not shure why you are getting an anti-GM vibe? I am definitely a Ford enthusiast but I outgrew the attitude of having to hate on GMs a long time ago. There actually is a late 60's Chevy wagon on my marketplace watchlist at the moment. I just cant logically justify it at the moment.
@packnplay
Жыл бұрын
“I’m not a GM guy” count = 99999
@misfittoys8883
Жыл бұрын
I'm not a GM guy! I did it! 100000!!
@craigbowley6783
Жыл бұрын
You can't kill a Chevy small block! They just wanna live!
@twinkie27271
Жыл бұрын
You been talking to Mortske?😅
@richarddavis3007
Жыл бұрын
Tap on carb
@robertsmith20022
Жыл бұрын
Lmmfao let's see tesla pull this off after sitting for 15 years 🤣. #AMERICANMUSCLE 💪💪
@CPthetooladdict
Жыл бұрын
The best part was when you fellars said "it's alive from its grave" you just mocked every 20-something youtuber doing revivals and acted like they just turned water into wine and it was mint!! Lmao
@misfittoys8883
Жыл бұрын
Thats exactly what we were going for!!
@donaldyonker6950
Жыл бұрын
Sucker runs better than a daily driven ford
@johnoneill9539
11 ай бұрын
Who's the guy constantly whining!
@misfittoys8883
11 ай бұрын
Me, most likely
@user-427.commodore
Жыл бұрын
Man what a truck, an i will never own one lol 25 k + in Australia for a descent one
@misfittoys8883
Жыл бұрын
I fail to see why they have went crazy in value here. It's not like the supply of them has dwindled. They are all over the countryside here.
Пікірлер: 109