Always wondered about this. I find super glue is better as it sets faster however plastic glue allow for movement errors but is unforgiving if you accidentally get it on a model where super glue can be scrapped off. Thanks very informative.
@user-ro1cs5hp5e
Жыл бұрын
Ty! For using timestamps making it easier for everyone to watch the video
@MightyLancerGames
Жыл бұрын
Happy to help
@will4127
2 жыл бұрын
I am not a fan of Army Painter plastic glue. It's too viscous and tends to produce little strings when I remove the applicator. It's a mess. Tamiya Extra Thin, on the other hand, is fantastic, especially for small and thin connection points as the glue is very easy to control. It doesn't really work well for more loose-fitting joints, like Space Marine pauldrons, in which case something a little goopier like Citadel or Revell does the job quite nicely.
@MightyLancerGames
2 жыл бұрын
Just like paint ranges everyone has their favourites 😁
@odinulveson9101
2 ай бұрын
Army Painter IMO is best for paints. I combo speedpaint and their standard acrylics for brushing detailing. But the citadel glue one is.. ugh, the nozzle get stubborn to not letting the glue out, how you deal with that??. I screw off the top and the glue is fine, so I had to smear the glue unto the minis so I could glue them to the bases. Phuuu, the stench. Gotta ventilate
@odinulveson9101
2 ай бұрын
Fantastic video. Becasue I have... experiences. The Citadel one is utter garbago. Why? Well, the glue get stuck cant get out through the nozzle even after neddling the hole. The Army painter one did not come with the thin extender nozzle thingymajingy. Im about to order and try out Green Stuff worlds Skullglue ( looks awesome and have a small brush attached ) and Tamiya cement and extra thin cement. Have some Nolzur frameworks to put together which is on hefty sale. Like otherwishe they cost 17 dollarinos or ca 170 norwegian kroner but now down at 5 dollars or ca 50 kroner
@MightyLancerGames
2 ай бұрын
Always good to experiment and find what works for you
@grayfox2618
2 жыл бұрын
This video was very helpful, thank you!
@MightyLancerGames
2 жыл бұрын
Awesome, glad we could help
@RottenJeeves
2 жыл бұрын
Not a fan of Tamiya Extra thin. It does not hold well for smaller models. I find that I have to go back and redo my stuff with super glue.
@MightyLancerGames
2 жыл бұрын
Everyone is different, good job there are so many to choose from
@Mark-2509
2 жыл бұрын
Can the Tamiya Extra Thin Cement be used for Resin Models?
@MightyLancerGames
2 жыл бұрын
No, it’s not really designed for resin
@Mark-2509
2 жыл бұрын
@@MightyLancerGames Thanks for the reply. Which glue would I need for resin from your site?
@MightyLancerGames
2 жыл бұрын
You need superglue. We use Javis yellow top, links don’t work in here but a search for superglue should show it up, hope that helps
@user-ro1cs5hp5e
Жыл бұрын
So basically it's possible to use super glue to bend all types of plastic model kits.?
@1AngelAlita
2 жыл бұрын
Army Painter plastic clue didn't work for me well, Super glue is better but it dries quickly in the bottle. I've recently bought Citadel plastic glue, as I've heard good things about it..
@Snavels
2 жыл бұрын
If glue ever gets stuck or dried in the nozzle, Just light the end of it with a lighter. Not exactly the most practical way, but it should work, and it won't immediately explode. If the end stays on fire, You can easily blow it out. I'd advise looking at videos on this if it ever does happen just to make sure you know what you're doing
@josecarlosxyz
2 жыл бұрын
Don’t use bottles dude
@thehonestaspy102
2 жыл бұрын
Have you got any tips on what to do if superglue frosts?
@MightyLancerGames
2 жыл бұрын
Frosting is normally caused by a build up of fumes. If possible make sure air is flowing around the superglued part and avoid your fingers getting in the way of air flow by using tweezers. Hope that helps
@thehonestaspy102
2 жыл бұрын
@@MightyLancerGames thank you thats really helpful, they were in a well ventilated room but sadly still frosted, just trying to work out how to remove it now 😅
@MightyLancerGames
2 жыл бұрын
We have heard that rubbing a cotton bud soaked in nail varnish removed over the frosting will remove it BUT we have never tried it
@thehonestaspy102
2 жыл бұрын
@@MightyLancerGames thanks so much I'll try it on one and see how it goes!
@erenayyalcn78
3 ай бұрын
This tamiya quick setting cement brush is bigger than the other classical tamiya green brush ?
@MightyLancerGames
3 ай бұрын
oo this video is 3 years old now so does not get many comments but honestly I am not sure, it is a little brush but I have never compared the sizes of brushes in the range so I cannot provide a reliable answer I am afraid
@monocerotis6917
Жыл бұрын
Best glue is - Plastic magic from deluxe its brutal good!!!
@MightyLancerGames
Жыл бұрын
🙂
@clonecaptainration2974
Жыл бұрын
I have a fire and Ice model, its baratheon sentinels. Do anybody know what type of glue i should be using?, can I use tamiya extra thin cement?
@MightyLancerGames
Жыл бұрын
They are models like the Reaper bones material so we would use Superglue
@clonecaptainration2974
Жыл бұрын
@@MightyLancerGames thanks alot :)
@MightyLancerGames
Жыл бұрын
No worries
@citizenphaid1880
2 жыл бұрын
I’ve heard a lot of people say the tamiya quick setting isn’t actually a glue but rather an accelerator. Can you confirm that please?
@MightyLancerGames
2 жыл бұрын
Tamiya quick setting is a cement for model kits that has a quicker setting time than standard Tamiya Extra Thin Cement, dries clear and has a brush applicator.
@LaMOi1
9 ай бұрын
I’m new to this.. I got REVELL CONTACTA… I really don’t get it? I was sitting there, gluing the sword to the hand of my chaos, warrior, and glue simply wasn’t hardening? I don’t get it ? In the end, I gave up . …..
@MightyLancerGames
9 ай бұрын
Hello. Welcome to the hobby. Are the miniature and the sword both plastic?
@LaMOi1
9 ай бұрын
I assume?? It’s games workshop, Warhammer, Chaos Warriors. I think they might even be age of Sigmar, new designs. So my presumption is is that all of games workshop’s main miniature range is made of plastic right ?
@MightyLancerGames
9 ай бұрын
ok so if both parts are plastic then Revell should be fine. It acts different to super glue, Revell cement 'melts' both parts of the plastic to 'melt' them together. (The extra thin version dries very fast). If it is not working, try scrapping both connection points to get off excess glue before adding more (you do not need alot) & hold it together longer @@LaMOi1
@LaMOi1
9 ай бұрын
@@MightyLancerGames So should I file it down??
@MightyLancerGames
9 ай бұрын
you can, gently, just to reveal bare plastic @@LaMOi1
@josecarlosxyz
2 жыл бұрын
Can’t you just use plain super glue for plastic polyesthirene models?
@MightyLancerGames
2 жыл бұрын
You can but it does not produce as solid a join
@mousetouse
Жыл бұрын
Great vid but your backing track drove me insane
@MightyLancerGames
Жыл бұрын
Sorry
@82spoon82
Жыл бұрын
Came to your video because I'm using Tamiya no odour contact cement and it is melting the s*** out of my miniatures so I switch to superglue
@MightyLancerGames
Жыл бұрын
We do not sell that one but anything that says its poly’ cement melts/ fuses the plastic together thats how it works which is why it is no good for metal minis.
Пікірлер: 54