This is the first time I've ever seen this done on Video.Good to watch and learn.I learned the hard way re the bolt on the steering wheel.....I took the bolt completely off on my old Vaux Cavalier . Yes ,it hurt when the wheel came off and hit my face LOL .Hope you are well.Thanks for the invaluable information in regard to personal safety 🥲
@screwsnutsandbolts
2 жыл бұрын
Thanks Mark :)
@nenadgalic7434
Жыл бұрын
Great video and great help :) Thanks!
@screwsnutsandbolts
Жыл бұрын
You're very welcome
@cristianmanica39
6 ай бұрын
Excellent video !
@screwsnutsandbolts
6 ай бұрын
Thank you very much!
@FIXnMIX.
2 жыл бұрын
Best channel for peugeot 206 service, appreciate your effort.
@screwsnutsandbolts
2 жыл бұрын
Thanks very much :)
@emresertbas1173
2 жыл бұрын
Thank you man
@screwsnutsandbolts
2 жыл бұрын
You're welcome 👍
@petarpavicevic6799
Жыл бұрын
I thought about changing my steering wheel and adding the one from new 208 model. Is it possible?
@screwsnutsandbolts
Жыл бұрын
I'm not sure to be honest, sorry
@JaaWatDenn
Жыл бұрын
Hey. My Airbag Warning light is On after this. Do u know what i can do ?
@BenSake
4 ай бұрын
mine also...
@mb-ym9ku
6 ай бұрын
I replaced the com unit and now I get a screeching noise whenever I steer. Also the airbag light came on permanently. Ive checked the connections and everything seems ok. Do you have any ideas?
@screwsnutsandbolts
6 ай бұрын
Is the screeching noise coming from the com unit ?
@mb-ym9ku
6 ай бұрын
@@screwsnutsandbolts yeah
@top3romania
2 жыл бұрын
👍👍👍👍
@screwsnutsandbolts
2 жыл бұрын
Thanks !
@hermanandersson7753
2 жыл бұрын
My steeringwheel does not have a hole on the bottom…? How do I do
@screwsnutsandbolts
2 жыл бұрын
What type of car ?
@hermanandersson7753
2 жыл бұрын
@@screwsnutsandbolts Peugeot 206 2001
@screwsnutsandbolts
2 жыл бұрын
@@hermanandersson7753 Does it have an airbag in the steering wheel ?
@hermanandersson7753
2 жыл бұрын
@@screwsnutsandbolts yes, it says “AIRBAG” on the steering wheel
@dzenan9331
2 жыл бұрын
@@hermanandersson7753 Maybe your steering wheel is a bit different since it's a pre-facelift model. Try to find a video posted by GXsub.
@andikanurmansyah1216
Жыл бұрын
Hello, what is the grey module? Is that for horn?
@screwsnutsandbolts
Жыл бұрын
Yes it is
@belalkhader86
Жыл бұрын
What is the reason for the peugeot 2o6 airbag light to come on
@fiatalyaffa
8 ай бұрын
Same
@djpansetasthegreat2560
Жыл бұрын
I have "airbag fault" and "passenger airbag deactivated" lights on. Is there any point of doing this process in order to fix my problem?
@screwsnutsandbolts
Жыл бұрын
Has the passenger airbag been deactivated ?
@djpansetasthegreat2560
Жыл бұрын
@@screwsnutsandbolts No.... Thats the problem
@screwsnutsandbolts
Жыл бұрын
Could be a loose connection under the passenger seat. Is the fault light intermittent or constantly on ?
@djpansetasthegreat2560
Жыл бұрын
@@screwsnutsandbolts it is constantly..
@stuartleggat7176
2 жыл бұрын
Probably THE best instruction vid I've seen. Clear and easy to follow...you can't ask for anything more than this. Thanks for taking the time to record and upload this!
@screwsnutsandbolts
2 жыл бұрын
Thanks for watching !
@DavidCorke-fr3zn
Жыл бұрын
First class video, ultra clear and precise. Thanks for the information :)
@screwsnutsandbolts
Жыл бұрын
Thanks for watching !
@PompeyMatt17
2 жыл бұрын
very clear instructions and to the point..great idea about refitting the bolt to stop you nutting yourself with the wheel 😃
@screwsnutsandbolts
2 жыл бұрын
Thanks for watching !
