Experiment with a crusher. Flat planes pushed down with pistons do a lot of damage.
@lily_astral
4 жыл бұрын
@Lachlan Strickland Works better if there's a lip on it to prevent them accidentally pathing onto it on the down cycle too
@usersicon
4 жыл бұрын
Saw Blades dont injure any type of bots. Just scares them. Saw Blades sometimes couses glitch to a bot can't be killed
@bodhidavis1691
4 жыл бұрын
they scare away haybots though
@willfaber3618
4 жыл бұрын
no they definitely do damage them.
@jameslee3941
4 жыл бұрын
yea thats right daryi cody
@Nyghtwolf007
4 жыл бұрын
omg I've had this too. The stupid small green ones become invincible and you have to quit to main menu and rejoin your game to fix it
@tokyo4633
4 жыл бұрын
Even though they don’t do damage, it’s reassurance to know the haybots can stay back. I’m using a pressing system in order to crush the bots.
@jhettmashford1375
4 жыл бұрын
keep this going !!!!
@turkeyboy5543
4 жыл бұрын
Here’s a fix for your logic: Set each sensor to Switch. Connect both sensors to an XOR gate. Connect the XOR gate and the on/off switch to an AND gate. Connect the AND gate to the pistons and the engine. It will never jam.
@zanderburt7103
4 жыл бұрын
The boss wouldn’t be scared of that
@MrPCLY
4 жыл бұрын
I see that you need lighting above the crops area. I grabbed a bunch of lights from around the area, painted and set to max easier to work at night. Also made a lift for my vehicle along with ditching the gas engine going with piston "NO GAS!!". Keep building
@henryking5403
4 жыл бұрын
add the switch to a piston that has the sensor on the end 19:50 although it's way better to have a crusher that comes down and squashes them
@zanderburt7103
4 жыл бұрын
The red farm bot is a boss!
@joeyjoyce6804
4 жыл бұрын
Cool idea but u should add 1-2 more saws so you have 3 spinning back and forth
@jimbo99jim67
4 жыл бұрын
love the vids man, keep uploading!!!
@botston
4 жыл бұрын
A vid a day keeps me awake
@Hllw-tw8my
4 жыл бұрын
10:30 calls saw blade a drill
@SmartLifeEnthusiast
4 жыл бұрын
Something I saw on a different Yt-channel (Moonbo): Have a crusher coming down on the bots. Insta-kill all both beneath you (you can put a saddle on a crusher to control it). There is some different in how it interacts with stuff connected to the ground and stuff not connected to the ground. Also, if you stick with the saw blade: why not have 2 saw blades , 1 on each side. This way, you have less pistons on both sides.
@lordsherifftakari4127
2 жыл бұрын
protecting corners is simple by placing a Saw in the corner proper and reinforced accordingly. to prevent gaps that might be exploited, stagger the blades by one block vertically so they overlap preventing direct contact to the wall proper. use two saws synchronized to run Back & Forth augmented by fixed corner saws.
@flouyume2020
4 жыл бұрын
This is basically Satisfactory
@jaegernelson7936
4 жыл бұрын
Make a car elevator so when the farm bots attack your base your vehicle can be safe by raising it into the air.
@jameslee3941
4 жыл бұрын
yea do it!!!!!!!!! pls
@RandomWasVeryTaken
4 жыл бұрын
@Jaeger Nelson - Bots only come if they come over your base (that is pretty uncommon) or if you plant food. If he doesn’t plant food, he won’t be raided. and even if he did, he can just move his cars so they won’t be hit. The bots *ONLY* go for the crops. They will go through anything in their way though.
@AbberjamUK
4 жыл бұрын
10:05 *Waves back at cook bot
@simasimson5798
4 жыл бұрын
The sensor thing: (I don't have the game so I'm just guessing based on real life): Try attaching it to other logic gate so it will stay on even if you turn off the main switch. I think that may be the issue. I'm not sure how things work in that game, but that's the idea because I think that cutting the "power" to the sensor when it is on is what makes it go haywire. Great videos and I think you are one of the most enjoyable guys who do scrap mechanic (one of, because Drae is the most enjoyable but it's just because he's so bad at it)
@GriffinShepardBasch
4 жыл бұрын
Sima Simson I tested this and your right, good thinking!
