Low resistance 50K Ohms secondary parallel soldered 3x3mm trim pots are too low resistance for full response curve activation, meaning calibration to 100% digital stick range is not reached for throttle move & max look in game turn speeds.
The DS4 pad 🎮 uses 10K Ohms resistance primary potentiometers.
(Note: Dualsense PS5 control pads 🎮 seem to have replaced the 10K potentiometers with 2K3? Ohm potentiometers)
High resistance trim pots seem to be preferable to capped off max control range under optimal response curve range of motion, keeping circuit 🔋current⚡ closest to initial primary digital logged resistance value in parallel to primary pot current 🥴🤤😵💫 🧠🤯.
If you understand that I solute 🫡 🫵🏻 👍🏻😁👍🏻.
7 part repair study link below for the community to fact check for me, if you have the information to help me out 👍🏻😁👍🏻 🎮.
I'm not certain about my information on video 3, not owning an Ohms tester for initial potentiometer resistance values above or below 10K Ohms for DS4 🎮 specifically.
What is preferable for 100% full tilt outer response curve range, using
Test Circularity on Gamepad tester web site??? gamepad-tester.com/
The deadspot 🎯 calibration & size knowledge is not the only thing to consider my fellow struggling gamers, full 100% range with calibration wriggle room overhead must be attained 😉.
(hard work on worn potentiometer sides to achieve, replace them with higher initial resistance then select the appropriate trim pot value to draw them in at max range value, also shrinking the deadspot position 👍🏻😁👍🏻)
Playlist:
Stick drift recalibration fully understood!!!
• Stick drift recalibrat...
With respect to the pioneers of my studies for key refinement knowledge:
Branch Education:
How do Video Game Controllers Work? || Exploring a PS4 Game Controller
• How do Video Game Cont...
The founding monstrosity 👍🏻😁👍🏻 control 🎮
("It's alive" 😂)
SolderKing:
Understanding stick drift and a mod for getting rid of it FOREVER. Xbox One.
• Understanding stick dr...
The resultant stick drift fix product as show cased by
Macho Nacho Productions:
How to Fix Joystick Drift Permanently!
• How to Fix Joystick Dr...
Experimental working knowledge with
xeostube:
Why do you never hear about stick drift in the PS2?
• Why do you never hear ...
Refined down the core working concept.
sthetix:
THE ULTIMATE WAY TO FIX ANALOG STICK DRIFTS? PS4 PS5 XBOX ONE NINTENDO PRO CON AND MANY MORE
• THE ULTIMATE WAY TO FI...
Негізгі бет Ойындар Stick Drift calibration fails with 50K ohms secondary trim pots. (1 of 7 calibration assumptions)
Пікірлер: 6