How did you done the Sequence ? Resolve detects every image as itself in my case
@kalpeshb1649
3 күн бұрын
Hi, my image folder when I import into the Vinci, it doesn't recognise as it sequence. It imports as individual images. What should I do? Thanks. Do I need to buy the Vinci studio?
@GovernorBandicoot
Жыл бұрын
This is the video I've been waiting for! :) I've often struggled with stabilization using DaVinci Resolve as the subject always tends to warp a bit - doing a second level of stabilization is working like a charm!!
@MatthewVandeputte
Жыл бұрын
Glad it was helpful!
@MyEyePhotography1
3 күн бұрын
Excellent. Post shoot pint, best advice.
@petejobson5036
Жыл бұрын
“Once you’re done you’re gonna go for a post-shoot pint” cheers to that! 🍻
@ProfessorBear510
Жыл бұрын
I tried this. did I miss a step when i tried to load the folder it just gave me all individual photos not a sequence.
@Rikarious
Жыл бұрын
same
@bekirdonmeez
Жыл бұрын
l found the solution Go to media section and there is 3 dots its says frame Display mode change it to Sequence
@rymac320
Жыл бұрын
@@bekirdonmeez hmm that didn't work for me...
@XavierOrtega2
4 ай бұрын
@@rymac320 For anyone looking at this in the future, the 3 dots are on the top (near the image), and what I did was select "Sequence", remove all the images, and upload them again
@lks2387
5 ай бұрын
How you export the pictures from lightrom to use ist in davinci. When i import the picture to davinci, ist singel picture.. i need help
@pithecusaustralo4452
Жыл бұрын
how to make all the photos (over 100 photos) into a Video clip in Aftereffect or in other editing programs?
@MatthewVandeputte
Жыл бұрын
Check all my tutorial playlist
@VINsanteC
11 ай бұрын
why is my images are not seeing as sequence
@gamerfrenzy61
Жыл бұрын
Your videos are all ways helpful respect to you . I am second to comment !!!
@MatthewVandeputte
Жыл бұрын
Thanks a ton
@DonnyWesthouse
Жыл бұрын
What a legend! The tutorial I've been waiting for 💌 And just look at those cityscapes!
@robf8496
Жыл бұрын
Great tutorial.....Well done....Straight to the point and no BS!
@MatthewVandeputte
Жыл бұрын
I appreciate that!
@toomasvendelin
Жыл бұрын
Straight to the point. Thanks!
@carrythetruth20
Жыл бұрын
The assumptive that you "just drag the folder of sequenced picts" into DR is just that, an ASS-umptive. I've tried 4 different "sequenced" series tutorials (including this one), every one of them imports each pict as a separate 5 second-timed still upon the 300 images; reducing the image file count did not resolve. I've reviewed 3 other independent "how do to hyperlapse in DR and they all state similar to what you've stated. All ASS-umptives. All fails. The ASSumptive tutorial statement: "It (DR) will recognize it (the folder of sequenced images) as an image sequence..." Another ASSumptive is that the user already knows DR; you need to preface all your vids with a "getting started" link if you've created one. If not, create one to link to, especially as to your setup, as this is very important for new users as not to be looking around for objects you reference but may not be displayed on their UX. You use the phrase "media library", but there is no object / window / UX denoting "media library". You also ASSumptive on Bin1 & Bin2, but then new user isn't aware of this. Definitely a "10" as to an ASSumptive tutorial.
@carrythetruth20
Жыл бұрын
Ah, your most major ASSumptive is you do not use "Studio" in either the title of the video or within the video itself. DR-Free will not do speed-warp re-timing. DR-Studio will, at $295, will do speed warp re-timing with its Neural Engine. Yup, yer an ASSumptive all by yerself.
@MatthewVandeputte
Жыл бұрын
Maybe instead of wasting everyone's time with this ASSinine comment, you can go to a beginner tutorial about DR before trying an advanced method, thoughts?
@luccianibossa829
Жыл бұрын
so... AFX or Davinci? ;p
@mamunoz23
11 ай бұрын
This might be a stupid question, but are you using JPEG’s or raw?
@MatthewVandeputte
11 ай бұрын
jpegs for the demo, raw irl
@BernardVideo
Жыл бұрын
thank to make tutorial
@twosheafilms
Жыл бұрын
This video is SICK. Not sure if I was supposed to see it because it's unlisted, but it was in the end cards of your most recent video. I've seen similar tutorials and I understand the concept of how to do this, but I -never- very rarely do this technique. It's so satisfying. I'm in Sicily until this weekend and I should really try this if the weather clears up. I also need to make the jump to DaVinci. I enjoy Final Cut, but I feel like DR is more powerful.
