I bought a milling machine yesterday and that's mostly because of how much I was inspired by your work. Thanks for teaching us the art.
@toysareforboys1
5 жыл бұрын
I need a milling machine :( What voltage/phase is yours?
@gresvig2507
5 жыл бұрын
My lathe and mill are ild school three phase 220-- that scares a lot of people off, but a $90 variable frequency drive off of amazon gives me infinite speed adaptability and all the power. : ). The old timers will say you need a pricey as heck rotary phase converter, but those days are past.
@toysareforboys1
5 жыл бұрын
@@gresvig2507 Damn, nice! Does it convert two phase 220 to three phase 220 or is that not possible or would I need something different?
@gresvig2507
5 жыл бұрын
I already had an outlet for my welder 220 two phase (heck, an oven outlet is plenty) and I'm cheap, so I just slapped a plug and a twist lock outlet on one VFD and plug in either the lathe or mill. It converts the 2 phase to 3 pretty efficiently, and you have infinite speed control (though you'll need some kind of tach to do accurate tool cutting speed calculation). It seems kinda unhappy at really slow speed like when I'm threading, but it's usually not an issue since my machines are from the 40's and I can gear super low. Most old-fashioned phase converters are pretty inefficient and you usually can't go very high power without tripping a breaker, but I've had zero issues with my 50 amp. The VFD I got is rated for 4hp, but I only have 3hp motors so it seems to have no problem. I'm only a hobbiest, though, so I don't run it for hours on end-- though I hog out some metal sometimes and it doesn't complain : )
@toysareforboys1
5 жыл бұрын
@@gresvig2507 Oh damn, wish I would have met ya a few months ago! Killer deal on a milling machine (basically free to a good home but you provide transportation) but it was three phase and when I called my electrical company to install three phase at my house they laughed at me. Got a link for the VFD you're using? :D
@Jacob-64
5 жыл бұрын
Manual maching makes you use your brain, rather than punching in a code or using a memory stick . Long live manual machinists like Adam 😊
@Sicktrickintuner
5 жыл бұрын
Sean logie Yep it makes you think much more of how to get it done and get the work holding done
@MakeItWithCalvin
5 жыл бұрын
As a CNC machinist, the cynic in me says "err cnc is best and fastest" but the machinist in me loved seeing you using old school methods. Keep up the good work dude!
@SuperAWaC
5 жыл бұрын
does that include the time it takes to make and optimize the cad? does it become worth it for a one-off job?
@MakeItWithCalvin
5 жыл бұрын
@@SuperAWaC depends on if the CAD was done ahead of time or not. That said it depends... The upside to CNC is you could do them all in one go and be done.
@GrayRaceCat
5 жыл бұрын
@@MakeItWithCalvin "does that include the time it takes to make and optimize the cad?" So the short answer is No?
@frankinjeep1194
5 жыл бұрын
CNC is fine and all but a lot of things cannot be done or repaired with CNC
@eliduttman315
5 жыл бұрын
@@frankinjeep1194 I keep ranting, augment, augment, augment. Add new technologies to those already proven. Replacing is (IMO/IME) very foolhardy. Pick the "weapon" that's well suited to the particular task at hand. One size NEVER fits all.
@ionstorm66
5 жыл бұрын
Can't wait to see how you manage that plasma cut stainless, it's is the best material I've found for turning carbide endmills into art.
@xenonram
5 жыл бұрын
Maybe if it's cheese grade carbide.
@ionstorm66
5 жыл бұрын
@@xenonram Plasma cutting stainless steel causes chromium carbide to form. Chromium carbide is a rockwell hardness of 74, while carbide is only 80. That combined with the stainless work hardening, makes it eat carbide.
@85932
5 жыл бұрын
@@ionstorm66 Lets say rockwell hardness 74 means very brittle material???
@Sicktrickintuner
5 жыл бұрын
Ive had to manually grind a starting spot on stainless with a burr. If not it eats everything
@ionstorm66
5 жыл бұрын
@@85932 Just like carbide tooling.
@CrimFerret
5 жыл бұрын
I love it, you basically turned the mill into a rotary metal scraper. I also appreciate the desire to make the surfaces look good even if it doesn't matter for the use of the part or even if anyone else who'd care will ever see it. Doing it the best you can do it matters to you. That's the difference between a craftsperson and a hack.
@boozler8194
2 жыл бұрын
Anything you do in life should be done to the best of your ability. If not, then it really isn't worth doing.
