Great product , I’m running the SMB in a 10.5 AR pistol and it’s amazing !
@mid305
7 ай бұрын
By any chance did you run it suppressed ?
@coloradoguns
7 ай бұрын
@@mid305 unfortunately I can’t afford a suppressor. Maybe in the new future if it’s still an option
@homevalueglass3809
7 ай бұрын
Yo, what caliber and what buffer weight?
@LV_223
4 ай бұрын
@@homevalueglass3809 I run the SMB H2 with my 10.5" AR pistol in 5.56/ .223. Works like a charm. It's obviously much more expensive, relatively speaking, than your run-of-the-mill spring and buffer combo, but I really did notice an immediate difference once I installed mine and got to the range with it. Worth every penny in my opinion.
@U.SFreedomU.S
7 ай бұрын
Will you do a video on how to tune by cutting the main spring? Is the main spring the skinny or fat one?
@ericstaton440
7 ай бұрын
Do you make an adapter to work with the A5 system?
@magoid
5 ай бұрын
Ever since HK came up with the dual spring concept (HK USP?), I am surprised that it isn't more popular on PCCs and rifles. Looks like the patents expired long ago, so there is nothing stopping this to become more popular outside pistols.
@dad22153
6 ай бұрын
Great looking product. I'm building an AR in a 7.62X39 platform using a BCA complete upper assembly. Could you confirm what weight buffer would be correct for that setup? I am leaning towards the SRS configuration.
@armaspecusa
5 ай бұрын
I would try the H first and if it's still cycling to aggressive try the H2.
@manny17flash
7 ай бұрын
Compatible with rifle length AR15? if so which one.
@dennischi6107
6 ай бұрын
Which one feels the most like the JP SCS?
@navrhy3075
17 күн бұрын
Which one should I use if I have a suppressor?
@Khangbng
Ай бұрын
I'm planning to get the SRS, what weight should I get for a standard 16" barrel, midlength gas? Would it be H1? Will the SRS H1 still cycle with Steel Casing ammo? Thanks :)
@boakyeduan563
5 ай бұрын
My AR has a 16" barrel with a .750 mid-length gas tube, and I got the carbine weight SRS for it, but it was not able to return to battery very frequently when I release my bolt for reloading (this won't happen if I hand charge it). I kinda solved it by putting two quarters behind the SRS in the buffer tube to give it a higher force when releasing the spring. If I wanna change to a proper weight, which would you recommand?
@armaspecusa
5 ай бұрын
That is strange. I would make sure your BCG is locking back on the face of the bolt and not the BCG. That will tell us if it's fully cycling to the rear on last round hold open.
@boakyeduan563
5 ай бұрын
@@armaspecusa It does lock back fully to the face of the bolt carrier and so do I when manually locking it back, yet this problem still exists. I have to frequently use to the forward assist to push the bolt back to battery after releasing the bolt. (I use Sharps XPB carrier group and Strike Industries buffer tube if this can help you guys to determine the problem)
@geraldalsup560
7 ай бұрын
Yes they sell spacers 3 per package.
@krissmith5385
6 ай бұрын
I’m running the srs because I’m planning on running suppressed but works great unsuppressed in my 11.5. I also have a jp h2 in my 12.5 aero. Cant beat these for the price
@navrhy3075
17 күн бұрын
I have a Geissele H2 in my 14.5 right now, surpassed. You think I should get the SRS H2 over the SMB H2 for suppressed?
@krissmith5385
15 күн бұрын
@@navrhy3075 as long as your running an h2 you should be fine
@victorortega2718
7 ай бұрын
So if i want to do a direct replacement for a milspec ar which weight do I pick ?
@armaspecusa
7 ай бұрын
carbine
@user-ke4hw3cl5v
4 ай бұрын
Good day all, I was considering picking up a Gen3 carbine SMB. Can the SMB be used in any type of buffer tube or are all buffer tubes similar? Thanks for reading.
@armaspecusa
4 ай бұрын
The SMB can be used in Mil spec buffer tubes. if you are running an A5 or Rifle buffer tube you will need a spacer we sell on the web site.
@user-ke4hw3cl5v
4 ай бұрын
Thanks
@5fivezero0
4 ай бұрын
@armaspecusa I have a PSA Blem Ar-15 model. Which weight do I get for the SRS and SMB? Thank you!