@Ulnias
4 жыл бұрын
I totally started the area like you did for your craftbot. Loved the idea
@kaptainkiwi
4 жыл бұрын
You need a scorpion drilling vehicle they are awesome as always great Vids keep up the amazing work
@PizzaMineKing
4 жыл бұрын
Finally some weaponised sawblades
@rockmeoable
4 жыл бұрын
Get the cows on the elavator.
@portal2fanreal
4 жыл бұрын
Have an OR gate before the sensors signal can reach the first gate
@AlexStraga
4 жыл бұрын
Yes, I also noticed this feature) But I have a horizontal strip bolted to the axis with a saw or drill at the end. And also, I have a small roof in front of the garage and I somehow attached a saw there, so that it just does not interfere. Bots get under the saw and go stupid.
@dylanmcawesome6616
4 жыл бұрын
You could just farm on top of your base and shoot the bots when they are under it so they can’t break anything
@atomspalter2090
4 жыл бұрын
you can use a and gate its really simple AND == if all inuts are 1 at the same time output is one OR == if any input is 1 output is one and if there is an n before it its just every combination just reversed. you can use logic blocks for many things. Oh and XOR means the output is one if exactly one input is one.
@Rathurue
4 жыл бұрын
Z, it's better to get gattling spuds than sawblades since they don't do damage. Also, physics exists in this game, and you can use it for *fun*. I made a bot ejector by putting eight max upgraded pistons under two ramp, each of the pistons connected to L pipes that's connected with a bearing to iron panelings. When the connected sensor detects bots, it will raise the pistons at full speed, flinging the bots away and ragdolling them so you can get free shots. Another device I'd made is botwash knocker, basically a piston-powered device with 4 large 'hands' made by anything you can get (wood, bots hand, stone etc) that continues to spin vertically like in carwash. Doing so will repel bots continually, even the large farmbot if you set the height correctly so it can't destroy the blades.
@shadowfox9098
4 жыл бұрын
you can have both sensors set to switch mode then connect them both to the xor gate. then connect the xor gate and the switch to the and gate and then connect the and gate to the pistons
@yoshang2099
4 жыл бұрын
you should just upgrade your piston to the max extention ... to get your blade closer to your wall
@DatTheDragon
4 жыл бұрын
All you need is one more logic gate set to and then connect one of your Sensors to the and gate along with your switch and connect that to a xnor gate
@elektro8808
4 жыл бұрын
Z1 gaming in ep 13: we need to build a wall
@z1992z
4 жыл бұрын
I just realize now how funny and hard to make it would be if you cretaed a amusement park. These stuff like pistons and logic doors open up a great range of possibillities.
@lolcraft9109
4 жыл бұрын
Yay another vid for quarantine times
@rigenawale4492
4 жыл бұрын
Tapebots also spawn in midnight raids
@naparoid5507
4 жыл бұрын
Saw blades wont do any damage but it will scare the bots off. They will keep on trying to find an angle to avoid the blades. You can stuck lots of blades around the wall and just take them out with the potato gun
@luthfansa2879
4 жыл бұрын
you can build controller, and attach it to your piston so it can have 15 long/piston, so you dont have to worry about using so much piston, and you can do looping with controller too
@Redridge07
4 жыл бұрын
Do two-piston system .... one from each side and meet in the middle
@Achilds01
4 жыл бұрын
Maybe go and learn how to use logic gates? I'm sure you need 2 of them to make a system that can be turned on and off from a switch.