@CrimFerret
2 жыл бұрын
@@boozler8194 It's called being a craftsperson.
@raincoast2396
5 жыл бұрын
A man fully in his element and enjoying every minute if it! Thank you Adam. Cheers.
@dayofmone
5 жыл бұрын
Worked in a stock that handled machined parts for a little while and really started to appreciate how you make sure there are no sharp edges on your workpieces.
@AlphaNerd132
5 жыл бұрын
You remind me so much of my father that passed away. He would make tolerances on things perfect even when it made no difference to the actual function of the part. He took pride in any job that he did.
@jonpardue
5 жыл бұрын
Fantastic to see the depth stop and setup for repeating radius cuts. Learning to make short runs at home on manual machines is a signifigant blessing. Thank you for this kind of content!
@junglejonny1000
5 жыл бұрын
I was a design and fab tech and worked with stainless. Stainless is hella hard and burns up tooling quick. As someone that knows how difficult this project really was, you made it look almost effortless and you have my respect brother.
@Abom79
5 жыл бұрын
Thanks. It can be tough but with the right speeds plus coolant, not too bad.
@badvlad9861
5 жыл бұрын
Excellent video, luv the way you think outside the box to get things done. Your problem solving is artful.
@davids2928
5 жыл бұрын
Maybe someone mentioned this, but when gang milling multiple parts like you mention at 5:20, you should add a ductile wire or piece of cardboard between the vise and parts so that it clamps on all of them evenly. That is what I do.
@theboiwhohasnoname
5 жыл бұрын
Yeh piece of paper or g clamp the parts togethor works fine :)
@Trident_Euclid
5 жыл бұрын
Manual machining teaches you how to be resourceful and creative with the machines and tools. And you clearly excels at it.
@ron827
5 жыл бұрын
I suspect the customer will have a very large bill to cover the SS material and labor but is lucky to find a machinist like Adam willing to do a job like that. Go Adam!
@christopherharrington7337
5 жыл бұрын
That K&T is a beast, rock solid at removing metal. Enjoyed the video, thank you.
@onemaninaboat
5 жыл бұрын
Ingenious! For a moment I was thinking that you should really go CNC, but for small batches like this and one off odd jobs it would be completely uneconomical and most likely would take longer considering the time required for programming.
@kyledombrowski7051
5 жыл бұрын
I can design that part and make toolpaths faster than you can set up and tram that rotary table.
@heavymachining7830
5 жыл бұрын
Remember that cincinnati milling machine you showed in Neosho Mo. Last summer Adam? It's in our shop now. The rigidity of a big mill can't be beat, just used the cincinnati to do some heavy milling Friday, rebuilding an American pacemaker tailstock I picked up during the same trip. Videos coming soon!
@Benny_of_DK
5 жыл бұрын
This is how we did things when I was in the classroom as a machine worker , It was around 1971 - 1974 It reminds a lot of old memories, absolutely beautiful work.
@martineastburn3679
4 жыл бұрын
What I did on my saw and it worked perfectly for over 10 years (canister rusted finally but filter was perfect.) I used a Hydroloic filter head and filter in line with my fluid on my saw. It filters out the metal flakes that beat on metal but also trashes the blade. I simply cut the hose and inserted the filter head.
@jimmya4217
5 жыл бұрын
When machining multiple pieces in the vice, use a piece of copper round stock. This will hold all of your work and compensate for slight size inconsistency.
@bobsofia68
5 жыл бұрын
3 different guys might have made those hold downs 3 different ways. Always interesting to see ya think your way thru jobs like this.
@catabaticanabatic3800
5 жыл бұрын
" More than one way to skin a cat" is how you should think as a machinist. It all comes with years of experience. I used to make similar parts to those that were used in the manufacture of tyre retreading equipment. we had a simple fixture that we screwed them onto then turned all of the radii on a lathe. Just a plate with a boss and a series of threaded holes on a PCD. Easy peasy,lemon squeezy. Nice work Adam.
@Kvasir87
5 жыл бұрын
When I need to clean up several parts like that I usually use a bit of aluminium filler rod on one side of the material. That helps clamping it. Never had any issue ... Good work Adam. I used to work a lot on stainless. I hope you won’t get frustrated by the edges of the plasma cut staino
@demonknight7965
5 жыл бұрын
i like how you don't look at it as a job. you look at it how can i play with my machines and get this done? just a big kid and his toys lol.
