We contacted Chris, contractor, to built a rear carport. From the beginning Chris and his crew were an absolute delight. Very professional, honest, deliver quality craftsmanship at a reasonable cost & time estimate was perfect. We are ecstatic with the final product & must say that the whole experience, from start to finish, was excellent. Highly recommed Born to Built for all your construction projects & looking forward to our next project. Thank you John & Carmen
@antoninosanti2956
Жыл бұрын
This is awesome however, it would have been nice if you went over all the details such as was it bolted or welded, the size of the metal and why you chose that, why the roof structure is not attached or resting over the 4 supporting beams…etc It will help so many rookies like me. Awesome work.
@sdwallyt
Жыл бұрын
Saw the welder up on a ladder run by a generator. Don't see one bolt on this thing of beauty.
@embededfabrication4482
2 ай бұрын
The cross beam isn't tied into the legs
@javierpinon2180
Ай бұрын
@@embededfabrication4482everything is welded together the first 4 channels are welded to the columns
@sdwallyt
Жыл бұрын
I've seen alot of metal carports, this one is by far the best. Thanks for the idea.
@jamesbondinspector
Жыл бұрын
It’s an ad not a DIY
@sdwallyt
Жыл бұрын
@@jamesbondinspector Looks like a DIY to me.
@imacrazy6872
Жыл бұрын
@@jamesbondinspector DIY all day long.
@yanbu000
3 ай бұрын
I'm collaborating with a project manager and a construction contractor in Eastern Europe on a carport project very similar to this one. It's made entirely of box steel columns (4 inch square) and joists, with columns securely embedded in concrete footings. During a windy spell reaching 60 mph, I noticed some structural sway when we were on the roof, which is currently plywood, but will be topped with terracotta tiles adding to some fears I have about the center of gravity. In a light-hearted moment, I exaggerated the swaying by pretending to surf. However, the seriousness of the issue became apparent to me, even though not everyone found it amusing. Despite initial reservations from the project manager and contractor, I firmly believe I need to insist on adding diagonal bracing for added stability, especially without solid walls. These braces will be positioned at 45-degree angles and adequately spaced between joist columns to ensure rigidity. Would love to hear everyone's thoughts!
@javierpinon2180
Ай бұрын
Yes would be more stable
@chrisfifield8583
2 ай бұрын
Hell yeah , good job boys that looks amazing !!!🎉
@cutweldngrind
Жыл бұрын
This looks awesome for sure. I plan on using 6" C Purlins instead of rectangular tubes on my build as they are bought locally.
@MrFreddarama
Жыл бұрын
Excellent. Well done. Would love if you showed more details of the construction. Specifically if you welded anything or used bolts. Thanks.
@porkchop41
6 ай бұрын
About as simple design as it gets!👍
@freesoul4346
Жыл бұрын
I would of liked to see more support to the structure. I am planning to build on facing the north winds.
@koreywhitt9484
Жыл бұрын
What material would you use for 25x30? I’m thinking of building my own. I just don’t know what to use.
@drewd7824
Жыл бұрын
How do you decide the footing size, for the steel ground posts?
@brookebennett7281
Жыл бұрын
What wall thickness and tube side are all your headers?
@michelleholmes8447
Жыл бұрын
Love the video, we are about to build a wood covered storage... yalls look good. #dothedew
@icaruuskoshiba529
Жыл бұрын
Is just fine to burry the columns instead of using anchor bolt method?
@embededfabrication4482
2 ай бұрын
How did you join things together? Bolts?
@prnd21turbo
Ай бұрын
Let’s get real. How much does it cost?
@feelnrite
9 ай бұрын
Is it sloped to the front? What does something like this cost?
@martinneps9387
8 ай бұрын
I have a 2 car garage but I also have a deck over my garage. How would this be able to be done? And I would want some kind of gutter system on mine. Do you have that kind of system?
@lanceolasiman5909
4 ай бұрын
How deep was the hole for the 5x5 post? Thank you in advance.
@djsloburnbeats7426
11 ай бұрын
What would be the cost for something like this?
@antoninosanti2956
Жыл бұрын
Do you have the list of materials for this??
@waverider1994
10 ай бұрын
Changes with measurements specs Il can help
@sirchopz
Ай бұрын
how long are the 5x5 post and the 2x4 channels
@superdeleon
4 ай бұрын
How much did just the materials cost you?
@josepena390
11 ай бұрын
Do the dew!! Good job!!
@funintheforecastnatsarahha1285
Жыл бұрын
How much did this structure cost? Great work!!!
@born2build_
Жыл бұрын
Materials run @ 3k Plus the labor to make
@wangarnold1529
Жыл бұрын
@@born2build_ did the labor cost another 3K?
