My AI Facebook Group: facebook.com/groups/theairevolution My Instagram: instagram.com/oliviotutorials/
@Alex-nk8bw
Жыл бұрын
Nice one! I've been throughly disappointed by SD's outpainting so far, but gave it another shot with your method, and it actually works really well! 👍
@Drone2222
Жыл бұрын
Great technique! Outpainting is usually a disaster for me as well. The only thing I caught that you should be wary of is the resolution, the original image was 1024x1024, and since you inpainted at 704x704 you lost out on some detail! Thanks again, I'll be using this method for sure.
@OlivioSarikas
Жыл бұрын
That's a good point. You can set it to a higher resolution, but the rendering will also take longer
@ChrisMattar
Жыл бұрын
Great Job as always Olivio
@OlivioSarikas
Жыл бұрын
Thank you :)
@ARKADIY_GABOV
Жыл бұрын
amazing and non-obvious way to fill in the missing areas, thank you very much!
@randymonteith1660
Жыл бұрын
I used your trick on a MJ image and it worked like a charm! Thanks!!
@superbaiart1956
Жыл бұрын
Never used inpainting this way, very useful information, thanks!
@blizzy78
Жыл бұрын
Thanks for the advice, using inpainting instead of trying to make outpainting work helped a lot!
@BobDoyleMedia
Жыл бұрын
So helpful! Using this technique with the Painthua app with great results! Thanks!
@sodakhanart
Жыл бұрын
Oh i’m super excited to try this out! haven’t had the best luck with out painting in the past but with trying to make a comic it’s definitely essential to figure out!
@OlivioSarikas
Жыл бұрын
Give it a shot. It works with all kinds of images. not just comic style
@Theexplorographer
Жыл бұрын
Wait, what? HuaPaint works great for outpainting. I have even outpainted MJ images with SD with it. Been using it for a month now with perfect results.
@OlivioSarikas
Жыл бұрын
You mean PaintHua - yes, i need to make a video about this too. But with this method you have actual control over what will be in the parts you create :)
@Theexplorographer
Жыл бұрын
@@OlivioSarikas Yes, it has the same painting features... much more powerful.
@OlivioSarikas
Жыл бұрын
@@Theexplorographer I see what you mean. Good point
@Theexplorographer
Жыл бұрын
@@OlivioSarikas I look forward to your video!
@Vikram-wx4hg
Жыл бұрын
Cool stuff!
@chadcrypto2675
Жыл бұрын
Good video, is there a chance when you use automatic1111 , you use darkmode? its real hard to see with the bright light it sends out. Just a suggestion.
@1Garrett2010
Жыл бұрын
Really very very useful tip, thanks!!👀👍
@pumayana248
Жыл бұрын
Very smart! Awesome results thanks 🙏
@OlivioSarikas
Жыл бұрын
My pleasure!
@floc.9033
Жыл бұрын
That is amazing, thanks a lot for this trick !
@bra5081
Жыл бұрын
Why not pick center spot in resize canvas instead of centering layer afterward ?
@mattc3510
Жыл бұрын
Awesome video, thank you
@texx8205
Жыл бұрын
Great results! Now this is something Automatic1111 could improve on so that the additional step of resizing and image editing in photo editor is no longer needed. If they ever implement something akin to Nvidia Canvas, that would be huge gamebreaker for Stable Difffusion.
@alenz01
Жыл бұрын
Hi! Thanks for your wonderfull tutorila. (btw I think it would be better if intead of suggesting quantities, you actually explained what each slider is for,).
@antarus6338
Жыл бұрын
Nice video
@spooky4655
Жыл бұрын
Since the UI has changed a lot, maybe a new video for this on the new UI?
@demischi3018
Жыл бұрын
How did you manage to get a perfect Hand out of Midjourney?
@DJVARAO
Жыл бұрын
Great trick!
@OlivioSarikas
Жыл бұрын
Thank you!
@JUUSOPILOTTI
Жыл бұрын
been doing this with after effects😄what ever works for you, as you said :)!
@AlexanderGarzon
Жыл бұрын
Smart move !