@DavoShed
5 жыл бұрын
I get what you are saying but I don’t think a “big kid” is quite fair. Kids can’t teach like that. Adam shares his skill, if we have the tools or something similar we can take at least a part of Adams skill with us. I think Adam is self employed now but I think the line “Don’t tell the boss I’d do this for fun anyway” fits pretty well. :)
@jimh.5286
5 жыл бұрын
We're all kids, it's just that as we get older our toys become more sophisticated.
@kimber1958
4 жыл бұрын
Adam. The pride you take in even the simplest part says a lot about you . it is very satisfying to see. It’s a good life lesson. Love you brother keep giving us the content for as long as you can do it with a smile and gratitude for the art.
@carlwhite8225
5 жыл бұрын
Those big circular cutters always sound angry but give a nice finish, Learned some things and was not even trying, Thanks Adam.
@toddpf
5 жыл бұрын
Awesome stuff as always. The video makes it look like the 7 inch saw is running the wrong way. Trippy!
@echothehusky
5 жыл бұрын
I like the way you explain each operation as you go, very informative. Looking forward to part 2!
@nathaniellangston5130
3 жыл бұрын
Its funny how the camera frame rate makes the cutter spin in the opposite direction of the arbor haha. Love the video!
@AlanWoodardwoodisgood
5 жыл бұрын
I love how ABom talks to you like your in the shop working with him, "hey this is the process I'm going to use......" Awesome stuff.
@theboiwhohasnoname
5 жыл бұрын
5:28 to stop multiple parts moving when clamped togethor like that I either use a piece of paper on the back jaw. Or use a g clamp to hold them all togethor.
@MaturePatriot
5 жыл бұрын
If you enjoy what you do, you never work a day in your life. Innovative machining methods. Great work.
@isbcornbinder
5 жыл бұрын
Who is that skinny guy in the video? The head on it look like Adam, but the bottom looks like someone else. I am fighting my down to 300#. I started at 535#. You are an inspiration.
@mehmettemel8725
5 жыл бұрын
As you said Adam that clamp piece was possibly machined on a lathe into a ring with step bore on one side and chamfered on the other and cut into segments.Then rounded and drilled I believe.
@bobbyvance6622
5 жыл бұрын
In milling short blocks, I would recommend to put another one on the other side to equalize the vise pressure. It will make your vise last longer.
@Guds777
5 жыл бұрын
If Adam were a mythical being from Ásgard, wielding a enchanted magic hammer that he and he alone could wield, then its name would be Edgebreaker...
@MrShanghai34
5 жыл бұрын
ive been watching a lot of ASMR videos lately.... machining falls under this too. Its nice to sit back and watch things being made..
@esoomreltna
5 жыл бұрын
Adam, So glad that large radius cutter worked OK. It is vert gratifying to see it used by a skilled pro such as yourself. All the best, Eric Hoffmeyer
@dougankrum3328
5 жыл бұрын
….6:50.....razor sharp edges, Thank You...for anyone doing any sort of work with Stainless Steel....every thing you cut leaves that sharp edge...very sharp...!
@Dwarfracer88
5 жыл бұрын
As a hobby guy ( I'm not even gonna call myself a machinist ) with a South Bend 9" lathe and a round post mill/drill, listening to Adam give his feeds, speeds, and depth of cut all "I" hear is "With this carbide insert tool in my 24" fly cutter we are gonna be running the mill at 9600 rpm taking a 3" depth of cut at 980 feet per second". Man I wish I could afford some real machines.
@starlyabadillo6529
5 жыл бұрын
Can't beat the K&T for the heavy weight on the work.
@dougbourdo2589
5 жыл бұрын
It is So Adam to continue to go to the Nth extreme to get an Aerospace quality finish on some exhaust system 'Hold down' clamps. Got to admire that. Well Done Adam.
@johnboyd7158
4 жыл бұрын
Really enjoying the slow motion milling machine. Thanks Adam.
@nicktohzyu
5 жыл бұрын
I suggest you reduce the shutter speed (aka shutter angle) on the video cam so moving things (like the cutter and flying chips) look more crisp
@mehmettemel8725
5 жыл бұрын
That's possibly why the side and face cutter looked like it was spinning in reverse and forward depending on eye concentration.