@MatthewVandeputte
Жыл бұрын
Haha yeah definitely didn't mean to share this one yet so well done on finding it 😂
@carrythetruth20
Жыл бұрын
"SICK" of ASSumptives, yes.
@adrienb5960
8 ай бұрын
mmmm, does not function when i import my file.... wondering why... Do we need a special export from lightroom or something?
@kevin-haggerty
8 ай бұрын
Subbed from the video dude. Just needed a few tips for the Davinci. Lets create the heck outta 2024!!
@manonthebike
Жыл бұрын
Привет, спасибо большое)) я очень рад, что нашёл этот урок. Я снимаю с груди на велосипеде и после этой обработки мой таймлапс стал крутым!
@EvilGenius-PNW
3 ай бұрын
great video, thanks for the clear explanation. learned a lot in a short amount of time, i'll like and subscribe to that ;)
@SmartMeditationFilms
7 ай бұрын
Thank you! You are good at this! Why do I like the After effects example more than the Da Vinci?
@ianharper6015
Ай бұрын
Another vary useful video. Thank you.
@NihalUsman
6 ай бұрын
You know what I'm talking about ...❤❤❤ Thanks Bro❤
@bekirdonmeez
Жыл бұрын
my Davinci doesn't recognize as 1 file don't understand why
@bekirdonmeez
Жыл бұрын
ok l found the solution Go to media section and there is 3 dots its says frame Display mode change it to Sequence
@rymac320
Жыл бұрын
@@bekirdonmeez still all individual png's...
@Jaydoublyou
7 ай бұрын
do you edit photos before or you do edit the entire timeline as if its a video?
@ApeiroAgency
11 ай бұрын
What about tracking stab as we were doing in Ae?
@tomavellino9553
Жыл бұрын
Hello Matt, I have a question hopefully you can answer. I use AE and DaVinci Resolve. If I import a .jpeg sequence using a 4:3 composition in AE and do all the tracking and motion stabilization, then export in a 4:3 format, I can take that video file back into AE and create a 1080 composition and scale down that footage to 33% (24 mp images)and have a lot of room to scale up footage without losing resolution, the problem when I import that same footage into DaVinci 1080 timeline the footage is cropped? I have to scale up to fill the frame. Why does this happen? I thought I would be able to scale down the footage as in AE, I have seen this done with Premier Pro, not sure why I cant do this in DaVinci ? Thank You.
@MatthewVandeputte
Жыл бұрын
Are you importing a 4:3 video file into a 16:9 timeline? That'll look cropped
@wildpatagoniafilms16
Жыл бұрын
Forgot to ask... do you have workshops or tutorials on how to use LRT...? Also: do you use sliders with motion? any in particular...? thanks! great posts mate! cheers!
@MatthewVandeputte
Жыл бұрын
I use the Syrp system for motion control stuff, am working on a new video soon for this channel but have covered motion control as an entire chapter in my online course!
@Arthurfdlp
Жыл бұрын
Thanks, your video helps me a lot :) From France 👋🏼
@MatthewVandeputte
Жыл бұрын
merci
@tomavellino9553
Жыл бұрын
Great Tutorial, as noted in the comments possible tracking video in Davinci Fusion page, Planar tracker, there is also a point tracker in fusion, I personally have had no success with that.
@MatthewVandeputte
Жыл бұрын
planar tracker was tricky, I've made the point tracker work well last night, video coming soon
@lordofbokeh7817
Жыл бұрын
Hey Matt, remember when we met at Sydney for the hyper lapse workshop and Sydney harbour was full of bushfire smoke lol ahh good old times, anyways I wanted to say you forgot to mention what frame rate you set up the timeline? what would you recommend? default is at 24fps in davinci
@MatthewVandeputte
Жыл бұрын
haha yeah was a bit hazy then! I'm a 25fps kinda guy but it's personal preference
@coreyman00
5 ай бұрын
the import doesnt work :( all i get is images
@MatthewVandeputte
5 ай бұрын
works for me, just posted another video about how to do it
@coreyman00
5 ай бұрын
@@MatthewVandeputte thanks I got it working via the other method in the settings import
@robpullen
Жыл бұрын
I’ve been waiting for this one also. And how you stabilise it in davinci. Haven’t watched the vid as I type this. Sposed to be working lol.
