Use code DIYHP10% at checkout for 10% OFF your order here yeswelder.com/?ref=DIYHP10%25 YesWelder MIG 250 PRO - Spool Gun Compatible yeswelder.com/products/aluminum-mig-welder-mig250sg?ref=DIYHP10%25
@No_contest
3 күн бұрын
Huge help, no welder but been in the trades 25 years and well versed. I’ve always loved picking the welders brains and given it a go a few times. Picked this welder up to fabricate some aluminum and now playing with the other capabilities. This was a great video and really helped dial it in, thanks bud!
@DIYHomesteadProjectsDIYHP10
3 күн бұрын
I appreciate the comment and thanks for stopping by!
@1mw4tch1ng
4 ай бұрын
Weld look good for first time stick weld. I also purchase the Yes welder mig 250 pro last year and have not used it yet or tried the stick feature from it. Will buy the stick and will give it a try.
@DIYHomesteadProjectsDIYHP10
4 ай бұрын
Thank you! That is a very nice machine IMO. I think you're really going to like it!
@kentuckytrapper780
Жыл бұрын
Ain't nothing wrong with that weld, looks great and I think it will be there long after we're gone, excellent job.
@DIYHomesteadProjectsDIYHP10
Жыл бұрын
Thank you
@cutweldngrind
2 жыл бұрын
I have big hands and I feel like the electrode holder is a toy on the ArcPro165. I also do lots of hobby stuff on my channel and only used the yeswelder 2 or 3 times. I'm impressed on how light the machine is. I used a 6" pipe for my vise stand. I might give their Tig Machine a try.
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
One of my favorite YesWelder machines is the TIG 250P. It's small and light but powerful enough to weld anything I need to weld. It also has a temp controlled fan so it's not screaming the whole time it's on. I really like it's smooth and stable low amperage arc. YesWelder has some nice discounts being offered at the moment so it's a good time to pick one up if you're serious about getting one. You may also be able to get a 10% discount buy using the code DIYHP10% at checkout if the machine you want is not on sale. I am a sub to your channel and I really like your build videos. Nice work! Here is a link to YW for your convince if you're wanting to look around. yeswelder.com/?ref=DIYHP10%25
@markashlock9017
2 жыл бұрын
You made that look too easy. Nice work Bruce!
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Thanks again Mark! It's definitely not easy for me. I always feel like I need more practice. :)
@shaunsmuder1637
Жыл бұрын
That was not a bad weld, I've seen worst welds on professional equipment
@DIYHomesteadProjectsDIYHP10
Жыл бұрын
Thanks I appreciate that
@mikep8861
2 жыл бұрын
You can run 6013 on this welder? The manual says only 7018. I just bought this welder but something doesn’t seem right. The manual says only 1/8” 7018 rods can be used but aint 1/8” rods only good for about 160 amps? The specs on welder says the machine is capable of 220 or 225 amps on stick welding mode so something not adding up
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Yes you can run 6013 on this welder. You can run many different sizes and types of rods on this welder. Most if not all stick welders will run a 6013 rod including this machine.
@mikep8861
2 жыл бұрын
@@DIYHomesteadProjectsDIYHP10 thanks for the help. Appreciate it. Love your videos👍
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Thank you for the support Mike, I appreciate it. I wish you the best with your welding ventures.
@frankish5314
Жыл бұрын
Something is NOT right! Today I did some testing on this machine with a calibrated DC amp meter. On stick welding mode the max this machine would go to is 193amps.. Even though the display said 225 which is the max it will go to on stick mode. Now thats plenty for say a 5/32nd 7018. Then on MIG mode for Aluminum (synergy) it will go to 210A (display says 250). But on all the steel modes, even manual mode the welder will only do in the 175 to 180Amp range. Now if you want to weld thicker steel you might be able weld on the AL(s) mode with 210A, but adjust the voltage bias. Strange behaviour. I also had a Tooliom welder 250-TL and its pretty clear these are exactly the same welder in a different case because it behaves the same way.
@coyotethumper1536
2 жыл бұрын
Damn nice Welds, don’t sell yourself short, those look Good 😊
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Thank you Rod, I appreciate that!
@YT-User1013
2 жыл бұрын
So, you've reviewed both the 250Amp AC/DC TIG Aluminum Welder With Pulse and the PrimeWeld TIG225X AC/DC TIG Welder With Pulse. If they both cost the same, which would you choose between these two?
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
I prefer the YesWelder TIG 250P AC/DC. I really like the digital control interface over all the control pots. I'm also a big fan of the temperature controlled fan over the constant loud fans of the PW.
@mcruz4056
2 жыл бұрын
what setting did you use? nice finish overall Thank you for your videos
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
I used 120 amps and 6 on the inductance. I show the settings I used in this short video. kzitem.info/news/bejne/ln56qomPoXWDg2U
@Rodgarc32
2 жыл бұрын
Pretty nice. Was that on a cv setting
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Thanks Rod. I'm not aware of a CV setting in the stick mode with this machine. I just had the machine set on stick mode and ran the welds.
@Rodgarc32
2 жыл бұрын
@@DIYHomesteadProjectsDIYHP10 I only asked because you used a mig welder to run stick. MIG welders us cc or cv. Just thought I'd ask if you could change from CV to CC for stick?
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Oh I understand now. I guess technically this is a "multi process" machine and not MIG only machine. My impression is it is primarily a MIG machine but it will also do TIG and MMA as well. Sorry, I didn't mean to mislead you.
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
I think I may need to change the thumbnail so it's more accurate.
@Rodgarc32
2 жыл бұрын
@@DIYHomesteadProjectsDIYHP10 No need just looked it up. Your good it's a power source for multiple applications. Great for diy projects. For a 60% duty cycle it's a nice little machine . Welds good. Keep up the good work
@elflordsjourneys
2 жыл бұрын
If your interested here's a link to jessie James channel kzitem.info/news/bejne/2KxqrqqNo39_pno
@DIYHomesteadProjectsDIYHP10
2 жыл бұрын
Interesting, I was just thinking about his channel a couple of days ago. Thanks for the link! Do you know what happened to his other channel?
@elflordsjourneys
2 жыл бұрын
They have scaled back on the homestead, they are more into camping and other things , he has alot of welding vids.I think the new channel is better.
Пікірлер: 35