What a complete pain to get through and terrible design by Ford. However, your video made it possible. Thank you.
@simonsays5979
9 ай бұрын
If you buy one from the dealer, it is probably one piece so you have to replace the entire thing. If you buy one from the auto parts store, it comes in sections so if it happens again, you can just replace the sensor. You can also buy just the sensor which comes with couplers so you can cut the original one out and couple the new sensor in and it works just fine. Not to mention it saves a bunch of time and money
@explorvistas-jimdiana145
2 жыл бұрын
My local Ford dealer wanted to charge me $900 to fix this, including $250 for the part. I found the part on FordPartsDirect for $159 from another dealer, plus $38 overnight shipping. After watching this awesome video, I had the job done in an hour. Of the two clips down front on the passenger side, the upper one was the toughest to remove for me. I ended up cutting the old tube and rotating the white button to the front. Much easier to reach. The new one snapped right into place. Also, I didn’t have to disconnect the wire to the air intake sensor. I just laid that tube over where the air cleaner was. My Escape runs like a champ! Thanks again for posting this! I owe you a beer!
@Chandlerite
2 жыл бұрын
Happy to help! If you’re ever out in NC, I’ll hold you to it!
@explorvistas-jimdiana145
2 жыл бұрын
@@Chandlerite, where in NC? I’ll be there next week!
@kcichon
Жыл бұрын
Thank You so much for that vid. It explains getting to this valve in the most practical way. I have used just a valve with shark connectors . Set was $45 backs. No need for removing whole plumbing. Just cutting off old valve and connecting new with shark connectors (came with a set)
@phillyspecial2506
5 ай бұрын
Where did you get the valve with connectors? I’m pretty sure mine is going bad.
@truckguy
Жыл бұрын
thanks much for posting this video. I had to go through this procedure a couple days ago, and it is indeed painful. The hard part was getting those old clips to release. In my case they were 7 years old brittle plastic that easily just breaks apart. The hardest two clips to release were the bottom left, and the one closest to the firewall.
@Noyola417
2 жыл бұрын
I cannot thank you enough for this video. My dad passed away before he taught me how to work on cars so KZitem is my teacher. This worked like a charm but you were right, it was a bish to work on and my arms are hurting, haha. All in all, I consider this a major win. Fixed my stalling after pumping gas problem AND I did it on my own. Thanks bro, honestly.
@Chandlerite
2 жыл бұрын
Sorry to hear about your dad. I’m glad my video was helpful!
@Duckhunterbow
Жыл бұрын
It looks like dorman offers just the valve itself. Cut the lines to the old one and replace the new ones with push connect fittings. I just ordered one to try
@Chandlerite
Жыл бұрын
A few people have commented that as well. That would certainly work, too. I would prefer to replace the entire piece but that’s just me.
@Duckhunterbow
Жыл бұрын
@@Chandlerite I put it in 3 weeks ago and it seems to be working fine.
@Chandlerite
Жыл бұрын
Great to hear!
@phillyspecial2506
5 ай бұрын
@@Duckhunterbowcan you please tell me where you ordered the Dorman part from. My 2018 Escape is dying/running rough when I fill it with gas.
@crbigring
3 жыл бұрын
Thank you! This worked perfectly for me on a 2013 AWD Titanium Escape. Part for mine was: CV6Z9D289S. A few comments: I took the wipers and cowling off just to give a bit more room to work on the back connection. I also took a destructive approach to removing the most difficult connection on the lower front of the engine -- I used a Dremel to cut the old hose close to the clamp. That way I could rotate it over and more easily depress the clasp, which made it easier to pull off. Without doing that, I couldn't get enough leverage in the tight spot to both depress and pull off at the same time.