@nicktohzyu
5 жыл бұрын
@@mehmettemel8725 no, that's framerate, nothing to do with shutter speed. Though, if shutter angle is 100%, it will just look like a blur
@armin0815
5 жыл бұрын
And there I was, thinking that stainless was somehow special and very hard to machine. Then seeing how you‘re shaping it like someone cutting pvc to size. I guess it helps when you know what you’re doing and have the right tools. :)
@ilaril
3 жыл бұрын
I know this is an old video and all, but I just wanted to let you know that I really do appreciate the work you do and the how you show it all on the videos. As I only have one hand that kinda works as it should, I wish I had access to a shop like yours where I could at least every once in a while be at peace and try to use my brain to figure how to make the ideas I have, a reality. Really nice videos, and so relaxing! Thank you! All the best to you and Abby, from the cold northern Finland called lappland.
@mazdaman1286
5 жыл бұрын
I hope you can get apprentices because here in the UK most of the shops I have visited rarely have young guys in them. Mostly "older" fellows working , one has a couple of real old timers in it 75 to 80's who come in once or twice a week and are fascinating to watch their skills.
@CursedLemon
5 жыл бұрын
That seven inch cutter is absolutely terrifying.
@Breennan
5 жыл бұрын
"I'm gunna put this in the vise in my new Booth Machine Shop Rotary Shaper..."
@Patriot1776
5 жыл бұрын
Nice way to put it!! ^^
@scottmarshall6766
5 жыл бұрын
My thoughts would be toward putting the clamps on a 7.5" radius plate and turning them on the lathe, but we both know the old ones were just relieved with a belt sander. No shame in doing it with precision - Gotta respect striving for perfection.
@Smallathe
5 жыл бұрын
Brilliant thinking in 3D. Wonderful work!!! Thanks for the tips!
@dingus153
5 жыл бұрын
That's one heck of an exhaust system
@daveritchie7025
3 жыл бұрын
Adam, having managed welding and machine shops at a couple of major airline jet engine shops, I can attest that you are a true craftsman! I'm not a machinist myself but I do have a basic understanding of machining and welding processes. One thought that I would offer when "reverse engineering" parts or components such as covered in this video, is the danger is not understanding or having access to all of the "hidden" processes which might have been accomplished by the OEM of these parts. I have experienced or been involved with a number of failures of these types of reverse engineered parts. You might have been 100% compliant (or even over engineered) the original fabrication processes, or on the other hand, may have missed a critical step. Examples would be stress relieving, passivation, shotpeening, pressure testing or non destructive inspection. These types of processes can be "invisible" on the finished component but might be extremely critical. I recall one particular component on a jet engine which had been reverse engineered by an overseas airline. It was simple flat spacer used in the bearing assembly build up. A very critical hardening process was not followed and which resulted in internal thermal stresses during engine operation. These fabricated parts lead to a number of extreme engine failures resulting in a number of aircraft emergency events. After investigation by the FAA, an Airworthiness Directive (AD) was issued which required inspection of all suspect parts within a very short time frame. Obviously not all parts are as critical, but I would just like to point out that such consideration should be made anytime that reverse engineering is accomplished. Sometimes there is justification for the high cost of a factory replacement part. I would just recommend caution to anyone attempting these types of reverse engineering, to understand an critical stresses which this part might be exposed to. High pressures, thermal expansion, vibration, single path structural loading, are a few examples. Please keep up your excellent videos and instruction, but perhaps offer this type of caution.
@nathaniellangston5130
3 жыл бұрын
The guys at our shop tend to not want to use our old horizontal mill. I'm definitely inspired to give it a go though!
@planetwisconsin9901
5 жыл бұрын
K and T mill runs and sounds nice! By the way when I was a kid we lived down the road from Kearney and Trecker, in West Allis Wis. Around 1966 to 1975.
@cbmsysmobile
5 жыл бұрын
Love seeing you doing these manual fabrication tasks. My all-time favourite was your series on the K&T Parking Attachment
@henrikjorgensen1614
5 жыл бұрын
Adam you are a extremely skilled craftsman and i enjoy to see you in work
@Marcywm42
5 жыл бұрын
A tour de force. So many interesting operations to do these pieces. Thanks again Adam.
@groundcontrolgainesville4841
5 жыл бұрын
Adam, you can use something soft like plastic as a buffer between the movable jaw and the stock to clamp multiple pieces.
@dennisleadbetter7721
5 жыл бұрын
Hi Adam, a nice finished product, and some interesting machining techniques. Perhaps you can use the boring head to do the radius inner face on the other ones after you cut the bulk out straight. Regards Dennis
@RustyInventions-wz6ir
3 ай бұрын
Very nice work. Nice to watch a pro working.
