Don't forget to like, share, and subscribe for more in-depth dental tutorials and guides!
@muditkedia4893
Жыл бұрын
Can this be used as a permanent crown as an alternative to emax and zirconia? Also any glazing or staining required? Could you make a video about that? Thanks.. 😊
@InstituteofDigitalDentistry
Жыл бұрын
Great idea. We will make a video for this next covering optiglaze! Keep an eye out.
@muditkedia4893
Жыл бұрын
Thank you..😊
@NONcomD
10 ай бұрын
Yes it can
@Tk-sb310
8 ай бұрын
most likely this is a resin polymer crown of some sort. not as long lasting as ceramics and zirconia. in a pinch better than nothing or large composite. also resin crowns need occasional repolish because of shine dulling and stain absorption.
@ValhallaGuild
4 ай бұрын
Hows the strength of the crown? 300mpa?
@InstituteofDigitalDentistry
4 ай бұрын
Permanent crown resin strength depends on the resin manufacturer. It ranges from about 80 MPA on the low end (temp crowns) and ~200 MPA on the higher end.
@ValhallaGuild
4 ай бұрын
@@InstituteofDigitalDentistry obviously i meant sprint resin ceramic crown
@InstituteofDigitalDentistry
4 ай бұрын
@@ValhallaGuild my bad 😅answering this from an airplane between conferences so lost the context... Flexural Strength 136 MPA Shear Bond Strength 34.7 MPA Flexural Modulus 7.6 GPa
@Nanitotv
Жыл бұрын
Next video: bonding protocols 🙌
@effefffffffffffffffffffff
Жыл бұрын
Same bonding protocols as you would use for emax or a hybrid material. Sand blast the intaglio, prime and bond the intaglio. Etch, desensitize, and bond the tooth. Use your resin cement of choice.
Пікірлер: 13