@davidjsouth231
10 ай бұрын
I have a 2013 FWD Titanium with the same issue. Not looking forward to doing this
@edm.3494
Жыл бұрын
Thank you so much for posting this video. I couldn't have replaced the valve without it. The demonstration on disconnecting the connectors with the white and green clips was beneficial. I found that 4 of 5 of these connectors were difficult to disconnect. Practice with the top connector with only one hand. It helps to have strong fingers. It was painful, and I cut both hands working on these connectors. But I did it! I bought the assembly at O’Reilly’s. Part number for 2017 Escape is CP934. The assembly has connectors on both sides of the valve. If the valve fails again, then I will buy the assembly and only replace the valve, none of the hoses. Why didn’t Ford do this???
@Chandlerite
Жыл бұрын
You're welcome!
@joestockton7016
Жыл бұрын
Saved my ass, thanks brother. Couple of things I did differently: 1) for the lower one I reached up from underneath to release the clip using two flat head screwdrivers to pop it off. 2) i removed the cowl cover (had to) 3) the left clip I broke off the green tabs from one side with a flat head screwdriver.
@nstahlko
Жыл бұрын
A very common problem apparently as I ran into two other owners at the dealer where I picked up the part for 300$ Canadian. I was very careful and took a ton of time to do it. The parts desk also admitted to the issue being very common. Took me about 3.5hrs including driving car in, setup, detailing, watching the video and ofcourse swapping the part. I also took the time to lube up and grease several things under the hood too! One owner told me it happened first at 120k km which is my scenario and again to him at about 240k km... seems this part fails or becomes clogged after 120k km on avg. Part was on backorder with a long lead time had to go to a farther dealer to get the part. I will be attemtping to clean/fix the old part and try to reuse it when this happens again. #FORD change the design! Thanks for the video!
@Chandlerite
Жыл бұрын
Thanks for taking the time to leave a great comment! Happy to help.
@curtisgordy2964
Жыл бұрын
Great video, had this same code on my 17 escape followed your video got it swapped out pretty easily all things considered. My check engine light did NOT turn off immediately though. I had to drive about 50 miles before the light turned off on its own. Car runs great though everything seems fine. Thank you for the video!
@Chandlerite
Жыл бұрын
Great to hear!
@rufinoguillen6435
2 жыл бұрын
Wow dude thank you so much for taking your time to explain all this! You’re the man
@brendahiggins355
Жыл бұрын
No more ford for me, I had another ford with this same issue, now this one has the same problem, you would think there would be a recall or the newer ones would be fixed
@gordonrobertson2773
2 жыл бұрын
Thank you for a excellent video, going to tackle my daughter's escape today, really appreciate your time.
@Chandlerite
2 жыл бұрын
Happy to help!
@sunset758
2 жыл бұрын
If you’re like me you’re gonna want to save and DIY. But beware because this video is condensed just to give an explanation. Quickly figured that out when trying to reach the front clips in a very crammed area. Thanks Ford for making it difficult to work on. Lucky for me I enjoy fixing my own cars and I have a whole lot of patience. 😉
@florenbaron7111
4 ай бұрын
Ford makes unreliable vehicles and their stealerships are corrupt.
@hdevillier5119
2 жыл бұрын
Kind of annoyed that I'm getting this in my 3 year old Escape. Your video is extremely helpful and I think I'll definitely be able to do this myself even though I'm not exactly mechanically inclined... Thanks!
@Chandlerite
2 жыл бұрын
It is annoying indeed!!
@timhornswaggle1243
2 жыл бұрын
Have this problem on my two year old edge! Same problem on my 2011 escape but it was much easier to fix than my edge.
@danetaamu1355
Жыл бұрын
Awesome video only things is didn’t show how you get the clip off did u use hand or tool to reach the clip in the very back
@scottisbatman
2 жыл бұрын
This part is becoming very hard to find so one has to assume its happening more then Ford expected. Thank you for the video.