@desu38
Жыл бұрын
"You could not live with your own failure... and where did that bring you? Back to me." - Drawing
@kingowlwriter5367
Жыл бұрын
Cool ! can I ask you for your GPU , what GPU did you use for run SD smoothly like this,
@ilusions4
Жыл бұрын
6:54 Facebook..? Who is this video for?
@GreggOliverBass
Жыл бұрын
At 3:00, you say "next, we go to the browser where we have installed 'automatic 11 11' ". what is automatic 11 11?
@HanSolocambo
Жыл бұрын
Seriously ? What are you even doing in here dood (´∀` )
@GreggOliverBass
Жыл бұрын
@@HanSolocambo learning. You?
@CuddlyPsycho1134
Жыл бұрын
How much VRAM did this take?
@Ashudo
Жыл бұрын
Great video. For the people that have an old machine and where SD can't be installed, is there a web solution? Thanks in advance
@HanSolocambo
Жыл бұрын
don't give your money to crooks websites who make you pay to use something that's free. Save money. Buy a decent Computer.
@nattyzaddy6555
Жыл бұрын
Can't you just do it all with inpaint sketch, which allows you do draw with different colors
@LouisGedo
Жыл бұрын
👋 It's about time we're getting an Outpainting that has some promise
@OlivioSarikas
Жыл бұрын
totally. the classic method is just too random
@blackvx
Жыл бұрын
Ingenious! Thanks Olivio!
@OlivioSarikas
Жыл бұрын
Thank you :)
@blackvx
Жыл бұрын
@@OlivioSarikas I had to roll back to one of your previous tutorials as I didn't install the sd-v1-5-inpainting.ckpt yet. Also, I just notice... nice...good job on the astronaut's hands! 😅
@PaulMiil
Жыл бұрын
FYI apocalyptic is pronounced "a PAW kah lip tick", though I may start calling it Apo-Calyptic lol
@YouCountSheep
Жыл бұрын
I tried it and it was very bad. You have to change the prompt a great deal from your original, maybe even preview the seed and the new prompt to use for inpaint. You also do not show the render, which means you tried alot. The masked area is way too big. There is no way you got this level of detail with 704x704 in one pass. What you actually have to do is loop the output back into the input several times for many many more masked areas to get a detailed result. This method here might work for comic and limited color palette. It certainly did not work on the more realistic images I tested this on. If you don't adjust the art style, even when using the same seed, the weights will change and the artstyle might look very different from what your original picture looks like. IT WILL NOT replace the prepainted color blobs, instead it will mix the new render with it which looks utterly terrible in anything but comic style pictures. So do a test render of your seed, adjust the style and loop at least 3 times to get a result, but then still it will need alot of work because it will be pretty pixelated, might even have to adjust the mask blur. Either it is a bug or I am doing something wrong, because even with denoise set to 1 it will not erase/replace the prepainted blobs although it uses the colors, but the new render looks like it only was overpainted with way less denoise
@D_VAULTZ
Жыл бұрын
its got the perspective wrong.
@samaBR333
Жыл бұрын
facebook no.... please, reddit!
@growupempresas3698
Жыл бұрын
I´ve this model v1-5pruned.ckpt [a9263745] this inpant is already inside it? plz
@OlivioSarikas
Жыл бұрын
you can do inpaint with it too. but there is a separate model for inpaint that will give better results
@growupempresas3698
Жыл бұрын
@@OlivioSarikas i tried with this one and nothing happend, so I downloaded the model and put in the models folder, let´s try it! thank you man! nice channel!
@talontoth4402
Жыл бұрын
I'm giving you a like just for using affinity and not adobe. lol
@mibo747
Жыл бұрын
MANY THANKS UNBELIEVABLE TECH...
@OlivioSarikas
Жыл бұрын
You're welcome!
@SW-fh7he
Жыл бұрын
Random Florentin Will appeared
@OlivioSarikas
Жыл бұрын
😂
@genin69
Жыл бұрын
2nd tutorial im watching today where the controls have obviously changed from that version of auto1111. the inpaint at full resolution does not exist anymore and inpaint seems to have changed. maybe an updated video as this one does not have relevant info anymore?
@MysteryFinery
Жыл бұрын
i also thought of this workflow, we think alike.
