Just built my first TrueNAS Scale box and your videos have been absolutely fantastic for Tailscale and all the other setup tasks. You're amazing Tom!
@moa4950
Жыл бұрын
Literally been putting off trying to install tailscale in case you did a video on it. Such a relief 🤩
@LAWRENCESYSTEMS
Жыл бұрын
Hope you enjoy it!
@IAMT4505
Жыл бұрын
Love your videos, Tom. A week ago I downloaded your whole pfSense playlist for emergency offline use and some other videos, thank you for the great guides. Appreciate you!
@DragonReborn100
Жыл бұрын
Just finished setting this up, got access to my whole home network through my mobile now. Glad i got unlimited data! Not much need for guacamole. I can close that port down now. Thanks Tom!
@LAWRENCESYSTEMS
Жыл бұрын
Very nice!
@realcameron
Жыл бұрын
spent several hours a week ago trying to make this work and then gave up, just for this to show up in my feed! Thank you much
@elreydetoda
Жыл бұрын
Awesome video! Also, I don't know if someone else has posted this (and its a hack, so know what you're doing when you do it) but if you need to access the TrueNAS dashboard via tailscale (instead of using it as a subnet router) then you can just check the "Host Network" box under the Network Configuration section. tl;dr: the container has access to the same networking your TrueNAS has. Be very careful with this though, and understand what this will do before you do it in production 😅. This effectively gives the tailscale container the same networking capabilities as your TrueNAS host.
@ilmisumitro1259
2 ай бұрын
Hello, I followed your steps, but my TrueNAS isn't showing on Tailscale devices..
@ragtop63
6 ай бұрын
I love how the caveat for replication was at the end of the video. I installed Tailscale for that exact purpose lol. Good news is, your instructions were easy to follow.
@rhb.digital
Жыл бұрын
must admit... I just love Tailscale... crazy its free too with 100 devices
@LAWRENCESYSTEMS
Жыл бұрын
Yeah, they are generous with their free service
@retezankarol6722
5 ай бұрын
Auth Keys 6 USD per user/month. Is another way to implement in TrueNas scale ?
@rebelangel66
Жыл бұрын
Where was this video yesterday when I was setting up tailscale on my parents truenas scale server to connect it to my pfsense box 😅. Thanks Tom very informative video gonna have to change a few things now when I next go to my parents.
@Jaredy89
Жыл бұрын
You can uncheck userspace while setting up tailscale and this will open tailscale to truenas environment, showing up in networks so you can do replications.
@LAWRENCESYSTEMS
Жыл бұрын
I thought that is what that did and I tested it but it still did not allow TrueNAS Scale talk to another TrueNAS scale for things like replication.
@Jaredy89
Жыл бұрын
@@LAWRENCESYSTEMS In my setup, I also have "bind to host network" at the bottom. Not sure if that makes a difference but I know I tried several different set ups until I made mine work.
@LAWRENCESYSTEMS
Жыл бұрын
It's both, uncheck user space and check host network.
@Jaredy89
Жыл бұрын
@@LAWRENCESYSTEMS I thought that was the case. Thanks for verifying and for all the truenas videos.
@adrianmarianpopoviciu215
Жыл бұрын
Did you manage to get Tailnet MagicDNS DNS working from Truescale by any chance?
@nicolofragile9241
10 ай бұрын
Hi, I followed the procedure, the app remains in deploying mode, maybe I need to open some ports on my router?
@jamescollier2049
9 ай бұрын
I have the same problem, were you able to fix this?
@ericalves8388
8 ай бұрын
I have the same problem too. How i can fix?
@supremeleader1043
2 ай бұрын
same issue. i tried restarting the system. or just deleting and redownloading it and it worked
@j03y__
2 ай бұрын
Mine was doing this and I forgot to KISS....I needed to click approve on the console
@trippvanmunch
4 ай бұрын
I have followed this guide and got everything set up, but how do I actually use it? How can I access anything remotely?
@joshua23928
23 күн бұрын
Thank you for this video, just built my first home server and was quite lost!
@gareth6628
29 күн бұрын
Hi im using Truenas Scale, with jellyfin and Immich for at home media back up etc, ive installed tailscale and set up so i can in theory access media or upload media while traveling, but Tailscale is saying my exit node is incorrectly set and has no ports open,, i honestly dont know how to remedy this or am i just not clicking the right thing?
@TonyBoston
Ай бұрын
I might have overlooked or misunderstood that part but is "--accept-routes" not an option? I'd like to get to another subnet from the truenas system.
@glennharrold2392
5 ай бұрын
Followed your video and got tailscale connected to my server. Tried the Iphone app and for the life of me cant work out why the server is not available. Tailscale and Immich are both running and ready for connections according to the logs in Truenas Scale. obviously its Immich not talking to Tailscale. Ill keep on investigating. Love the simplicity of your videos Tom.