@born2build_
Жыл бұрын
Depends who u get to build ! Usually labor cost is three times more than material cost and this day and age labor is going up got to adjust with the times or will get left behind meaning bankrupt
@stefanvalchev8066
6 ай бұрын
how much does it cost all of the steel mate ?
@rickylopez454
Жыл бұрын
This runs about 5k-6k in Dallas tx
@memod615
11 ай бұрын
Hello, are you in San Antonio? Intreated in a backyard porch roof attached to my home. 40’x20’ shade. Thank you
@shirichikudo2646
5 ай бұрын
please describe each size of the steel??
@machcongtai.4762
Ай бұрын
Hi Chris , You guys are pro. How is the thickness of the steel roof ? Thank you Chris
@24BLUEELMO
17 күн бұрын
Normally is 26gauge r panel
@user-bw5db1xl4z
Жыл бұрын
how long will that roof last and is it coated with a rust proof paint coat?
@born2build_
Жыл бұрын
Yes its rust proof galvalume r-panel will outlast any shingle material
@tifacola
2 ай бұрын
I'm curious what this cost?
@joziboy8673
Жыл бұрын
Why didnt you take it up agains the garage wall? Also no centre brace what stops the channel from twisting across the span with wind loads
@born2build_
Жыл бұрын
Won't twist rectangular tube ,fully welded at both ends,plus thick steel, customer didn't want attached to house
@josemontano1226
4 ай бұрын
The sheets will hold it from twisting
@MagicProductionZZz
Жыл бұрын
Whats the slope on this roof? 10 degrees seems excessive from what i read its standard. I've got to quote one
@born2build_
Жыл бұрын
Half inch drop per foot is recommended
@SolSurfer18
Жыл бұрын
what was the budget
@BigHomie030
10 ай бұрын
If it’s a 24x24 what size did you get the r panels?
@javierpinon2180
Ай бұрын
If you want to add gutter 2-3 inch over hang if you dont just get the at 24
@venegasenmerida6307
Жыл бұрын
What gauge?how deep?
@brauliohernandez817
Жыл бұрын
What type of black paint was used ?
@born2build_
Жыл бұрын
Oil
@pboperations
Жыл бұрын
How are the metal bean connected together?
@born2build_
Жыл бұрын
Everything is welded together
@arbenabdyli
8 ай бұрын
This will not work for places where it snow
@jbsbayarea1
Жыл бұрын
want to do someting like this , what average cost $ for a project like this?
@ariasjimmy4471
10 ай бұрын
Depends on the measurements
@BigHomie030
10 ай бұрын
$3-4k for materials
@angelf9800
9 ай бұрын
What was the cost.
@mpirokajosephmgcokoca2355
18 сағат бұрын
Why aren't you using galvanized steel?
@born2build_
12 сағат бұрын
They don’t make that size and if so about three times the cost
@dancar02
5 ай бұрын
I need a carport like this in my house. Where are you located at?
@born2build_
5 ай бұрын
San Antonio tx
@dancar02
5 ай бұрын
@@born2build_ you have to come to Georgia to buil the carport for my house. Where can I send you pictures of my house to give me ideas how to build the carport.
@born2build_
5 ай бұрын
@@dancar02 Chris.ortizconstruction@gmail.com
@born2build_
4 ай бұрын
@@dancar02 if the money is right I’ll go and build whatever u want!
@johnovegas
Жыл бұрын
engineering?
@MrBogdza
18 күн бұрын
Zise ?
@reyesgarcia7399
10 ай бұрын
😮
@jazmynravae
Жыл бұрын
price?
@BigHomie030
10 ай бұрын
I would say it’s about $6-7k
@user-wf4nx8nx2q
Жыл бұрын
Молитесь чтобы снега не было
@starke6666
Жыл бұрын
Pretty sure the screws holding the roof decking down should not be in the troughs where the water will flow over them. When the screw gaskets get old , they will leak.
@David-ky7bm
Жыл бұрын
R-panel is screwd on the flats not the ridges. It is done correctly.
@starke6666
Жыл бұрын
@@David-ky7bm it is not correct. That method may be manufacturers recommendation, but it is only to make roof more securely fastened. Manufacturer is looking out for themselves and not interested in roof leaking after screws/gaskets age. You cannot put 1000 holes in steel under water and expect it not to eventually leak.
@Handlebarrz
9 ай бұрын
@@starke6666most people would sleep better with the occasional dripping screw to seal up vs the anxiety of loose panels during the wind storms we get
@lucianasalles7272
Жыл бұрын
✒
@manuelvargas116
Жыл бұрын
How much cost just materials thanks
@born2build_
Жыл бұрын
Metal materials have been going up,I would say set aside @. 5 k for this type of materials
Пікірлер: 84