Ok, so I had the same problem, my stapler didn’t work and I did all this research, but nobody had the solution. Eventually I worked it out for myself and I will share it with you. After years of good use my stapler started jamming. I tried oil, and filing the hammer. It wasn’t that! The constant percussion of the stapler had fractionally compressed the joints where the staples come out. I looked carefully at the exit of the staples and realized that the staples were not flowing freely from the exit. With a screwdriver I LIGHTLY reopened the passage so that the staples could be pushed more easily by the spring and hey presto 🎉 the staples aren’t blocked and work perfectly as new!!! Years of frustration ended. I hope this helps you. DK👍
@kevinspeight4664
Жыл бұрын
Your definitely not alone good sir. Thanks for the info
@jodidavis6595
2 жыл бұрын
I can’t believe how more often these staple guns DONT work than they do. I have bought at least 1/2 dozen over the yrs
@StefanosTiles
3 жыл бұрын
This is really nice, first time I look for a video and find the problem, not the solution. Good job
@declanosullivan7649
4 ай бұрын
Same problem here, turned out the staples were at fault. I went to my local diy and got the right ones! Now tis working👌🏼
@loricampbell4174
2 жыл бұрын
mine doesn't say "load at the bottom" so thank you that did help.
@interalia200
8 ай бұрын
The firing plate doesn’t retract enough to let the next staple load. Take the loading carriage out, turn it upside down and squeeze the handle a couple of times. You can see the firing plate moving. Now file it down a bit, half a millimetre is plenty. Now it won’t miss any more.
@aylindsfsd3267
6 ай бұрын
I couldnt understand how to file down😔
@personalised-knives
4 ай бұрын
NOW THATS GOOD ADVICE!!
@bigfig77
3 жыл бұрын
Cool. Glad this video pops up to waste my time and offer no solution.
@josesche
11 ай бұрын
For what it may be worth after all this time. Your staples are too narrow, that it why you had to force it closed. So they cannot slide freely to feed properly. The sizes you showed refer to the depth of the legs, not the distance between the legs. As shown on the box it takes Stanley 1-TRA200 but the box of staples says 1-TRA705T.
@parkerellis6761
Жыл бұрын
This video was very helpful I have been loading the staples in all wrong
@leesmith9360
Жыл бұрын
Me too so loaded right now. Still doesnt shoot the staples. Problem is not made in USA. And of course no instructions at all. hubby can try. Will return for refund if he cant get to work. Stanley used to be a quality product.
@kirkD9349
Ай бұрын
Put the staples in from the bottom, as you showed, and the staples started coming out! Thanks!
@MariaMaria-sd9hl
2 жыл бұрын
I had same problem today and I found the solution for it by myself. the staples I was using are for it okay but they were bad quality, very thick as the one he’s using in the video. I found a different kind I bought before and they look thinner even tho they’re same size.
@user-vk7xm2gt7x
6 ай бұрын
Hey bro nice video. I fluffed around with one too not working and the logistics to take it back cost more than the product What I noticed on mine was the spring thing that pushes staple in had a notch at the other end that needed to be twisted so it was pushing on the staples in the right way rather than angled. Could do with pliers
@kevinspeight4664
Жыл бұрын
Bought 1 from Walmart last week it worked 3 whole staples before it would not work at all
@snobird33
11 ай бұрын
yes, I was loading staples wrong, now working Thanks!
@ardithconway2091
Жыл бұрын
Thank you! Your demo showed that I was loading the staples wrong
@SMNTHACL
2 жыл бұрын
Omg i can’t believe im here lol ! 😂 i hope this work for me.
@FLINTSTONES45
7 ай бұрын
You have to put staples on the sliding metal that you inserted
@personalised-knives
4 ай бұрын
Obviously you need the right sized staples, but for those of us who have the right staples, there can still be a log jam. Keep your apertures free flowing and all will be well.😅
@OsvaldoZavala-qo2xp
Жыл бұрын
Nice expertiese
@maartengroen5681
2 жыл бұрын
It works on parkside 8mm staples :]]]
@anntonetteaustin6813
3 жыл бұрын
Thank you! I thought it was broken
@stacyarrington340
2 жыл бұрын
I did too. Lol
@grannieannie9421
2 жыл бұрын
@@stacyarrington340 me too!
@natesettles9126
Жыл бұрын
Hey bro you put the stables in first at the the top when you slide it down
@imomifysupport4543
3 жыл бұрын
Did you ever find out why? I’m having the same problem.
@aliciaweyi204
3 жыл бұрын
I need to know
@aliciaweyi204
3 жыл бұрын
Mine is not working
@ronaldblamble8206
3 жыл бұрын
Incase you're still trying to get your stapler to work you put the staples in the part that pulls out of the back of the stapler
@imomifysupport4543
3 жыл бұрын
@@ronaldblamble8206 thanks
@Murakulous135
2 жыл бұрын
@@ronaldblamble8206 Finally! Thank you!
@ubaldocervantes1497
2 жыл бұрын
Como funciona la pieza que empuja las grapas de engrapadora marca apex
@nazneenjalal4814
10 ай бұрын
I am about to cry . I am redoing an old ironing table halfway my stapler stops working 😢😢😡.
@johntyler1441
Жыл бұрын
Mine was made in Taiwan 2006. Doesn't say to load staples from the bottom.
@karenmyers2185
2 жыл бұрын
You have it in upside doown
@kerlyyanqui2481
Жыл бұрын
Me ayudo mucho gracias.
@bondjunior2005
2 жыл бұрын
The steamples are too tight they dont have enough place to mouve ( slise) it should move inside very easy so that you can shoot the steamples out . Wich Bauhaus is that ? In US ore Germany ? Or sommwere ellse ?... good luck budy 🤞🤞🤞
@lil2767
2 жыл бұрын
Are you serious right now? You have A type staples stapler, but trying to use G type staples in it. LOL. It's crearly visible that stapler chamber is wider than staples.
@kenkejas14
Жыл бұрын
It's because they are selling it next to each other, probably bauhaus doesn't even know that It's the wrong kind
@soniaflorencio5343
Жыл бұрын
Ame issue my stanley its very bad qualitu not working
@yoselinsantana8588
2 жыл бұрын
Se me a Tasco la mía no la puedo usar por favor alluda
@ajaypala3475
Жыл бұрын
It simply doesn’t work.
@fatimahtorres8105
2 жыл бұрын
Junk
@Lizzy514
2 ай бұрын
You loaded staples incorrectly
@jlstv2670
2 жыл бұрын
put some oil.
@user-sn7pg5vr8k
Жыл бұрын
Hello, you are using the wrong staple. This tool is an LD stapler and you are using an HD staple.
@judeflynn9223
2 жыл бұрын
staple size is wrong
@eric1234ify
Ай бұрын
best bet, throw it away. Its garbage. Start over
@jenniemargison7934
Ай бұрын
Lie. Scam. Click bait..
@fanbutton
2 ай бұрын
You probably bought it from Walmart, which buys its tools and pretty much everything else from China. Stanley making its stuff in Mexico and China now, so don't expect good workmanship from their tools anymore as they hire very, very cheap labor which results in very, very poor workmanship. If it don't say, made in the USA or Germany, throw it in the garbage.
Пікірлер: 57