@jesusdavidroldan8256
11 ай бұрын
What is the size of the torx tip? T50?
@screwsnutsandbolts
10 ай бұрын
Yes it's a Torx T50. I meant to add that into the video :)
@dzenan9331
6 ай бұрын
Very useful. This helped me for wheel alignment on my 206. Thank you.
@screwsnutsandbolts
6 ай бұрын
You're welcome, thanks for watching !
@dodikfirmansyah
Жыл бұрын
My best teacher 😃👍👍👍👍👍
@screwsnutsandbolts
Жыл бұрын
Thank you! 😃
@WeltDerReferate
2 жыл бұрын
have a 307 but was identical only that he finally says immobilizer is disabled and the car can no longer start. Do I have to reprogram the key?
@abdulwihed
7 ай бұрын
شكرا
@tiredhub3270
8 ай бұрын
Definetely, most useful video on yt. Saved me a lot of time.
@screwsnutsandbolts
8 ай бұрын
Thanks for watching !
@robertmcaus2057
Жыл бұрын
Great video thanks 👍 super clear. I just realised that the replacement clockspring unit that I bought is missing one of the two main airbag cables (the right one). Unfortunately the replacement unit was sitting in my garage for a while and too late to return to the seller. I don’t suppose that its possible to open up the clockspring units so I can transfer the missing cable from the old one to the new one? (the airbag cables come from the inside the clockspring unit, and the whole reason I did this job is the indicator wasn’t working reliably - faulty indicator switch.)
@screwsnutsandbolts
Жыл бұрын
I don't know if you can even open the clockspring to be honest.
@russtaylor9672
Жыл бұрын
Ive replaced the indicator unit but the headlights arent working properly? No side lights at all. Any suggestions? Your vid was really helpful.
@screwsnutsandbolts
Жыл бұрын
Were they working with the old indicator unit ?
@dedededy5618
Жыл бұрын
Super Video, Thanks
@screwsnutsandbolts
Жыл бұрын
You're welcome, thanks for watching !
@Synchrodipity
8 ай бұрын
I need to do this on a Citroen C1 but apprehensive about messing it up. Will I need a heavy duty torx bit + wrench, or will I be OK with something in a more 'consumer' price range? Useful video - thank you. :)
@screwsnutsandbolts
8 ай бұрын
You're welcome. You should be ok with a consumer range torx bit
@Synchrodipity
8 ай бұрын
@@screwsnutsandbolts Thank you - biggest fear is that I'll let the airbag off or something or sheer the bolt or something else stupid -- but I guess it's just beginner nerves. :)
@screwsnutsandbolts
8 ай бұрын
Just make sure you disable the airbag using the proper procedures and take your time. The process might be different on a Citroen so if you're in any doubt, take it to a garage.
@royalking0737
2 жыл бұрын
Owsome
@screwsnutsandbolts
2 жыл бұрын
Thanks !
@veloxrevolution1
Жыл бұрын
Sehr gut ,danke für das Hilfe. LG,
@screwsnutsandbolts
Жыл бұрын
Thanks for watching !
@PGTROMP
2 жыл бұрын
Hi. A mechanic changed the steering wheel air bag module. The face of the one he's changed it to is a different colour. I have the old one that is the right colour and looks brand new. Can you remove just the finished face and replace the bad one with the better one? I see it has side tabs all around it. I wondered if it's possible to get these off without damaging the module or it going off? Many thanks.
@screwsnutsandbolts
2 жыл бұрын
I don't actually know. I would not take any chances taking parts off the old one. It could be very dangerous
@PGTROMP
2 жыл бұрын
@@screwsnutsandbolts Fair warning cheers. I did think that.
@Gogata1964
Жыл бұрын
👍👍👍
@screwsnutsandbolts
Жыл бұрын
Thanks !
@olafwaga8498
2 жыл бұрын
Sehr gut gemacht, danke!
@screwsnutsandbolts
2 жыл бұрын
Thank you for watching !
@orionmengistu452
Жыл бұрын
Blessed u
@screwsnutsandbolts
Жыл бұрын
Thanks !
@jungamz
2 жыл бұрын
My car has the same locking method as your car. I Attempted to remove the airbag, but was unsuccessful. I didn't know what was the problem, because I didn't know the working principle of the lock. Through your video, I found out that I didn't have enough pushing force. Thank you~
Пікірлер: 75