This video shows the process for removing the bumper on a Mercedes-Benz X-Class W470. Before beginning the work, the ignition should be switched off and the keys should be stored at least two meters away from the vehicle. The bonnet should be opened and the cover for the radiator cladding should be removed by removing all of the clips. The three expanding rivets behind the radiator grille, as well as the expanding rivets next to the left and right headlights, should be unclipped. The three screws on both sides in the front section of the interior fender should be unscrewed, and the expanding rivet should be removed. The spoiler underneath the bumper should be removed by unscrewing the eight screws and removing the spoiler, as well as the four screws underneath. The edges of the bumper should be protected with suitable material, and the two interior fenders should be removed. The fastening screw behind the bumper should be unscrewed, and a colleague should help unclip the bumper and disconnect the hose for the headlight cleaning system on the right side, along with the electrical plug connector for the fog light. All of the connectors on the left side should be disconnected, and the bumper can then be removed.
Steps:
Before you commence the work switch off the ignition and store the keys at least two meters away from the vehicle
open the bonnet and remove the cover for the radiator cladding
to do this you need to remove all of the clips
then unclip the three expanding rivets from behind the radiator grille
this is followed by the expanding rivets next to the left and right headlights
unscrew the three screws on both sides in the front section of the interior fender
afterwards remove the expanding rivet
then move on to the spoiler underneath the bumper unscrew the eight screws here and remove the spoiler
unscrew the four screws underneath as well
protect the edges of the bumper with suitable material
remove the two interior fenders and unscrew the fastening screw behind the bumper
have a colleague help you unclip the bumper and disconnect the hose for the headlight cleaning system on the right side along with the electrical plug connector for the fog light
disconnect all of the connectors on the left side and then you can remove the bumper.
Mercedes-Benz X-Class W470
--------------------------------------------------------------------------------------
instagram:
/ mbownersclub
twitter:
/ mb_owners
Негізгі бет Автокөліктер мен көлік құралдары Step-by-Step Guide to Removing and Installing the Front Bumper on a Mercedes-Benz X-Class W470
Пікірлер: 2