Sr20de hydraulic lifter servicing and explanation. How to clean old lifters (lash adjusters), flushing, and bleeding. Often times it is very easy to confuse chain clunk with lifter tap on older Sr20de engines. This video is specific to the majority of these motors that came with a hydraulic lifter assembly. Before installing serviced lifters, be sure to bleed ALL of the air out of them before reinstalling.
I would also recommend that in the process of bleeding extremely dirty lifters/lash adjusters, that you start off using Kerosene instead of clean motor oil for servicing. This will ensure carbon deposits are cleaned out even better inside the assembly. You should drain all Kerosene before bleeding the lifters with clean oil, then reinstalling into the engine.
I recommend this service between every 75,000 through 100,000 mile intervals and depending upon how frequently the engine oil is changed on your vehicle. The Nissan FSM's recommend reinstalling the lifters full of clean engine oil and free from any internal air.
Parts you may need:
SR20DE FWD Valve Cover Gasket : www.amazon.com/gp/product/B00...
SR20DE FWD Replacement Lash Adjusters : www.amazon.com/gp/product/B01...
Негізгі бет Автокөліктер мен көлік құралдары Sr20de hydraulic lifter / hydraulic lash adjuster - service flushing and bleeding - explained
Пікірлер: 34