@ibuildshelves
Жыл бұрын
I went through 3 different local vendors for the part before I gave up and went to the dealership and paid $170 for it. Nobody had a good aftermarket part. Different connections, one had an extra hose and connector, one of the purge valves fell apart just taking it out of the box. At least Ford actually had the right part.
@Chandlerite
Жыл бұрын
Happy to help! Hopefully you’ve been problem free 😎
@roddoe7194
Жыл бұрын
You got it! It’s is a very expensive job!
@clastrag1
2 жыл бұрын
Thanks a lot! Great video (except for the music). I just replaced it on my 2013. Just a minor cuts on my hands but other than that it was pretty easy. Even the lower ones. Maybe it is different in the 2018 but on the 2013 they are easy to reach. The hardest one is the first one. Also, to remove it from the bracket I had to wiggle it a little it would no come off pulling straight.
@aazarzabal9250
2 жыл бұрын
I just find out that I have that code on 2017 escape🤯🤯, only 41k miles and something already failing, disappointing 😞, let see what my dealership says tomorrow, I want to add that I was filling the tank all the way, for the last, maybe four moths😔
@markgreen3693
2 жыл бұрын
Appreciate the video, Ford was goona charge me almost $800 to do this, got the part, bought a decoder and knocked it out today, it was a bitch to get done roughed my hands up but all good thanks for the help bro!!!
@Chandlerite
Жыл бұрын
Happy to help! Hopefully you’ve been problem free 🤘🏻😎
@andywebster9076
6 ай бұрын
72000 miles!!! Watch out you are going to have coolant intrusion into the lower engine block soon and need a new engine. Also a very common problem with ecoboost. Ask me how I know :(
@AdriftAndAtPeace323
4 жыл бұрын
Very informative marc. I had to do spark plugs on my escape a few months back and was ready to pull my hair out removing the wiper arms and all the panels just to remove the coil packs
@Chandlerite
4 жыл бұрын
DUDE! How've you been man!!
@AdriftAndAtPeace323
4 жыл бұрын
chandlerite Pretty good. Yourself?
@Chandlerite
4 жыл бұрын
@@AdriftAndAtPeace323 Doing great man! Its good to hear from you!
@AdriftAndAtPeace323
4 жыл бұрын
chandlerite Glad to hear and Likewise man. Feel free to hit me up from time to time haha
@Chandlerite
4 жыл бұрын
Michael Pine I’m not sure I have your phone number haha
@ackcbp
Жыл бұрын
Thank you!!!
@CJGausvik
2 жыл бұрын
Thanks for the awesome video. Question - did you get any better gas mileage after this procedure?
@Chandlerite
2 жыл бұрын
Happy to help. Yes, fuel economy improves substantially.
@packratswhatif.3990
3 жыл бұрын
Been there and done it before - but never again. Next time I am just going to cut out the purge valve and replace it with my own little electric valve. What a stupid setup and pain in the ass moment to replace. I did this two years ago and paid $140 CND for the hose-line assembly. Agggggh.
@Chandlerite
3 жыл бұрын
Yeah, it can be a super pain in the ass!
@mylifeinanutshell6931
Жыл бұрын
Just fyi this video has helped me today!! Thank you! ❤️
@Chandlerite
Жыл бұрын
You are so welcome!
@davidjsouth231
10 ай бұрын
I have the same issue on our 2013 but now I have a P2196 as a result of it running too rich
@timhornswaggle1243
2 жыл бұрын
Thx for the video. My 19 needs a canister purge valve replacement. I was sold the part but I’m assuming I need this entire hose assembly? Because I can’t find just that one part anywhere. If so, I’m wondering why the auto part store lists and sells just the canister purge valve? Any thoughts are appreciated!
@BrainiacHoyt
2 жыл бұрын
The valve is located by the fuel tank, in front of the rear axle on the passenger side. Nearly impossible to do on your own on the AWD models.
@heartfan305
3 жыл бұрын
🙏🏼 thank you so much !!!!!!!
