Dang I didn’t even know people upgraded these triggers. Every example I’ve picked up had an amazing stock trigger.
@name_less7687
2 жыл бұрын
That triggers an upgrade for appearance only and voids the warrenty to install one .. taking the grips off is a no no If you're going to do it, install a red dirt trigger. Use their size chart.
@jeffwilliams3436
2 жыл бұрын
@@name_less7687 yeah I honestly don’t even see a reason to upgrade the trigger. It’s probably the best stock trigger I’ve ever felt.
@name_less7687
2 жыл бұрын
@@jeffwilliams3436 Maybe it varies gun to gun, since they are all fit by a person. I was pretty dissatisfied with mine in my model p being that it was a $2,300 gun. So I put a red dirt in it. There was probably about an 1/4 inch of travel on mine and almost all of it was pretravel. Now there's about 1/32.. I didn't change the weight. I don't know what the weight is but it feels good to me. I also love flat triggers. I'm sort of surprised that staccato doesn't use better triggers.. A lot of 1911's and revolvers have a hair trigger out of the box. A metal trigger is nice to have too, the polymer thing really surprised me. Was this your first 1911 style gun? I mean a Springfield milspec has a better trigger than my staccato did out of the box. Compared to a glock or well.. any striker gun .. of course it was way better than them.
@jeffwilliams3436
2 жыл бұрын
@@name_less7687 I don’t own a P…but I shot a Springfield Garrison 9mm back to back with it and was shocked at how good the trigger in the P was. Minimal take up and short reset. That being said Springfield 1911s are fantastic out of the box. Though I didn’t care for their Emissary model.
@shanelongo2921
6 ай бұрын
Why on every other video mainly grip swapping they take apart the whole gun IE hammer, saftey, ETC but not you? I would assume if im just swapping frames I could do exactly what you did and leave he hammer and safety installed right??
@TBunInd
6 ай бұрын
If i dont have to do it im not going to. but i guess everyone has their own way of doing it. I have been doing 1911s for 12 years and 2011s for the last 3. same same.
@Cory14Tina02
11 ай бұрын
I assume this procedure would be similar, if not the same for pretty much all 2011s / 1911DSs..?
@TBunInd
6 ай бұрын
pretty close
@pathfinder509
Жыл бұрын
Does this remove some of the trigger travel?
@Right2Bexar
Жыл бұрын
Is this THE Tebun? 🥵🥵
@sharris7034
Жыл бұрын
What’s the pull weight on the trigger? Same or 2 pounds like the some of the Atlas guns?!
@TBunInd
6 ай бұрын
no youll have to get the ignition kit to mess with the weight. trigger shoe is just preference
@Texas_ballistics
2 жыл бұрын
Hey man I wanted to ask a question. I had this trigger installed by somebody but I’ve been having problems with it. The trigger gets hard at the bottom but crisp when I pull it from the top. And at times gets stuck and doesn’t pull no matter how hard. What could be the problem ? Or is that how the trigger is supposed to be ? Btw nice video ! I’m taking it apart myself with your video💯
@TBunInd
2 жыл бұрын
Check your sear spring placement
@christianbattung2548
Жыл бұрын
Can the mag release be removed by itself? Or all the prior steps in this video must be done first?
@TBunInd
6 ай бұрын
you can remove it by itself
@gunlover5147
Жыл бұрын
And what about how tocput it back togethe?
@TBunInd
6 ай бұрын
do the steps. buck backwards
@MD-xb1qw
4 ай бұрын
I appreciate you. Very helpful tutorial. 🫡
@TBunInd
3 ай бұрын
Glad it was helpful!
@BradThomas-dm9bl
Жыл бұрын
Is this the short, medium, or long atlas trigger?
@TBunInd
6 ай бұрын
med.
@name_less7687
2 жыл бұрын
Red dirt trigger, not this.
@TBunInd
2 жыл бұрын
Agreed. it was a customer's. I told him hes a island boi
@PracticalPostMan_FLA
2 жыл бұрын
How much do these triggers bring down the trigger wait. My staccato p trigger is just way too heavy.
@TBunInd
2 жыл бұрын
It doesn't, to bring down pull weight you'll have to mess with the sear spring, mainspring and sometimes the sear itself.
@PracticalPostMan_FLA
2 жыл бұрын
@@TBunInd so what exactly do these triggers do besides shortening the pre travel and reset ?
@CHEREMU5HKA
2 жыл бұрын
Aesthetics and for those who dont want a polymer trigger shoe
@rolandoalers450
2 жыл бұрын
Very new to the platform, but is that an extended slide release? If so can you please share the name, thank you
@TBunInd
2 жыл бұрын
Triarc. Get it before its gone
@MBoohoo
2 жыл бұрын
@@TBunInd Triarc website states that it requires fitting. Was it difficult? I've only dealt with polymer guns and drop in parts. I just got C2 and my short fat thumb can't reach that factory release.
@TBunInd
2 жыл бұрын
@@MBoohoo lucky mine dropped in
@GunsandButterTV
2 жыл бұрын
@@TBunInd was it the $69 option ?
@True_Patriotx
Жыл бұрын
What slide stop is that?
@Gunsncarsnstuff
Жыл бұрын
I was curious about the same thing. Ever find it?
@TBunInd
6 ай бұрын
triarc
@2A_mike
2 жыл бұрын
Does this trigger just drop right in or did you have to cut the grip to get it to fit? I want to install this on my XC
@TBunInd
2 жыл бұрын
Dropped right in for my xc, but you never know. Ive done 3 so far and all dropped in
Пікірлер: 40