The transistor is probably for controlling the backlight. You can confirm this by checking if there is continuity between the BLK-pin and resistor R2's pad that is closest to the orange flex cable. Nice looking display. One will find it's way into my workbench at some point.
@mikeoliver3254
5 жыл бұрын
That is a pretty sweet little display, I think I’m going to have to order one of those as soon as I have a project for it. Great video Paul.
@mikeoliver3254
5 жыл бұрын
Blondie SL thanks for the informative response.
@gregandark8571
4 жыл бұрын
Oled dies after 1 year,tft last for 10 years.
@OndrejPopp
4 жыл бұрын
Tx for the video. Sorry to read about your heart condition. I am suffering myself from the Churg Strauss Syndrome. It may probably kill me one day too, at first I was quite aware of that, but now I don't think about it that much anymore... I am working on a design that needs a lot of RGB leds, and so in the end I ended up here with these displays. So I am going to use these instead. A lot cheaper, much more powerful and a way bigger resolution than to stick/glue together 2mm rgb leds...
@alanbacknd3120
5 жыл бұрын
Finally getting back to the roots, great to see an arduino projects
@Aerospacesmith
4 жыл бұрын
The Nano is the same microcontroller as the Uno (ATmega328p) so should run exactly the same on both. There is a really good library for the ESP32 modules: Bodmer tft_espi
@SurajGrewal
5 жыл бұрын
I've bought a lot from the 'buy display' guy. Faced no problems so far.
@certified-forklifter
5 жыл бұрын
great, thanks for sharing
@georgechambers3197
5 жыл бұрын
Now, that's a really nice little display. I'd rather pay a little more than wait a month for my orders too. You can buy almost anything from Amazon now. I'm glad to see you getting back to Arduino stuff also. 😁 Thanks for the video, my friend!
@michaelpadovani9566
5 жыл бұрын
That is a neat little display and when i get a project that demands good color like that I'll certainly consider!
@paulmichaelfreedman8334
3 жыл бұрын
I have 5 of these exact displays from aliexpress in a breadboard and hooked up to an RPI 4B. working on the driver because the ones I found always have something that will not work due to sudden lack of an external module etc. So I've grabbed the one with the most GFX commands and I am now modifying it to work solely with RPi.GPIO and spidev modules. I want to make a mini random runner fruit machine with these displays in portrait mode.
@MCsCreations
5 жыл бұрын
Really nice looking display, dude! 😃 Great job!!!
@originalwolfrider
5 ай бұрын
i have the display but mine has 4 buttons on the bottom side of board , how do i set the buttons up ? i also have 1.8" rgb display that i need to setup still. but that ones for later lol i am just asking about the buttons ty in advance for any help
@nekonihonjin
4 жыл бұрын
I was trying the graphictest_tft code but couldn't get it working, check the code, check the wiring, everything ok but the display wasn't working, just 2 sec of video then off... saw the first part of your video, switch to 5v instead of 3.3v e violá! working as a charm. thanks!
@gasko2762
4 жыл бұрын
I'm dealing with a display like this, I'm glad I found your video, it helped me a lot. well thank you
@Scrogan
3 жыл бұрын
Remember that a nano’s 3.3V pin comes from the internal voltage reference of the CH340G, it isn’t designed to drive a load. Same for a CH340-based Uno, not sure about the ATmega16U4-based Unos though, or any board using a different USB-to-serial IC. I’d recommend trying a dedicated 3.3V regulator with low enough dropout instead.
@oliveringgs841
Жыл бұрын
Where is the test program code you ran? I cannot find it.
@bblod4896
5 жыл бұрын
Nice. Going to need a magnifying lens. Thanks Paul.
@NicolasP1973
5 жыл бұрын
Thanks for an other great Video. I have a small remark about your sound: it is great when your un the lab, but when you are behind the computer it is over-modulated (distortion) and louder. It would improve your overall video quality if you cloud sort it out. Continue your great work, I'll appriciate it and looking forward for the nex one.
@hannafebriani4277
2 жыл бұрын
Hello, Can the LCD be used for display camera, like a thermal camera??
@orkunasci9836
3 жыл бұрын
hi, is there any way to use it with microchip MCU's? are there any libraries for XC8 compiler ? thanks.
@flemmingchristiansen2462
5 жыл бұрын
great find, nice display you might want to adjust the level on the mic at the PC
@MalagasOnFire
5 жыл бұрын
nice tiny LCD IPS display and library usage looks , easy to implement. is there any library for RPI?
@learnelectronics
5 жыл бұрын
Yes. Its linked on the buydisplay.com page.
@filigenzilab9613
2 жыл бұрын
How do I upload custom images?
@batticha462
5 жыл бұрын
On Aliexpress even cheaper, just US $2.07 and the 1.18 inch for US $2.44
@nicksanto882
5 жыл бұрын
Good stuff again!!! Thanks!
@meldrickfernandes965
3 жыл бұрын
Can we play videos on that
@AnxBeta
3 жыл бұрын
Can this run a .Gif?
@SurajGrewal
5 жыл бұрын
And I though I got those glitches due to buffer overflow.
@melplishka5978
3 жыл бұрын
What’s it used for lol
@certified-forklifter
5 жыл бұрын
nice, now i also want one =D
@kevinroach9380
5 жыл бұрын
Good info and nice display. How about keeping you mic volume the same throughout the video.
@learnelectronics
5 жыл бұрын
Two different systems
@pulesjet
5 жыл бұрын
I was having some issues hearing the first part. Went so far as to check on my Windows setting. They hit me with a 2 hour update just yesterday and it reset a pile of my preferences. FLIPPING WINDOWS !
@vatossan
5 жыл бұрын
wow she had a black soul? damn, thats scary
@weerobot
5 жыл бұрын
Ok added to shopping cart... lol
@RinkyDinkElectronics
5 жыл бұрын
Please note that this video is promoting the use of an illegal library! The version of UTFT distributed by BuyDisplay is in violation of the NC clause of the library license.
@learnelectronics
5 жыл бұрын
Please note I am not PROMOTING anything. I'm showing folks how to get hardware working. So instead of being an asshole on my channel, why dont you contact me and explain your position. Since you are too lazy or not bright enough to find my email on my channel (which you just slandered) here it is arduino0169@gmail.com. Do I seem angry? Good, because I am.
@peek2much3
2 жыл бұрын
Don’t you hate when some guy talks like he’s all that and with a this arrogant god like complex.
Пікірлер: 42