@HWoodCreations
2 жыл бұрын
What a pain. Seems like we could simply cut and install a new purge valve and utilize the same hoses and connectors and leave them all in place.
@Chandlerite
Жыл бұрын
You would think!!
@thomasvita329
10 ай бұрын
Would this fix the LOUD vibrating noise that comes from the rear right witch then shuts down ENGINE, thanks
@alicewalkush6134
2 жыл бұрын
Hi thanks for the video. I purchased what I thought was the right part but it’s only the valve. Not with the spider arms. Is it possible to use this or do I need this whole piece? I have the p1450 code and car stalls everytime I get gas. Thanks!
@timhornswaggle1243
2 жыл бұрын
They also sold me the one part. Doesn’t make sense. Did you ever get this resolved? Thx.
@thunderroad7289
3 жыл бұрын
The number one cause of this problem is over filling the fuel tank.deal with it all the time. Once I tell The customer to stop filling the tank when it cuts off they never have this problem again
@Chandlerite
3 жыл бұрын
That is great information. However I never overfill my vehicles because of possible emissions related component failures. So I am stumped as to what caused this on this vehicle. Cheers!
@owens1544
3 жыл бұрын
While possibly true, I've just began to experience this issue on a 2017 Escape 2.0L at 75k and I've never over-filled the tank.
@Toffy93
2 жыл бұрын
@@Chandlerite I've heard this many times that over filing is the culprit. I have a 2014 2.0L Escape with 250k kms (155k miles) on it and I've just had to do my third replacement of this part and I always stop fueling at the cut off. So I don't think there's much truth to that. This part has never lasted me more than 3 years, with my very first replacement assembly lasting barely 2 years. My first two replacement assemblies were Ford OEM parts, this third time I've opted for the Dorman Aftermarket part (Part No. 911-774). Some say a faulty cannister vent is the culprit behind these purge valve failures. However, if you have an AWD model like me then there's no accessing the cannister vent without RE&RE the rear axle assembly which supposedly requires 10+ hours of labour. I'd say with 3 purge valve replacements over the life of your vehicle you will still come way ahead of even one cannister vent replacement on an AWD model.
@trifectamarc6705
2 жыл бұрын
I hate my wife’s 2017 ford escape..I have this issues along with a faulty heating core and transmission recall
@Chandlerite
Жыл бұрын
These vehicles do have some issues for sure - hope all is well with the car.
@mesia663
Жыл бұрын
Hi Chandler! I'm looking at these parts on O'Reilly and see two variations: vapor canister purge solenoid ($181) and vapor canister purge valve ($101). Which one is correct or are they the same? They also sell the purge valve by itself; is it possible to remove that part only and replace it in the existing hoses?
@lachondapeterson4715
Жыл бұрын
I wonder if the gas cylinder and this purge valve have the same code I don’t know what to do
@migu003
2 жыл бұрын
Do you think this will be the same steps for a 2019 Ford Escape SE 2.0 ecoboost?
@Chandlerite
2 жыл бұрын
Yes
@Justeez4free
3 жыл бұрын
Thank youuuuu!!!!!!!
@thomasvita329
10 ай бұрын
Sweet
@newfie-dean5803
3 ай бұрын
What drivability issues does this part cause?
@doomsdayjoy
5 ай бұрын
Wil this work on 2009 ford escape xlt.getting the same code,once I drive it and vehicle gets hot it will want to stall at the first stop,I usually wait in a parking lot to wait or shut it off,then turn vehicle on and continue to my destination,when I fill gas tank,it was hard to start till about the third or fourth try,I was able to get home.
@gwendolynupton-smith2993
2 жыл бұрын
My dealer wants to charge me $1600 🤦🏽♀️🤦🏽♀️. I have a 2017 ford escape titanium
@Chandlerite
Жыл бұрын
I believe in you!