@biancacalloway228
5 жыл бұрын
I'm digging the matching vise stop and parallel keepers💪
@nebtheweb8885
5 жыл бұрын
Love your use of the moving 'frame of reference'. By fixing the camera to the moving table(5:39), it makes it look like the cutter is the one that is moving from right to left. The slow motion was something to see too. Great job!
@TheMisterGege1
5 жыл бұрын
You should do a collab with the slo-mo guys to get some nice slow motion footage when cutting metal
@rolandoderamos470
5 жыл бұрын
I'd love to see that too.
@Patriot1776
5 жыл бұрын
Adam, you've invented a new shop machine tool! In this episode, you turned the K&T into a Rotary Shaper as somebody has already put it, with how you cut those bevels in the end!! XD Also really, really enjoyed seeing you use that 7" diameter cutter to put that arc into the edges of those clamps too! Perfect examples of just what the K&T can do when its in 'vertical mill' mode, things that a Bridgeport-style mill would be crying 'Uncle! NO MORE! PLEASE STOP!' to! XDD
@johndcknsn
5 жыл бұрын
4 "Replacements" made better than the originals.
@LabRatJason
5 жыл бұрын
The chatter on that radius actually looks kinda cool. Almost like it was supposed to be there.
@hiltoncrocker2927
5 жыл бұрын
With regards to the work pieces been different sizes if you place a piece paper along the moving jaw and clamp tightly the paper will compress and take up what small difference there is and clamp both work pieces tightly in order to machine them I’ve been doing that for along time and seems to work ok. Keep up the good work Adam a shout from Hilton out here in South Africa
@Chris-pb3se
5 жыл бұрын
That 7” cutter is the most Abom thing I’ve ever seen. There’s more cutting edge on that thing than Stefan has in his whole shop
@Shoorit
5 жыл бұрын
I can do anything and everything on a CNC machine but I still watch and enjoy all your videos and can always learn something as well.
@Kelly-ip8nn
5 жыл бұрын
just about to say the same thing. I've got a cnc mill and lathe at home and hardly use them. More fun playing with the manual machines
@konradbrat
5 жыл бұрын
Very creative use of tools. Another equipment from Poland in action. I am waiting for part 2.
@henmich
5 жыл бұрын
I thought stainless was impossible to machine.. (based on some other videos I've watched), but here you are pumping them out like a boss..
@theboiwhohasnoname
5 жыл бұрын
No problem with stainless, just a bit tougher is all. With the right tooling makes life a lot easier :)
@Abom79
5 жыл бұрын
Nothing hard about machining stainless, it’s just a tougher materials and you gotta know what tooling to use with the proper speeds and feeds.
@theboiwhohasnoname
5 жыл бұрын
@@Abom79 not sure if you saw my comment but if you wanna stack multiple parts in a row in vice. Stick a piece of paper on the fixed jaw or g clamp with pieces togethor:) works great for me
@sinkosav
5 жыл бұрын
Stainless is joke compared to HARDOX 450 at around 43 to 47 HRC Rockwell... high abrasive resistant material,used for heavy machines and armor...
@sinkosav
5 жыл бұрын
there is also free cutting stainless,many different grade is available...
@KSparks80
5 жыл бұрын
Those hold down clamps are very similar to what is used on a lot of firetube type boilers that have flat plate front/rear fireside doors to clamp them shut. They'd be used to draw in and hold the door to the shell, with a high temp rope or blanket pinched between them as a gasket for the combustion gasses. They were always called "dogs".
@BerndFelsche
5 жыл бұрын
If you have a rotary table then you can cut "any" large radius by rotary feeding the part past a milling cutter. Just another way of getting the same result. P.S. seems like some lessons carried over from the cutting tools for the shaper with that bevel.
@djtheg6819
5 жыл бұрын
If you blasted the holders with something like glass, you could dull the finish a little and probably not see any of the chatter in the last cut and give a uniform color and texture to the whole part.
@DanBowkley
5 жыл бұрын
Better than OEM...I kinda get the feeling if I dropped a Chevy off with you and said "build me one of these" I'd come back and pick up a Ferrari.
@johnboyd7158
4 жыл бұрын
Yes. Drop off a 65 Nova, with a 235 CID inline 6. Adam does his thing and pick up a 427 CID V-8, stroked, bored. Ported an relieved snarling beast.
@LegoMan-cz4mn
4 жыл бұрын
Hi Adam, I have been watching your video's for a little while now, and even as a woodworker I have learned a lot! I am now even more precise at measuring and marking thank you, take care!
@SUPERDUCKcromobe
5 жыл бұрын
This is how I always make stuff with a lot of improvising thank you for sharing I learned a lot, also you can never have too many different kinds of tools on hand waiting for the right condition to come along.
