Who won the battle? was it the Carhart Champion Leroy? The Tallboi Lachy? Or David '303 Uncle Fester' Dr Honeysmack Acid Guy?
@KHTCKHTC
Жыл бұрын
I think it wasn't about who won or lost, it was about the sequences we made on the way
@maikvanrossum
Жыл бұрын
I thought it’s since version 2.0 that Arturia also added the ‘one midi channel per pad’ for the drums section of the BeatStep Pro, which you have to setup through the Drum Map in the controller software. The Drum Map also makes it possible to remap the Note used for the drum sound. Both come in handy when drum sounds / samples are on multiple channels or instruments.
@franciscojaviergomez4807
Жыл бұрын
SQ-64 is fantastic !!!!
@montxsuz
5 ай бұрын
Not sure why, but I happen to own all 3 of these sequencers, and not for that long, so I am a newby at all of them. This review left me a bit unsatisfied, but it spurred me on to try out all 3 - synced together. The syncing in itself was a bit of a technical challenge. But I managed to make a DAW-less song using 4 legacy hardware synths, and recorded it. The Arturia BSP was the master, that was easier. Anyways, here is my quick feedback. The Arturia BSP is the easiest to use. Why? It is the only one which allows you to create the sequence in software, then save it to hardware. You don't need a course to get started. The other two forces you to learn obscure button sequences. The learning curve of the Torso T-1 is the steepest and deepest - but it is by far the most powerful of the three in terms of flexibility, generation and randomisation. Best suited for melody composition. But the software is the weakest, can't do much with it at all. The Korg SQ-64 is somewhere in the middle: the hardware is fairly powerful and not easy, the software is not great at all, but at least you can easily backup your sequence to your hard drive once you've learned the buttons. Oxi? Dunno. Can't afford it now.
@richardlynneweisgerber2552
3 ай бұрын
Which one has the most stable master clock? Thanks!
@montxsuz
3 ай бұрын
@@richardlynneweisgerber2552 I was only able to use the Arturia BSP as master. I tried the other two, but could not even get them working as master, esp over the Arturia. So I would say the BSP.
@richardlynneweisgerber2552
3 ай бұрын
@@montxsuz Thank You. I am considering my Presonus Quantum 2626 as the Master Clock for my studio. DAWless, my BSP. I am a bit stymied on what percussion gizmos for the 8 Gates channels. DIY little $5 individual 'percussion' devices with a DIY Multiplexer for one I will do anyways. But, under $1k, who makes the 'most' versatile drum module? An old Alesis for starters, but... I just need some clues. Reviews generally focus on the unit itself. The one I did find was a Composer DIY Genius on his demo. ;-) Thanks!
@jodd5534
Жыл бұрын
beatstep is very nice and simple, but Torso is on another level from the other two, its not even a fair comparison, and also its twice the price
@maikvanrossum
Жыл бұрын
You’re absolutely right… for that price tag one could almost buy a Beatstep Pro + a Keystep Pro.
@benzmobil
11 ай бұрын
I had beatstep pro and now have t1 . I would say the t1 can quite replace the beatstep pro (which I loved too) and add a lot more on top. But the main thing with t1 is how fast you can create a full track with it. The speed of workflow is unmatched.
@hermask815
Жыл бұрын
If you didn’t include the keystep pro, can you make a comparison with the novation sl mk3 ?
@tolikfilter
Жыл бұрын
You didn’t even scratch the surface of torso features and it’s like comparing Honda Civic and Toyota Corolla with Koenigsegg. A fair comparison would be torso, hapax and oxi one
@paradockz
10 ай бұрын
this is the video i'm looking for right now lol
@rustyjaw
7 ай бұрын
100%, I have the BSP and Torso, and while both are great at what they do, the Torso operates at a whole other level. I like to give folks the benefit of the doubt, but when he starts off by saying it “has a lot of knobs, 16” I kinda just have to laugh. It has 18 knobs, my man! It makes me wonder how much time was spent learning it’s very deep feature set.
@romanyel
10 ай бұрын
I was looking for something similar to Keystep Pro and went with SQ64. Both have 4 tracks but SQ has 64 projects. KSP only has 16. I see the T1 has 8 tracks and 64 projects but cost twice what the SQ cost and 1/3rd more than KSP.
@sammadden5540
Жыл бұрын
Would love one of these on live 11 controllers
@sunnyfpv3694
4 ай бұрын
To me, the BSP visually looks like an average daw with its tracks making it easier to start working with
@PatternMusic
Жыл бұрын
The T-1 is my secret superpower. (Maybe not so secret any more!) I have both a T-1 and a Beatstep Pro. And they are both very capable. But they exist on different ends of the spectrum. I had a SQ-64 for a little while, and I sent it back. It just didn't seem to be worth the effort to get past what I felt were significant fundamental shortcomings.
@dr.feelicks2051
Жыл бұрын
V1 or 2?
@PatternMusic
Жыл бұрын
@@dr.feelicks2051 I tried the SQ-64 v1 and v2. Neither worked well for me.
@ReformedWhiteKnight
5 ай бұрын
Which midi splitter did you use for the midi clock to sync all of the hardware (with the Arturia)? Please let us know! Cheers! ;-)
@nostandingonlydancin
Жыл бұрын
Sweet paprika. I’ll let fresh chilli do the heavy lifting for heat.
@dpalaoro
27 күн бұрын
Can any of these sequencers imitate the tuning each step feature of a moog 960? And not just a semitone but any frequency.
@realmchat6665
4 ай бұрын
The 8 track sequencer in my Novation SL61 MK3 seems to beat out anything else I've seen so far.
@sompfy
7 ай бұрын
What does the number 1 mean in each window? Beststep pro. You send midi Channel on each Sequenz to another Synth? Or all on channel 1?
@mathiasfriman8927
6 ай бұрын
Those 01 numbers are patterns. MIDI channels are set in a different way, usually one per track. You have 16 patterns per track that you can mix and match with the other tracks. Here they just have pattern 01 selected on all tracks. You can also chain patterns in some particular order if you want to. Like 01-01-01-02-04-04-03-14 and then that track will loop through those patterns and start over. Kinda neat.
@richardlynneweisgerber2552
3 ай бұрын
@@mathiasfriman8927it took me a 'bit' to figure-out how to undo the person who made this an Open Box buy left the first track on 02. heh ;-)
@sullycliftona888
Жыл бұрын
I must be really thick. I just can’t use the step sequencer beat step pro .. I’m that close to selling it
@iloveACID
Жыл бұрын
Nooooooo you're not thick. Hope you worked it out. 😊 we all have product overloads
@bretsimon6125
Жыл бұрын
T1 hands down ,that’s the one that belongs to 21st century
@Sepelman
7 ай бұрын
Who won the battle? 🤨
@richardlynneweisgerber2552
3 ай бұрын
Which one can run DOOM?
@touthowzander
Жыл бұрын
The beat step pro could really use a firmware upgrade. It seems like it has so much unused potential 😭😭
@Noisegate
Жыл бұрын
What would you like to see from the next firmware update?
@touthowzander
Жыл бұрын
@@Noisegate maybe.. Being able to change midi CC and drum notes on the machine, rather than in the editor. A MIDI Control Track, or more. And if they could put out a web editor, it could solve a lot of that also.
@CantComply
Жыл бұрын
@@Noisegate it would be neat if we can record live transposing in a sequence, also trying to copy patterns between step pages is impossible. Gotta use the editor for that. Not sure what else but those are some things ive noticed
@kudre7
5 ай бұрын
copy pattern feature would be great, manbe arpergiator as well :D
Пікірлер: 46