@danielverba5035
4 жыл бұрын
You don't need logic gate only a level 3 controller wich is on loop an all the pistons connected to it
@Dont6Blink9
4 жыл бұрын
To power base defenses for saws and such zi, use a controller, it can control 10 per controller. Set the speed to 360 on activation and turn on loop. I would like to show you my base gates. I have sliding gates with a saw blade arm that drops down when you close the gates. Its all done through controllers and logic gates. Super easy to do. Email me!
@arrowtheprotowolf7017
4 жыл бұрын
Make a Wall-O-Saw
@CreeperPlayz
4 жыл бұрын
i cant belive you did it in 12:00
@aimeeolsen9953
4 жыл бұрын
your meant to crush the bots to kill fast love your vids
@riceisart9574
4 жыл бұрын
Me:oh its 2am its time to finally go to sleep Z1: im not gonna give u the chance
@bunnymerlin
4 жыл бұрын
I just finished watching the last one!
@apex7850
4 жыл бұрын
Do what you want
@Jose-uf5pl
4 жыл бұрын
Really good vid
@yoloboyhd9498
4 жыл бұрын
BEST SMS CHANNEL!
@Bigrignohio
4 жыл бұрын
Why not install a bearing and saw blade IN each corner to cover the last unprotected sections? Looks like the diameter would be just enough to cover the area the pistons take up.
@Unicornvault3788
4 жыл бұрын
U need an and gate to have the sencer to be dependent on the switch
@Skyhawk996
4 жыл бұрын
Did you know you can just build platform to put on the lift and smash the robots into the ground. As stuff on the lift doesn't interact with creations attached to the ground.
@Doom_Slayer0
2 жыл бұрын
you should use a And gate with the XOR gate
@simonair
4 жыл бұрын
It's probably a better idea to use a controller that is upgraded since controllers can use all 15 block push without the pistons needing to be upgraded.
@kojoypenaklukdunia9769
4 жыл бұрын
Build some stacks of the saws, so the big dude can't climb in
@cci2.064
4 жыл бұрын
Yay path finding issues
@gerickjarmon4590
4 жыл бұрын
Hello! May I suggest to make two more elevators the same way you have to get up to base but wide enough to drive your vehicles on! Also you might need to remove one sensor that’s side by side to the other end maybe! I haven’t gotten the game yet but plan to do so! Thanks for entertaining!
@spoileddj7873
4 жыл бұрын
Z1
@corytoop6359
4 жыл бұрын
satisfactory!
@gid519
4 жыл бұрын
Haybots at sometimes, aren't scared of saws, the green ones are. They back away if you have them on ur vehicle. Haybots back up if you're to high and they don't "see" the wall. Haybots attack my saws on my vehicle if it ain't moving. They smart yo. Build walls out of heads.
@CJayyy
4 жыл бұрын
Dope video!
@lanezane2085
4 жыл бұрын
I heard a cat at 10:19
@shanevoorhees3533
4 жыл бұрын
You just need an and gate running into the first logic block
@stiletto_ori3530
4 жыл бұрын
Are the Bots able to destroy Pistons? If they cant he could use them to Push them out horizontal so the Wall is untoucheble
@sheeplad803
4 жыл бұрын
Use a flip flop logic gate system, kAN as a video on it.
@charlesblack5239
4 жыл бұрын
nice
@chimeraklaw4673
4 жыл бұрын
Could use a bearing with controller set on a loop to move the saw blade left and right in an arc
@jameslee3941
4 жыл бұрын
you can make the craft bot go for infinity with how many things you have to make more
@jameslee3941
4 жыл бұрын
make a wood cuting car in a vid
@TheFithPotato
4 жыл бұрын
Spiny blade wall
@oliverpribila5443
4 жыл бұрын
Make piston engine for your scout car-it uses no fuel ( I find tutorial by kan gaming)
@Renzo-oj6bt
4 жыл бұрын
It's up to them though. Piston engine is slower than lvl 5 engine, its not ideal as a scout vehicle.