@kellerrobert80
5 жыл бұрын
Best video of the last few weeks and why I subscribed. Nice work.
@alexjamieson3822
5 жыл бұрын
Excellent work as always! When you were doing the bevel I thought you were going to set the piece in the vice at 45 degrees and plunge down in the Z axis. You could have used the same 7” cutter as you used for the step. May have produced less chatter?
@giorgioisgaming5814
5 жыл бұрын
You Sir, are a true perfectionist 👍🏻
@michaelmiller5566
5 жыл бұрын
I love videos like this. All I have is manual machines so this allows us to see the many ways to tackle complex shapes. Just awesome!
@jimmya4217
5 жыл бұрын
Also should put another hold down clamp in the other side of the vice to stop it from kicking sideways and having less surface area holding the part. I do like watching your videos cos I don't get to use any machinery anymore. I don't want to sound negative, just like to give some tips.
@randyruppel6727
5 жыл бұрын
Now that's an Abom video
@bcbloc02
5 жыл бұрын
You figure out a good way to cut curved shapes on the shaper I could see it doing this work.😎
@Abom79
5 жыл бұрын
Rotary table and universal table set up on an angle 😎
@marcellemay7721
5 жыл бұрын
Love that K&T mill! Your pieces came out so much nicer than the originals. It's nice to have all those different cutters, it really speeds things up. I'd have to be a little more creative with the limited variety of cutters that I have. Either do it on the lathe with the 4 jaw or a rotary table on the mill..
@pneumatic00
5 жыл бұрын
Helluva lot of millwork on those little clamp pieces. Very nicely done. 7" cutter looks like it's running backwards (I know it's an illusion) at 1x and 1.25x playback speed.
@DonkeyDongDoug
5 жыл бұрын
I've had to cut some radii like the first ones you cut, but not that large. I just used my fly cutter and set the length of the stickout of the bit off of the center of the cutter. probably wasn't dead on, but close enough for what we were doing.
@davidmotoman4956
5 жыл бұрын
That was very interesting how you work out your angles and holding the blocks to get the finished product. Cheers from Australia
@austinyun
5 жыл бұрын
I don't own a lathe, mill, or drill press. Probably never will. I'm an electrician. I've still spent tens of hours watching this channel for some reason.
@dcw1540
5 жыл бұрын
You can make anything.love what you can do. Thanks
@rrabbit1960
5 жыл бұрын
Glad to see the K&T getting some workout! Great job! Thank you Adam.
@Sicktrickintuner
5 жыл бұрын
As for bandsaw blades, found a cheap deal locally and it was a starett m42 blade. Also works well.
@FredMiller
5 жыл бұрын
That K&T is one rigid piece of equipment.
@Kineth1
5 жыл бұрын
Honestly, when you mentioned that large radius I expected a trip straight to that boring/flycutting tool... I forgot just how many ABOM sized tools you have!
@MikeBaxterABC
4 жыл бұрын
LOL ... I am a little bit surprised Adam didn just start with a 10" diameter Stanless Steel billet and machine it all from that alone :)
@emeltea33
5 жыл бұрын
Since you're swinging that chamfer by hand, and still getting a slight amount of chatter, could you clamp a plate up some how? Perhaps it'd work as a gusset and stiffen it up that last little bit?
@Platyfurmany
5 жыл бұрын
Adam, I grew up in a cabinet shop building furniture and cabinets and that is my perspective on watching your tools operate and your processes and comparing the way you mill metal compared to the way I learned to fashion wood on power equipment. Utterly fascinating!!! I really love the slo-mo action of your milling machine in action! I have often wanted to watch shapers and planers in slow motion but never have found that kind of video on KZitem. I have a question about your 7-inch milling cutter... I've noticed the same problem with a couple of other cutters you have. Do you touch up the grind on your cutters yourself, or do you send them off for that when they get worn? That really surprises me that they are not ground true to the centers! One of the ways I could tell it was time to send off saw blades and shaper heads for sharpening was when they wore down out of concentric from the centers. Also, I could tell if they were out of round by the way that gum would accumulate on the individual teeth; teeth that were short would invariably have little to no gum buildup on the cutting surfaces. I never had that problem with newly sharpened instruments.
@tomahoks
5 жыл бұрын
15:02 little buggger has no change!
@TheGasTap
5 жыл бұрын
Great work Cuz! Thanks again for the help this weekend
Пікірлер: 385