@375Cheytac
4 ай бұрын
Barrel length? Caliber? Subs or supers? Suppressed? Gas length system? All of those are important to determine buffer weight.
@5fivezero0
4 ай бұрын
@@375Cheytac Barrel length: 16in, Caliber: 5.56, Not sure what you mean by subs or supers, Suppressed: no, Gas length: carbine-length. Thanks for the reply!
@armaspecusa
4 ай бұрын
SRS on carbine gas I would go with Carbine or H no heavier. with SMB you could do H or H2. SMB are easier to tune a rifle but offer less recoil reduction from our SRS. The SRS has duel springs so is best for suppressed guns and recoil reduction but is harder to tune your gun for it. Both great just depends on what you are looking for out of your build.
@5fivezero0
4 ай бұрын
@@armaspecusa Thank you for the details! Will def be picking this up for my build. Appreciate the quick responses.
@chevtow
4 ай бұрын
I’m looking at running SRS on 12.5” 5.56 and 9” 300blk both full time suppressed. Anyone have best guess on weights? Was leaning towards carbine since they say to drop down weight. TIA
@armaspecusa
4 ай бұрын
That should be good to go on 556. I would probably use the SMB on the 300blk with H weight.
@jameslee4328
2 ай бұрын
I run the H weight smb on a suppressed 12.5" 556 rosco barrel and it works great. Definitely smoother than a normal spring setup.
@jeffreyruple2668
3 ай бұрын
I have the arm253-bb can I just change the weight I needed the h3 not the bb or do I have to buy the other complete one?????
@armaspecusa
3 ай бұрын
The BB and AR-10 can not be changed. You need a new SRS in H3
@OhMyVideology
7 ай бұрын
Better customer service a phone number would make everything better
@mcinteer19
4 ай бұрын
And products that are available and made to actual specifications.
@OhMyVideology
4 ай бұрын
I cancelled order after endlessly waiting and would probably avoid the brand all together
@bigdzx6r
5 ай бұрын
Has anyone run SMS on 10.3 AR pistol with suppressor and what weight do you have on it?
@armaspecusa
5 ай бұрын
SRS I would run H. with SMB you could probably run H2 depending on the ammo.
@jakewells4098
5 ай бұрын
Should I use the buffer retainer pin or no? Looks like the retainer pin will eat up the rubber ring . But I really don’t even know how to take it out.
@armaspecusa
5 ай бұрын
you can use it with or without. But we recommend removing it.
@hansblitz7770
4 ай бұрын
It just sits in there with a spring underneath. Pull it out with needle nose pliers.
@jakewells4098
4 ай бұрын
@@hansblitz7770 thanks for the reply. But from what I’ve seen you have to take the buffer tube off in order to get it out.
@domingoluna2350
7 ай бұрын
I have an SBR 10.5 300 blackout I run a h2 buffer tube, would I switch to a ARMASPEC smb h2 ?
@armaspecusa
7 ай бұрын
correct. with the SMB run the weight you currently have. If you run the SRS system go down in weight.
@leonardoorellana7181
7 ай бұрын
I have a 300 blk 16inch barrel which one should I get ?
@FullMetalRuckus
29 күн бұрын
I currently have the SMB H2 in my .300 blackout and to be honest, the SMB series is no quieter than a high quality polished spring. I will say this - It pays to have a high quality buffer tube that has a thicker wall to eliminate some of the "twang" as well.
@whahahajr
4 ай бұрын
I have a Savage MSR 15 Recon. The buffer weight is 3oz. I run it suppressed and it’s super gassy. Ejecting at the 2 o’clock position. Well technically the 10 o’clock position. We’ll see who understands that. Now to the question. Not sure is I should go with the SMB 3.8 or 4.7? Or the SRS 3.8?
@armaspecusa
4 ай бұрын
to answer the riddle part. the clock it on the same axis/orientation as the ejection port. So if you go SMB go with the H or H2. The SRS because the dual springs I would do the carbine if you run it suppressed. The srs is less forgiving when it comes to tuning. the SMB is simple and thus easier to work with in most cases. but offers less recoil reduction
@whahahajr
4 ай бұрын
@@armaspecusa ok cool. And the answer was it’s left handed. So you are correct. Depends on the ejection port. But I knew if I said 10 o’clock everyone would question it.