@MatthewVandeputte
Жыл бұрын
Hope you enjoy it!
@robpullen
Жыл бұрын
@@MatthewVandeputtejust watched it and yep I enjoyed it lol. I’m surprised davinci actually stabilised it that well but loved the tip about making the comping clip and stabilising again. This is what I’ve been waiting for. Thank you.
@dalelotherington
Жыл бұрын
Great tutorial. I’ve been trying to shoot some handheld hyperlapses myself editing first in lrtimelapse6, then stabilise with these methods in davinci. I’ve noticed even with smaller multi pass stabilisation, it can still have very small movements from left to right shaking which can make it look amateur. I assume this is just a matter of improving the shooting stage and alligning the fixed point more or using a tripod. Is there any ways of improving these shoots in software further in your opinion? Also wanted to see is davinci in your opinion the next best software for stabilisation / timelapse/ hyperlapse creation that’s is a one time payment and not a subscription model? Would love the adobe suite but only shoot as a hobby atm and just not at the stage of spending that much money per month
@MatthewVandeputte
Жыл бұрын
Shooting on 35 vs 24mm can help you with getting it better in post, one of many tips covered in the timelapse course (and e-book!), I'm still figuring out if DVR is good enough for the whole workflow, there are limitations that LRTimelapse is just so much better at, and AE then is better at manually stabilising etc so there still isn't a one stop shop, but we're getting closer and closer
@wildpatagoniafilms16
Жыл бұрын
nice! As a person that uses DR, I am glad I can do it without using AE... I assume one can do a total post: beginning to end, with regular Time Lapses as well right? (using DR, that is...)
@MatthewVandeputte
Жыл бұрын
Yup, check out the recently added playlist about Timelapse in DaVinci Resolve, as well as my full timelapse course on www.store.matjoez.com which will have more videos added to it over the next two months
@wildpatagoniafilms16
Жыл бұрын
@@MatthewVandeputte thanks mate!!
@pablotejada9137
Жыл бұрын
How useful wwas that video💥💥💥💥💥thanks!
@MatthewVandeputte
Жыл бұрын
cheers
@flepsomat
Жыл бұрын
I think it's a great tool for basic stabilization, as a repacement for the warp stabilizer. But the use of point trackers in AE is quite powerfull (also quite slow 😅), do you think it's possible to use the tracking features of resolve for hyperlapse work? I just tried it out but it seems to me as there is no specific function for stabilisation like there is in AE.
@MatthewVandeputte
Жыл бұрын
I'm looking into more advanced tracking as we speak! If it's there then it's game over for AE lol
@JoelSchat
Жыл бұрын
@@MatthewVandeputte Been Using the Planar Tracker in the Fusion tab with some pretty positive results. Has a learning curve tho just like AE
@MatthewVandeputte
Жыл бұрын
hey broski! Good to see you here! I've just tested tracking nodes and am happy to see how they perform just like in AE. Will give the planar tracker a run as well, thanks for the info!
@willjohnsnow
Жыл бұрын
@@MatthewVandeputte Would be awwwwwwesome if you could do a quick tutorial for this more advanced kind of tracking for stabilisation. I'm not getting good results with the Similarity/Translation methods :(
@ShinilPayamal
Жыл бұрын
Thanks for this awesome turotial.
@MatthewVandeputte
Жыл бұрын
You're very welcome!
@nieograniczony1
Жыл бұрын
Thanks Matt it is simple and clear :)
@MatthewVandeputte
Жыл бұрын
Glad it helped!
@Fireandagrill
Жыл бұрын
when I drag the folder it doesnt recognise a sequence, just imports all the Jpegs individually
@MatthewVandeputte
Жыл бұрын
gotta import it in the right place inside DVR, try adding it in your media pool (or the other part that I'm forgetting the name of currently, all I know is that one window imports them separately, and one window does it like in the video)
@Fireandagrill
Жыл бұрын
@@MatthewVandeputte thanks for the reply, I'll experiment a bit. Not a big problem though as I was just able to create a compound clip from the images
@thurber_shots
Жыл бұрын
I've tried every screen and it only imports as individual files. Is this for version 18? Meanwhile I'll look for another tutorial on this because I really want to work with my hyperlapses.
@MatthewVandeputte
Жыл бұрын
@@thurber_shots maybe they are not sequentially named and this the software doesn't recognise it as a sequence
@grantrichmond120
Жыл бұрын
here is the solution | kzitem.info/news/bejne/mo9-nKqfpXl3d2k
Пікірлер: 83