@lily_astral
4 жыл бұрын
@@Renzo-oj6bt Though it's a little slower, it requires no gas and has great torque. Perfect for an expedition vehicle. As a raid car, nah. Gas Level 5 all the way. Exploration though, hecc yeah.
@lily_astral
4 жыл бұрын
@@vablo7198 Lotta ways to skin a cat
@Renzo-oj6bt
4 жыл бұрын
@@lily_astral little slower? Its very slow compared to high leveled gas engine.
@theflamehashira1289
4 жыл бұрын
Don't get the Spud shotgun because you might get 3 bosses no joke
@darren8652
4 жыл бұрын
HOI. oh caps. :)
@4K_Edits7090
4 жыл бұрын
Trap from Prince of persia
@myaccountgothack3565
4 жыл бұрын
make a moving base using piston engine
@thegamersclub
4 жыл бұрын
I have to compliment you on your amazing content you pump out alot of content. No regrads on subbing to you
@smileyface8124
4 жыл бұрын
Your vedios are the best
@angeloinfinity3054
4 жыл бұрын
i wonder if it's possible to make a cow pen in the air like your crafting area
@cosmoflux8422
4 жыл бұрын
We will build a wall, and make scrap mechanic great again
@allyturnbull1308
4 жыл бұрын
Viewer #1
@neworox3215
4 жыл бұрын
Not first woohoo
@fynnbeaumont
4 жыл бұрын
Please do some more subnautica below zero episodes they are my favourite!!! Thanks!😃😃😃😃😃😃
@Edgar-us8mq
4 жыл бұрын
I think a better way to do it, would be to use a computer and loop the computer stuff. This is just a suggestion. We love you Z, your videos are amazing !!!
@yorkie1780
4 жыл бұрын
First haha
@slothmanthepug8755
4 жыл бұрын
Yorkie no your not
@S_Iren.
4 жыл бұрын
Найс! ))
@cloudy.628
4 жыл бұрын
Do you think drills maybe work as a defense?
@Sunrise18605
4 жыл бұрын
Dude eventually in the raids tapebots will come and get you
@hzyalpha
4 жыл бұрын
Christopher Marcelo Damasceno time to make moveing saw blade that roam the entire vacinity of base
@zanderzinn6510
4 жыл бұрын
You should build a wall
@DOOD317
4 жыл бұрын
oblesley you need a second logic gate
@zyanidwarfare5634
4 жыл бұрын
The bot is probably refusing to attack because the it wants to go around the blade to get the wall but whenever it tries to the blade moves so the bots ai doesn’t know what to do so if you made a moving thing like that all around your base bots wouldn’t go after your walls
@getnug4467
4 жыл бұрын
Bot smart
@oliverclark2540
4 жыл бұрын
Nooooooo Not the moo moo mechanism
@brekencornelius7273
4 жыл бұрын
hi
@jackkienzle5903
4 жыл бұрын
Use pistons not saw blades be cause on the dicription in the devblog they said that the farmbots are not a big fan with these sawblades
@SilverWoIf77
4 жыл бұрын
You can get infinite chemicals with a pump going into a large chest. Same setup as you would do for water just find a chemical plant with the pinkish liquid.
@kauronoma
4 жыл бұрын
Love the consistency!!
@roccopalladino7773
4 жыл бұрын
Keep it going love it!!!!!!
@zerowitches
3 жыл бұрын
I imagine buttons are meant to function upon press and/or release. Same for the switch. Can' t say how it worked in this game, but it seems like it is meant to send when the button is pushed. Switch on the other side sends the same way. Button sends so long as it is pushed in. Obviously the switch isn't meant to start pushed in so it does not get the command to send. Or how I see it working in my head anyways im no coder or engineer
@jameslee3941
4 жыл бұрын
do 2 vids a day ok!!
@HeeroYuy911
4 жыл бұрын
Quite a silly defense there is a large blind spot on each end where the saw will not hit.
@Jollyeye
4 жыл бұрын
why saw blade against metal, wasnt is supposed for wood?
Пікірлер: 191