@armaspecusa
4 ай бұрын
Ah Nice lol. I thought you were rotating the clock so 12 was 3 on a right hand gun. Let us know if you need anything else.
@Spaman42
7 ай бұрын
How backed up is shipping still? Order placed well over 2 weeks ago & no tracking numbers.
@christianmartinez2030
7 ай бұрын
Same but finally got it after like 3 weeks
@hispeed8500
7 ай бұрын
Same here. No shipping notification still...
@Spaman42
6 ай бұрын
3-5 days quickly turned into 3-5 weeks…
@MrLanzac
4 ай бұрын
Took 5-6weeks to get mine (this is like 10days ago )
@giddy6196
6 ай бұрын
What are some of the provable benefits to this system Over milspec?
@hansblitz7770
4 ай бұрын
Smoother recoil, more firm chambering in adverse conditions, less noise.
@LV_223
4 ай бұрын
The only thing completely provable would be the noise reduction. Everything else is subjective without creating some sort of fixture with force sensors to objectively measure felt recoil with and without it. I own the SMB GEN 3 in H2 and love it. The gun shoots flatter and follow up shots are much easier to me, especially with an upgraded trigger of your choosing. The best you can do is watch reviews and take other people's word for it. It's a nice upgrade, but I wouldn't call it an absolute must. It's more of a quality of experience kind of thing. If you like your current set up with a standard spring and buffer combo, then save the money. Nothing wrong with that.
@giddy6196
4 ай бұрын
there it is @@LV_223 Thanks :)
@dreamkiss4u
7 ай бұрын
Where's the link to buy them? Can anyone link me pls
@paratroopdawg
6 ай бұрын
just "google" armaspec
@numba1corner14
2 ай бұрын
Which one to run for a 9mm PCC?
@armaspecusa
2 ай бұрын
Our 9mm offerings
@stevenwagner9912
6 ай бұрын
I can't figure how the smb is supposed to work for a AR9.
@LV_223
4 ай бұрын
They have a specific model for the AR9. Just look at their website. You'll see it in the drop down when you select your buffer weight.
@stevenwagner9912
4 ай бұрын
@@LV_223 I think I have the 9mm one I'll get around back to it sometime. Went ahead and used a spring and heavy extended buffer. Thanks for the response.
@anthonyschwemm
7 ай бұрын
Which one will work with an ar9?
@stevenwagner9912
6 ай бұрын
I couldn't figure out how to make it work in 9mm. It has the pin in the center so the 9mm solid back bolt can't come rearward. I tried to remove the weight and had an opening for the pin but no pressure to hold the bolt closed. I think I just pissed away money and ended up with a lot of frustration. Best of luck if you try to use one.
@anthonyschwemm
6 ай бұрын
@@stevenwagner9912 I went with a 9mm 8oz buffer and a flat 308 spring.
@stevenwagner9912
6 ай бұрын
@@anthonyschwemm I have a regular spring and a heavier longer buffer. I forget the exact weight. It works great. The smb is in my toolbox of spare parts.
@mikehurley5374
2 ай бұрын
Mine sounds horrible in my gun way worse than the spring! I've tried everything to fix it so I'm going back to the spring! Sad
@armaspecusa
2 ай бұрын
Did you lube it liberally? It should sound super quiet. I have one in a MK18 and it is buttery smooth and quiet.
@MrLanzac
4 ай бұрын
Shit I just battled to get the h weight on my srs because that’s what I normally use now I see this and the c was good enough? Dang lol
@armaspecusa
4 ай бұрын
Yes we recommend springing down one. And the SRS is best with suppressed guns. But if the H runs fine stick with it.
@MrLanzac
4 ай бұрын
@@armaspecusa appreciate the feed back I switched back to the C weight . I’m gonna go from there. I’m using a BCM mk2 14.5 upper in my experience c or h work and with the info you’ve given I feel C for this is the smarter move at least starting out.
@yockhunter
4 ай бұрын
As of now your website doesn’t even work!
@armaspecusa
4 ай бұрын
what is wrong with it. what Issues are you having? Have you tried recently?
Пікірлер: 84