@gravelfreeman
11 ай бұрын
The tailscale0 network interface isn't created when checking Host Networking. How did you manage to make it work?
@devonology
4 ай бұрын
Did you figure this out? I'm having the same issue now
@mitchellan-ebbott7408
4 ай бұрын
What's the reason behind using an app instead of installing it directly like you would on any other Linux OS?
@namanjoshi2528
2 ай бұрын
Hey, Is there to a way to access the Plex from TNS via TailScale ? as. TNS is now access remotely but I'm unable to access the Plex, any idea, how to do it ?
@Billyfelicianojp
5 ай бұрын
Thank you for the video, but now the only thing we need to know is how to access apps that have ports in truenas with tailscale.. Do you happen to have a video that talks about how to access your truenas apps with tailscale that have ports?
@parenall
4 ай бұрын
I have done all the steps you say and when I finish installing the program, it remains in deploying stucked. The version of TrueNas Scale is Dragonfish-24.04.0. If you could help me I would be grateful
@Thewickedjon
9 ай бұрын
ty for such a clearly explained video. This is grat stuff for noobs like me lolol now my truenas is on tailscale :D ty sir!!
@JordanStambaugh1
Жыл бұрын
With the recent update I can't get Tailscale to install (stuck in deploying...) unless I void TrueNas support and disable "hostpath security checks"...which I did, and I still can't finish installing tailscale. Pulling my hair out over this - it is not as simple as it's shown in this video anymore.
@LAWRENCESYSTEMS
Жыл бұрын
When it breaks just delete the instance, create a new key, and start over.
@JordanStambaugh1
Жыл бұрын
@@LAWRENCESYSTEMS I’ve done that probably about 6 times now. Same result every time.
@daillengineer
Жыл бұрын
@@JordanStambaugh1 have any other device on the network you can use for the tails cake install instead? I use my synology. I believe you can even use raspberry pie.
@JordanStambaugh1
Жыл бұрын
Sure. How would I route traffic from Jellyfin on my TrueNas through the other device?@@daillengineer
@JordanStambaugh1
Жыл бұрын
"it only routes traffic between devices running Tailscale, but doesn't touch your public internet traffic" so I don't think this would work. I'm just trying to allow remote access to my Jellyfin server but it sounds like Tailscale would need to be installed on all devices to be used as an exit node. @@daillengineer
@zyghom
7 ай бұрын
I just came back to this video as I set up 2 networks (far from each other, kind of few thousands of km) and I have them all in the same headscale network. So I wanted to have a replications between 2 TrueNAS scale servers. But i was looking for tailscale client on TrueNAS - not in the container. Unfortunately you confirmed: not working...
@Nels_Underscore
5 ай бұрын
In Truenas Scale 24.04 it no longer seems to bind tailscale as a network interface. Does anyone know how I could do this manually?
@victorruiz8048
Жыл бұрын
I have installed everything but my truenas machine does not shows on tailscale MACHINES
@SeanHenryLuvsDaDub
10 ай бұрын
Thanks Awesoeme. Another great video!!
@ericalves8388
8 ай бұрын
Every time I install the application and add the route, it stays in "developing", but as soon as I remove the route, it works normally, but I can't access it remotely. Can anyone help me?
@LoganStewart-rk4ok
3 ай бұрын
thank you for this video...lifesaver to me , being a noob
@lashram32
Жыл бұрын
Trying to get tailscale to punch through truenas to access the Qbittorrent web UI. Any guides or suggestions?
@IamDoQtorNo
6 ай бұрын
Howdy. Great couple of videos that address using tailscale. I am looking to setup my homelab. It's comprised of (3) metal box sql servers (development, test and production) running ontop of unbuntu only, nothing else loaded at present time. Same configuration on all 3 boxes. I am planning on setting up a production server for a client on their work site. I am looking to setting up a backup server to serve as sql backup for their data . Backup server will be located with the other 3 boxes. What's teh best way forward for this use case (Lawrence or anyone can provide insight , i will take advise)
@qem888
Ай бұрын
I followed this to a t. I have a running green tailscale on TNS and a green connect on tailscale but I get timed out when I try to access via the given ip address on tailscale. Am I missing something?
@raulalvarez21
Ай бұрын
same here. did you find a solution? thanks
@halftome
Жыл бұрын
Is there an easy way to setup certificates using tailscale for secure https access to the TrueNAS webUI?
@SmokinMoaksBBQ
Жыл бұрын
I still cant access my SMB shares on truenas though. How do i do that?
@UtubeFan316
Жыл бұрын
same here, did you figure out anything?
@daillengineer
Жыл бұрын
shouldn't be an issue. I can access my truenas SMB shares via Tailscale subnet from my Mac while im at my office. tailscale is installed on my Synology for subnet routing. I didn't use it on truenas like in this video.