@allawdinzalmai699
2 жыл бұрын
Awesome, where are you located
@lachondapeterson4715
Жыл бұрын
I can’t even find the part going on 5 months every time I gas up it’s stalls and act crazy whenever they do find the part with labor I gotta spend 800 and i made my last car payment a month ago 🤦🏽♀️
@dealerauctionnightmare4689
2 жыл бұрын
Ford screwed the pooch on this part. 2 disconnects on the purge solenoid would have cost maybe 50 cents, instead they want you to waste all that plastic.
@jeff7461
4 жыл бұрын
I was able to cut out the purge valve and replace it. Just have to heat the plastic tubes. I had the P144C code. Did this fix your issue?
@traceyjones2010
4 жыл бұрын
And this way worked like a charm saved a whole lotta money on labor and if I were to do it the way this guy is doing it would have been a pain in the ass.
@traceyjones2010
4 жыл бұрын
And this is why mechanics hate people like us they can't get over.
@Chandlerite
4 жыл бұрын
Yes it has fixed the issue completely. Install was not very difficult. I had thought about heating the plastic and doing that but decided against it. Glad it’s worked for you guys!
@lizwilliams6120
4 жыл бұрын
Where can you buy jist the purge valve. I looked online and only seen with hoses thanks
@traceyjones2010
4 жыл бұрын
@@lizwilliams6120 you can't it comes as an assemblya
@thestig1899
Жыл бұрын
Is there gas in the tank ? E
@mistycarroll9227
Жыл бұрын
Can this code cause an O2 sensor to come up too and did you guys have to do a smoke test to make sure it's right
@Chandlerite
Жыл бұрын
I suppose it could throw an 02 sensor code, as the engine typically runs rich when the purge valve isn’t functioning correctly. I did not do a smoke test - reset the CEL by clearing the code and ( if the purge valve was the issue) it should not come back on.
@mistycarroll9227
Жыл бұрын
@@Chandlerite mine keeps coming on and have been told best way to find out for sure is to have a smoke test done when we turn it off to put gas in then go to start it back up we have to push on the gas sometime to get it running again or wait a few mins
@marquittalexie6147
7 ай бұрын
So is there anybody in Savannah Georgia that can do this
@badiyan
3 жыл бұрын
I noticed no one shows how to reach and disassemble the two front connections !!!!! What's the easiest way to do so? Please anyone give a hand be appreciated. Thank you in advance.
@Chandlerite
3 жыл бұрын
It’s just a matter of getting in there and getting it done. It hurts and you’ll tear up your arm but it is doable.
@gl3605
Жыл бұрын
DO NOT DO THIS COLOSSAL WASTE OF TIME! Just change the purge valve. Buy Dorman part no 913-430. It also comes with quick connects..You won't have to bother trying to reach those stupid green and whte clips. I just did it and it solved the hard start after filling gas tank problem like a charm. No more P1450 code.
@brandonhousel266
Жыл бұрын
I’m so glad I read your comment! I have a 2017 Edge Titanium with the 2.0 EcoBoost. The hose going back toward the firewall has a connector. Did you cut that off and use the union that came with the kit?
@marvingiron9026
3 жыл бұрын
Did you disconnect the battery before messing with the car?
@lancepheng
Жыл бұрын
Just as much of a pain in the ass to replace simple light bulbs . Give your head a shake ford
@kellidubay9750
3 жыл бұрын
Is this the same as code p144c
@Chandlerite
3 жыл бұрын
Possibly. This should fix that code as well.
@randyhimes9000
3 жыл бұрын
Hard to listen to you talk with the annoying background music
@Chandlerite
3 жыл бұрын
It was an internal battle to add background music. In hindsight, you are correct.
@explorvistas-jimdiana145
2 жыл бұрын
IMovie has a way to lower the volume on that track. Great video otherwise!
@jasonerickson1033
Жыл бұрын
Sure I have the 2.7 liter way easier than that contraption
Пікірлер: 110