@OlivioSarikas
Жыл бұрын
awesome. and i am really happy how well this works
@Dimittri
Жыл бұрын
Where can I find this SD1.5 inpainting file for download?
@Xandr_Nekomata
Жыл бұрын
I dont know why but area where Im trying to add something has a little bit chabged color. Therefore I can see initial rectangle in center and outpainted area with a little bit different color ((
@Riker20
Жыл бұрын
hey, nice work.... can you give me the link to the inpaint model ?
@matTmin45fr
Жыл бұрын
It's actually better that just Outpainting because you have control of the composing. Great idea !
@ECCLESIAOFBURNINGONESS
Жыл бұрын
What is outpainting?
@masterofankh_art
Жыл бұрын
You saved my day! THANKS!
@CuddaBrown
Жыл бұрын
Very cool trick....
@Blue-eu5qn
11 ай бұрын
My Eyes 😵
@stonemass3569
Жыл бұрын
brilliant
@Dorff_Meister
Жыл бұрын
Interesting. I'm sure I'll be back to watch again when I need to do this. I very naively tried outpainting earlier today with laughable results. I'm anxious to try again (but Dreambooth training is keeping my GPU busy this evening).
@TheKdcool
Жыл бұрын
PaintHua let's you have much more control over the generation!
@OlivioSarikas
Жыл бұрын
that's also great. I will make a video about that soon too :)
@woszkar
Жыл бұрын
Very useful trick! Thanks for sharing!
@MikkoRantalainen
Жыл бұрын
Great tutorial. If you GPU doesn't have enough RAM, you can get better quality if you paint top of left left side separate from bottom of the left side. The AI network will always render a square patch internally and if your to-be-filled area has roughly 1:2 aspect ratio, half the AI work will be lost / resolution will be half it could be.
@3oxisprimus848
Жыл бұрын
Beautiful video as usual Olivio! What happened to my blue friend at the end of your videos? Please bring him back!
@moonpost
Жыл бұрын
ah, awesome trick that makes so many things possible! thanks
@natsuschiffer8316
Жыл бұрын
hey man! Great video, noticed you have switched from photoshop to affinity, Any reason why that is?
@TheUselessgeneration
Жыл бұрын
It looks like the outpainted sections are lighter and less detailed. Is that just the contrast?
@Pos44Dami
Жыл бұрын
c'est magnifique !! bravo
@karamellkamels
Жыл бұрын
Is the picture at the end 2048x1024? If yes, it is posible to do even more resolution like in dalle2?
@OlivioSarikas
Жыл бұрын
yes, but you can always upscale :)
@MarkWilder68
Жыл бұрын
Olivio!!!!! I love you dude... Thank you for this.
@OlivioSarikas
Жыл бұрын
Thank you :)
@FilmFactry
Жыл бұрын
Best AI Content!!! Thanks.
@OlivioSarikas
Жыл бұрын
Thank you, so nice to hear that :)
@RubenSalcedo
Жыл бұрын
Where exactly you did that? Thank you!! great job!
@OlivioSarikas
Жыл бұрын
The software is called "Affinity Photo" but you can also do the same in the free "Krita" Software. And the Stable Diffusion is a local install called "Automatic 1111"
@RubenSalcedo
Жыл бұрын
@@OlivioSarikas I have Photoshop, I was asking for the later, I'll search for it, it links to your account on Stable Diffucion for charging credits? Thank you!
@blender_wiki
Жыл бұрын
Basic stuff... Is surprising that people need a video to try out this workflow and they didn't figured out alone. More tips: Export the inpaint/outpaint mask from your drawings software (no need to get mad with web UI mask tool) and add noise layer on the part that you need to repaint with a mask to get much more detailed controls on the outpaint. We call in our studio this technique : "paint with noise". Don't let SD mange the noise when you can doit ;-)
@OlivioSarikas
Жыл бұрын
could you send me a email? i would love to talk more about "paint with noise" technique and also love to hear about your studio
@ShiroCh_ID
Жыл бұрын
wait wait huh!? you meant you select "upload mask" and use the mask we made from Art Editor Software(PS,AP,GIMP)?
Пікірлер: 96