@filds1
10 ай бұрын
Can you make a detailed guide for jellyfin. Im trying to host my media at sisters house. I been trying to setup on my phone first. But it just doesnt work
@daabest1
Жыл бұрын
Bless you for this Tom
@akanar_1924
Жыл бұрын
I set mine up this way but TailScale keeps using the relay instead of a direct connection which is super slow.
@m.2383
Жыл бұрын
For some reason mine is just stuck on 'deploying'. Fresh install from literally 10 minutes ago.
@m.2383
Жыл бұрын
Okay, so for anyone else who finds this: simply redo everything from scratch. Delete the app, then set it up again. TrueNAS scale seems to be quite unstable & gives me alpha software vibes. Core was a lot more reliable I feel.
@NishanSinghMann
Жыл бұрын
Thank you for posting this. However I'm unable to ping my other machines from within the tailscale container but other machines can ping the tailscale container just fine. Also I'm unable to access other resources within my home network even though exit code and advertise routes is setup as specified in this guide.
@Zandohaha
2 ай бұрын
Same. Can't get Nextcloud to find the server when using the Tailscale ip I just set up.
@Demish8
6 ай бұрын
I can't find the tailscale app in the available apps section
@AlwaysBolttheBird
10 ай бұрын
Unfortunately nothing works for me. All i get is connection refused. I installed it on my phone and ran a simple webserver on my phone and was able to connect to that but cannot connect to anything on my free nas box.
@alanedelstein_JS
9 ай бұрын
Same. Let me know if you figure out what the issue is. I have a feeling it has to do with how the network section of my Truenas Scale is set up?
@AlwaysBolttheBird
9 ай бұрын
@@alanedelstein_JS I honestly have up. I'm not saying it can't be done it's just above my head. Hopefully will figure something out
@choochoochar
8 ай бұрын
Try downloading from truenas repository and not truecharts
@WilliamLevasseur
Ай бұрын
I've had situations where, if you Edit the app, Tailscale will brick itself and not be able to reDeploy anymore. If that happens, I found that deleting the app and starting over solves the issue. More tech savy people than me may have a better fix...
@wpoole10
Жыл бұрын
Tom or ANYONE, How can I setup a permissions in a dataset to where I (dad builtin_admin) has full control and want my other users (wife and kid builtin_users) to be able to read and write files if they want, but not be able to delete anyone's files ONLY the ones they created/own? I am able to have each user write files to the dataset but the user that creates the file cannot delete their own file. If I give them modify permissions they can delete anything in the dataset. How do I fix this???
@jaylord55
Жыл бұрын
your are awsome sir i was trying for days to figure out this on my nas so i could allow my grandma to watch vids from jellyfin from her house while the server is at mine keep getting errors and here it was from me not setting it up correctly.
@gravelfreeman
11 ай бұрын
How to access Kubernetes applications using Tailscale?
@STONJAUS_FILMS
4 ай бұрын
been pulling my hair with other vpns for my truenas and cant believe this actually worked by just installing it ... wait WHAT
@LA-MJ
Жыл бұрын
And that pretty much sums up the issue with TrueNAS and it's k3s Frankenstein's monster
@Jniklas2
Жыл бұрын
What issue do you mean?
@DangoNetwork
Жыл бұрын
so TrueTail Scale²?
@LAWRENCESYSTEMS
Жыл бұрын
Or would it be TrueTail? 🤔
@emntbj
5 ай бұрын
Anybody knows how to access truenas apps using tailscale? Like nextcloud
@dand337
4 ай бұрын
I have the same problem, unless you bind to host you can't acess it. Have you solved this?
@emntbj
4 ай бұрын
Nothing so far, I had to put nextcloud on a different hardware as a standalone installation
@NicolaiWeitkemper
Жыл бұрын
Did anyone manage to access other Apps via Tailscale?
@BradleySmith1985
Жыл бұрын
vs synology?
@LAWRENCESYSTEMS
Жыл бұрын
Yes kzitem.info/news/bejne/2aVsvnmEkYR9knY
@s.z.6118
Жыл бұрын
What is it?
@urzu181
Жыл бұрын
A cool solution but its obviously much better to have Tailscale running on the firewall.
@dohyea6093
Жыл бұрын
I wondered about this, but what if the use case is simply remote users accessing files?
@APT4308
Жыл бұрын
🎉
@MegaMijit
Жыл бұрын
damn, wish he included instructions for truenas core
@LAWRENCESYSTEMS
Жыл бұрын
Not an option for using this on core
@rexnihilo5583
Ай бұрын
Not nearly enough info to be useful.
@StewartWright
Жыл бұрын
500
@theaquaking4020
27 күн бұрын
3:45 From where would i get the subnet route adress that you enetred here?
Пікірлер: 97